16x2 Summing Mixer- 16 Channel Class-A mix bus- Silk Red & Blue modes with texture controls for precise control of sound characteristics- Very low crosstalk for a wide stereo image and a sonic depth- Cascadable via bus link with multiple 5057 units- Input impedance: 16 K Ohm- Frequency response: 10 to 50000 Hz: +/- 0.1 dB- Max. input level at 1 kHz: +26 dBu- Max. output level at 1 kHz: +26 dBu- Distortion factor (from 22 Hz - 22 kHz): 0 dBu at 1 kHz: 0.003%, +20 dBu at 1 kHz: 0.0006%- 2 x DB25 inputs (TASCAM standard) and XLR outputs- Can be combined with other Rupert Neve Designs summing units via Buss Link- Dimensions (W x D x H): 483 x 229 x 44 mm- Weight: approx. 4 kg

Reduces feedback without filtering the signal- Increases the level of a microphone to feedback in a live sound environment by up to 20 dB- Ideal for vocals- Depth and threshold adjustable- Time Constant RMS Mode: A: 50ms, B: 100ms, C: 200ms, D: 750ms, E: 1.5s, F: 3s- Time Constant Peak Mode: Attack time: 20mS fix- Release time: A: 20mS, B: 200mS, C: 1S, D: 2S, E: 5S, F: 30S- Maximum output level: 25dBu- Dimensions: 19" / 1U

True Tape Emulator and Line-Driver- API 500 Format- Tape saturation emulator- Trim control ( /-12 dB PreTape Level Control)- Tape saturation effect can be set in a ·stepless manner- Silk function (Silk Red and Silk Blue) can be set in a ·stepless manner- Blend potentiometer determines the balance of Pre and Post-Tape signals- The tape characteristic can be switched between 15 IPS and 30 IPS- Drive Meter shows the Signal Level on the "Record Headf"- Enclosure: API Serie 500 Rack Format

16 Channels- Insert, level and pan per channel- 2 Stereo outputs with texture control- Silk and Silk+ can be added continuously per bus- Neve custom transformer- 100% Discrete ClassA circuitry- Flexible routing for easy integration of outboard equipment- Dimensions: 19" 2 U- Weight: 6.4 kg

Active Mono DI Box Custom transformer for classic Neve sound Discrete Class A FET amplifier High input headroom of 20.5 dBu Max. output level: 11.5 dBu Input impedance: 22 mOhm Robust steel housing Switchable ground lift THRU output: 6.3 mm jack Note: Requires 48 V phantom power

10-Fold Rack for Up to Ten 500 Modules- XLR and 6.3 mm jack input and output per channel- LED display for power consumption- VCA buses in channels 1-2, 3-4, 5-6, 7-8, 9-10 can be activated in pairs via ink jumpers- Integrated power supply 90 - 240V- Type: 19"

Microphone Preamplifier- 1 Channel Mic preaamp with 500 Module formfactor- 48V Phantom power can switched On and Off- 8 Segment LED Level-Meter- High Pass Filter can be set, 20 - 250 Hz- Trim and Gain-Control- Polarity is reversible/can be switched- Silk Mode- Formfactor: 500 Module- Required voltage/power: /-16VDC 100 mA

Analog Stereo Master Processor- High-pass filter adjustable from 15 Hz - 100 Hz- 2-Band shelf EQ section with 3 octaves range and +/- 9 dB gain- Colour Comp - Opto Compressor: Ratio switchable between 2:1 or 5:1, variable high-pass side-chain filter and blend control- Width section for stereo base widening- Super Silk section: Silk Red and Blue modes for precise enhancement of overtone structures, Harmonics control increases overall overtone content- Output Trim for perfect gain staging- Dimensions: 19" / 2 U

8 Channels I/O with XLR, jack and SubD/DB25 connectors- LED Metering for electricity consumption monitoring- 48V Phantom power available per channel- +/- 16 VDC- Channel 7-8 thru connections can be used as a way to quickly and easily convert your signal from/to DB-25, XLR, and TRS connectors- 3 Link jumpers can be set to allow linking on channels 1-2, 3-4 and 5-6- Solid steel chassis- Dimensions (L x W x H): 330 x 190 x 139 mm- Weight: 4.31 kg

High-End Headphone Amplifier- Based on the headphone amplifier section of the Rupert Neve Designs 5060 Centerpiece- Three switchable inputs (XLR, RCA, mini-jack)- Solid steel housing- Output impedance: 0.08 Ohm at 1KHz- Frequency response: +/- 0.2 dB from 10 to 12,0000 Hz- Power supply: 24 V via an external 6 Watt power supply unit (included in the scope of delivery)- Dimensions (W x D x H): 165 x 117 x 48 mm

1-Channel Feedback Controller- Reduces feedback without filtering the signal- Increases the level of a microphone up to feedback in a live sound environment by up to 20 dB- Ideal for vocals- Adjustable depth and threshold- Fast: Allows you to choose between two time constants- Peak: Returns to the output level faster and recognises transients more quickly- Design: API Series 500 rack format

Superior phase coherence- Rupert Neve custom transformer- Input headroom of +21.5 dBU- Power supply 48 V phantom power- Ground lift- Instrument and speaker mode for various applications- Connections: in - 6.3 mm jack, thru - 6.3 mm jack, out - XLR

2-Channel compressor- Stereo link or 2x mono- 75 V technology- Catch-up gain -6 dB up to +20 dB- Parallel compression adjustable- Texture control for Silk and Silk+ mode- Musical limiter- Stereo field editor- Flexible routing allows independent dynamic processing of mid and side channels- Extensive level meter- Input/output connectors: XLR- Sidechain send/return connector: 6.3 mm jack- Ground lift switch- Format: 19" / 2 U- Weight: 9.7 kg

Compressor- Threshold range: Adjustable from -25 dB to +20 dB in 31 rasterized steps- Ratio: Switchable from 1.5: 1 to 8: 1 in six steps- Timing rotary switch: Six-digit rotary switch, with which the attack and release times of the compressor are adjusted- Fast switch: Shares the attack and release times of the timing presets- Blend knob to mix dry and wet signal- Link function- Sidechain HPF at 150 Hz- Rasterized gain amplifier from -6 dB to +20 dB in 31 steps- 8-Segment LED meter for level and level reduction- Type: 500 Module

Active Stereo DI Box- With Rupert Neve Custom Transmitter- Input headroom of +21.5 dBU- Power supply via 48 V phantom power- Ground lift switch per channel- 2x Input 6.3 mm jack- 1x 3.5 mm mini jack- 2x Thru 6.3 mm jack- 2x XLR output

2-Channel A / D converter / limiter- 24 Bit / 192 kHz converter- Converter input with switchable signal path: transformerless class A signal path or via interstage audio transformer with RND Silk Red and Blue circuit- Analog limiter section with class A line amplifier stage up to 20 dB- Controllable threshold and release- Switchable sidechain connection with tunable high-pass filter from 20 - 250 Hz- Limiter can be used either in dual mono or stereo mode- Analog inputs: 2x XLR- Digital outputs: AES, S / PDIF, TOSLINK- Word Clock In / Out- 2 x 22-segment level LED meters- 2 x 8-segment gain reduction LED meters- Peak hold option- Format: 19"/ 1 U- Weight: approx. 4 kg

3-Band Inductor (coil) EQ - 500 Series- Low EQ: +/-15 dB shelf or peak- Selectable for 35 Hz, 60 Hz, 100 Hz or 220 Hz- Mid EQ: +/-15 dB with 6 centre frequencies: 200 Hz, 350 Hz, 700 Hz, 1.5 kHz, 3 kHz and 6 kHz- High / Peak switch to increase the Q-factor- Hi shelf: +/-15 dB shelf or peak, selectable for 8 kHz and 16 kHz- Lo cut: 12 dB / octave design at 80 Hz- Rupert Neve custom transformer- Design: API series 500 rack format

Rupert Neve Custom Transformer- Max input level 21 dBu ( 31 dBu with pad on)- Power supply via 48V phantom power per channel- Ground lift and pin 1 isolate per channel to eliminate hum pickup- -10dB pad- 6.3mm Jack In- 6.3mm Jack Thru- XLR out- Dimensions: 19" / 1U

2-Channel Diode Bridge Compressor- Custom transformer and class A line amplifier- Stereolink or 2x mono- Integrated parallel compression- Input impedance: 10 kOhm- Output impedance: 40 ohm- Maximum input level (+4 dBu selected): +26.7 dBu- Maximum output level: +26.7 dBu- Noise floor: (22 Hz - 22 kHz BW): -104 dBu- Frequency response (10 Hz to 120 kHz): +/- 0.25 dB- THD+N @1 kHz @ maximum level (22 Hz - 22 kHz BW): 0.0008%- Compressor Noise specifications: Noise at 0dB make-up gain (22 Hz - 22 kHz BW): -84.5 dBu, noise at +20dB make-up gain (22 Hz - 22 kHz BW): -64.5 dBu- Detented control with 31 steps- Input/output connectors: XLR- Sidechain send/return: 6.3 mm jack- Groundlift switch- Format: 19"/ 1 U- Weight: Approx. 4 kg

Compressor (500 Series)- Preamplification: stepless from 6 dB to 20 dB- Threshold range: stepless from 36 dB to 22 dB- Ratio range: stepless from 1.1: 1 to limit (40: 1)- Attack range: stepless from 20 mS to 75 ms- Release range: infinitely variable from 100 ms to 2.5 seconds- FF / FB: Feed-Forward or Feed-Back VCA control- Maximum output level: balanced and floating transformer output- Max. Output from 20 Hz to 40 kHz is 23 dBu- Total Harmonic Distortion and Noise: @ 1 kHz- 20 dBu output level- No load- Main Output, compressor bypassed: better than 0.0006%- Main Output, compressor activated: better than 0.02%- Noise: measured at the main output- Unweighted- 22 Hz-22 kHz- Terminated 40 Ohms- Frequency range: Main output- Unity Gain @ 18 Hz- /- 3 dB. @ 150 kHz 3 dB- Crosstalk measured channel to channel: 90 dB @ 15 kHz- Monitor INPUT LEVEL and GAIN REDUCTION- Construction: API Series 500 rack format