| Vicoustic : VicStudio Box White
- For acoustic optimisation of studio rooms- Set consists of: 8x Wavewood Ultra Lite, 2x DC2 Multifuser, 2x Flexi Glue Ultra- Colour: White- Made from standard MDF and melamine- Suitable for the absorption of medium frequencies- Optimal effective range: 315 - 1000 Hz- Can be used as bass traps when ...(+) - For acoustic optimisation of studio rooms- Set consists of: 8x Wavewood Ultra Lite, 2x DC2 Multifuser, 2x Flexi Glue Ultra- Colour: White- Made from standard MDF and melamine- Suitable for the absorption of medium frequencies- Optimal effective range: 315 - 1000 Hz- Can be used as bass traps when installed at 45° in the corners of the room- Dimensions per piece: 595 x 595 x 45 mm- Diffuser is made from EPS (expanded polystyrene)- Optimises room acoustics- Dimensions per piece: 600 x 600 x 147 mm |
|
| the t.akustik : HiLo-N40
(1774 comments)
- Material: HiLo-F acoustic foam made of polyurethane with high rigidity and low density- Knob height: 30 mm- Total height: 40 mm- Gross density 16.5 ± 1.0 kg / m³- Compression hardness at 40% deformation: 4.0 ± 0.7 kPa- Tensile strength: At least 100 kPa- Elongation at break: At least 80%- Flame re...(+) - Material: HiLo-F acoustic foam made of polyurethane with high rigidity and low density- Knob height: 30 mm- Total height: 40 mm- Gross density 16.5 ± 1.0 kg / m³- Compression hardness at 40% deformation: 4.0 ± 0.7 kPa- Tensile strength: At least 100 kPa- Elongation at break: At least 80%- Flame retardant according to MVSS 302 = SE (self-extinguishing)- Panel dimensions: 1000 x 500 x 40 mm- Price per piece- Suitable adhesive: Article no. 481723 (not included) |
|
| the t.akustik : CBT-37
- Absorber for improving a rooms acoustics- Especially suited for absorption of low frequency sound waves- Material: Polyurethane soft foam material- Bulk density: 25,0 kg / m³ +/- 5%- Reaction to fire: burning rate < 100 mm / min. MVSS 302- Colour: Grey- Dimensions:370 x 370 x 600 mm- Packing dimen...(+) - Absorber for improving a rooms acoustics- Especially suited for absorption of low frequency sound waves- Material: Polyurethane soft foam material- Bulk density: 25,0 kg / m³ +/- 5%- Reaction to fire: burning rate < 100 mm / min. MVSS 302- Colour: Grey- Dimensions:370 x 370 x 600 mm- Packing dimensions (HxBxD) : 600 x 380 x 380 mm- Includes 2 pieces- Suitable acoustic adhesive for attachment: Article Nr. 177265 (not included) |
|
| the t.akustik : ISO-Pad 6
- For acoustic decoupling of studio monitors- An isolation pad consists of two components, which allows you to change the position of the monitor both horizontally and in 2 different angles (4° and 8°)- Load-bearing capacity per pad: 14 kg- Measurements (W x H x D): 210 x 40 x 300 mm- Colour: Anthra...(+) - For acoustic decoupling of studio monitors- An isolation pad consists of two components, which allows you to change the position of the monitor both horizontally and in 2 different angles (4° and 8°)- Load-bearing capacity per pad: 14 kg- Measurements (W x H x D): 210 x 40 x 300 mm- Colour: Anthracite- Package quantity: 1 Pair |
|
| Hofa : Diffusor natur
(284 comments)
- Effective acoustic elements for the optimization of room sound- For the best possible acoustic, for example, in recording studios, home cinemas or home-recordings- For the optimization of room reflections in the mid and hi-mid frequencies- Two-dimensional QRD-Diffuser- Design in untreated birch pl...(+) - Effective acoustic elements for the optimization of room sound- For the best possible acoustic, for example, in recording studios, home cinemas or home-recordings- For the optimization of room reflections in the mid and hi-mid frequencies- Two-dimensional QRD-Diffuser- Design in untreated birch plywood- For professional and better working conditions in recording and control rooms- For an audiophile Hi-Fi listening experience- Can be combined with the HOFA Frame for flexible room acoustics- Dimensions: 500 x 500 x 110 mm- 36 Internal divisions, each 8 cm x 8 cm- Weight: approx. 2 kg- Colour: Natural |
|
| the t.akustik : Highline CBT1 Silver Spruce
(47 comments)- Absorber for optimizing room acoustics- Especially suitable for the absorption of low-frequency sound waves- Material: Polyester acoustic foam- Flame-retardant according to FMVSS 302 Burn rate |
|
| Clearsonic : S2466x2 (S5-2D) Sorber
(150 comments)
Two-Section Absorber Panel- Made of compressed fibreglass and encased in dark gray cloth- Both panels are joined together with a fabric tape and can be used freestanding- The panel can also be mounted on the inside of the acrylic ClearSonic shields to reduce the amount of reflected sound, or used as...(+) Two-Section Absorber Panel- Made of compressed fibreglass and encased in dark gray cloth- Both panels are joined together with a fabric tape and can be used freestanding- The panel can also be mounted on the inside of the acrylic ClearSonic shields to reduce the amount of reflected sound, or used as sound absorbers on the walls of a studio, basement, church etc.- Dimensions per piece: 1670 x 609 x 38 mm- Colour: Dark grey / Anthracite |
|
| the t.akustik : Diffusor Manhattan GR eps set
(16 comments)
- Made of hardened EPS foam- For optimising room reflections and room sound- Suitable for recording studios, radio stations, home recording, and hi-fi rooms- Effective range: Approx. 900 - 3,250 Hz- Easy assembly and disassembly- Dimensions: 600 x 600 x 150 mm- Box contains 2 units as a kit includin...(+) - Made of hardened EPS foam- For optimising room reflections and room sound- Suitable for recording studios, radio stations, home recording, and hi-fi rooms- Effective range: Approx. 900 - 3,250 Hz- Easy assembly and disassembly- Dimensions: 600 x 600 x 150 mm- Box contains 2 units as a kit including assembly instructions- One kit consists of 13 single elements- Colour: Graphite |
|
| the t.akustik : Contact Glue
(1523 comments)
Acoustic Adhesive- For acoustic convoluted, pyramids and basotect- Solvent-free- Elastoplastic- Single-component special polymer adhesive- Fast-curing and more universal than structural and assembly adhesives- Especially for the punctual and all-over adhesion of soundproofing and acoustic elements m...(+) Acoustic Adhesive- For acoustic convoluted, pyramids and basotect- Solvent-free- Elastoplastic- Single-component special polymer adhesive- Fast-curing and more universal than structural and assembly adhesives- Especially for the punctual and all-over adhesion of soundproofing and acoustic elements made of foam in particular melamine and polyurethane foam- Adheres to customary construction substrates such as concrete, plaster, masonry, cement and wood- 310 ml/ 490 g Cartridge- For 0.5 m² to 3 m² depending on the substrate and adhesive technology (punctual/ all-over)- Note: Working temperature + 5° C to + 50° C- Storage: Cool and dry at + 5° C to + 25° C- Skin building time: 10 - 15 min- Colour: White- Consistency: Pasty- Base: Polymer dispersion- Spec. mass: Approx. 1.58 g/cm- Protect from frost and heat- Suitable hand-held cartridge gun: Article Nr. 417630 (not included)- New follow-up product: Article Nr. 481723 (not included) |
|
| Auralex Acoustics : Roominators D 36-DST Burgundy
- Set designed for the so-called "spot treatment" (selective acoustic room treatment)- Roominator D36 kits offer you a good basis for reducing unwanted flutter echoes in your set up- Dimensions per panel (L x W x H): 305 x 305 x 50 mm- Total surface area: Approx. 3.24 m²- 18x DST-112 panels (anthrac...(+) - Set designed for the so-called "spot treatment" (selective acoustic room treatment)- Roominator D36 kits offer you a good basis for reducing unwanted flutter echoes in your set up- Dimensions per panel (L x W x H): 305 x 305 x 50 mm- Total surface area: Approx. 3.24 m²- 18x DST-112 panels (anthracite)- 18x DST-114 panels (burgundy)- 2x Tubes of Tubetak Pro adhesive |
|
| the t.bone : Micscreen XL
(358 comments)
- Reduces the transmission of unwanted room effects such as reflections, background noise and echoes via the microphone- Portable and equally suitable for studio, live applications, vocal and instrument acceptance- The 5 segments of the screen can be opened and closed in different positions and can ...(+) - Reduces the transmission of unwanted room effects such as reflections, background noise and echoes via the microphone- Portable and equally suitable for studio, live applications, vocal and instrument acceptance- The 5 segments of the screen can be opened and closed in different positions and can therefore be easily adapted to the shooting situation- Can be mounted on any standard microphone stand or placed directly on a table top without a tripod- Width: 16 - 80 cm (each segment is 16 cm wide)- Height: 32 cm- Weight: Approximately 2.70 kg |
|
| the t.akustik : SA-N30 18pc set
(41 comments)- Includes 18 convoluted foam sheets- Material: Polyurethane flexible foam- Bulk density: 25.0 kg / m³ +/- 5%- Fire behaviour: Burning rate |
|
| the t.akustik : Diffusor Manhattan eps set
(96 comments)
- Material: Cured EPS foam- For the optimisation of acoustic reflections and room sound- Suitable for sound studios, radio stations, home recording and hi-fi rooms- Effective range: approx. 900 - 3250 Hz- Can be painted or varnished with water-based paints (use solvent-free paints only!)- Easy to as...(+) - Material: Cured EPS foam- For the optimisation of acoustic reflections and room sound- Suitable for sound studios, radio stations, home recording and hi-fi rooms- Effective range: approx. 900 - 3250 Hz- Can be painted or varnished with water-based paints (use solvent-free paints only!)- Easy to assemble and disassemble- Dimensions (W x D x H): 600 x 600 x 150 mm- One kit consists of 13 individual elements- Colour: White- Includes: 2 Pieces as a kit plus assembly instructions- For preparing and fixing, acoustic adhesive (177265) is recommended |
|
| the t.akustik : Iso-Pad 5
(2461 comments)
- For acoustic decoupling of studio monitors- Each ISO-Pad consists of two components, which allows you to change the position of the monitor both horizontally and in 2 different angles (4° and 8°)- Load capacity per pad: 12 kg- Material: Foam- Dimensions (W x H x D): 170 x 40 x 300 mm- Colour: Anth...(+) - For acoustic decoupling of studio monitors- Each ISO-Pad consists of two components, which allows you to change the position of the monitor both horizontally and in 2 different angles (4° and 8°)- Load capacity per pad: 12 kg- Material: Foam- Dimensions (W x H x D): 170 x 40 x 300 mm- Colour: Anthracite- Quantity: 1 Pair |
|
| t.akustik : Producer Set S Basic Bundle offer comprising:- t.akustik WDS-7 GR Diffuser 8pcs Set- 6 piece(s) t.akustik Contact Glue Liquid- Thomann Hand-Kartuschenpistole- 2 t.akustik WAS-7 Absorber 8pcs Set- 4 t.akustik CBT-37 |
|
| the t.akustik : Wedges 30
(116 comments)- Material: Flexible polyurethane foam- Bulk density: 25.0 ± 5%- Compression hardness at 40% deformation: 5.0 ± 0.5 kPa- Tensile strength at least 100 kPa- Elongation at break min. 80%- Flame retardant according to MVSS 302 (burning rate |
|
| t.akustik : Producer Set S Premium Bundle offer comprising:- 8 t.akustik Diffusor Manhattan GR eps set- 13 piece(s) t.akustik Contact Glue Liquid- 12 t.akustik Highline CBT1 Silver Spruce- 5 t.akustik Highline A1 Silver Spruce- Thomann Hand-Kartuschenpistole |
|
| the t.akustik : DS5-5 Drum Shield
(17 comments)
- Transparent 5-segment panel for live and studio use- Sound- and noise shielding for drum kits, amplifiers or instruments- Indispensable for controlling volume on stage and in the studio and for clean mixes- Easy to handle thanks to an accordion-style foldable design- Material: Very high-quality la...(+) - Transparent 5-segment panel for live and studio use- Sound- and noise shielding for drum kits, amplifiers or instruments- Indispensable for controlling volume on stage and in the studio and for clean mixes- Easy to handle thanks to an accordion-style foldable design- Material: Very high-quality laser cut acrylic- Consists of 5 panels with connectors (hinges)- Thickness per panel: 5.5 mm- Dimensions per panel (H x W): 1660 x 600 mm- Weight: Approx. 36.0 kg |
|
| the t.akustik : HiLo-P80
(621 comments)
- Material: HiLo-F acoustic foam made of polyurethane with high rigidity and low density- Pyramid height: 60 mm- Total height: 80 mm- Bulk density 16.5 ± 1.0 kg / m³- Compression hardness at 40% deformation 4.0 ± 0.7 kPa- Tensile strength: At least 100 kPa- Elongation at break: At least 80%- Flame r...(+) - Material: HiLo-F acoustic foam made of polyurethane with high rigidity and low density- Pyramid height: 60 mm- Total height: 80 mm- Bulk density 16.5 ± 1.0 kg / m³- Compression hardness at 40% deformation 4.0 ± 0.7 kPa- Tensile strength: At least 100 kPa- Elongation at break: At least 80%- Flame retardant in accordance with MVSS 302 = SE (self-extinguishing)- Panel dimensions: 1000 x 500 x 80 mm- Price per piece- Suitable adhesive: Article no. 481723 (not included) |
|
My account (login)
GUITAR & BASS
DRUM & PERCUSSION
PIANO & KEYBOARD
BRASS & WIND
VIOLIN & TRAD.
STUDIO
SOFTWARES
PA
LIGHTING
DJ
MICROPHONES
VIDEO
EFFECTS
FLIGHTCASES
CABLES
ACCESSORIES
KIDS
GIFT
