| Harley Benton : TrueTone T-20
(184 comments)Piezo Transducer Pickup- For acoustic guitars, gypsy and resonator guitars, ukuleles and mandolins, etc. - Maple case - Simple assembly - Instrument surface is unaffected - Long-lasting adhesive included - Includes cable with jack socket - can be attached to the belt pin |
|
| Harley Benton : HB-T
(617 comments)
PickupIf an acoustic instrument is desired to be amplified without great effort, or if you have an instrument that you do not want to "disimprove" with holes, then the Harley Benton HB-T Single Transducer pickup is just right. The piezo pickup is simply attached to the instrument and plugged into th...(+) PickupIf an acoustic instrument is desired to be amplified without great effort, or if you have an instrument that you do not want to "disimprove" with holes, then the Harley Benton HB-T Single Transducer pickup is just right. The piezo pickup is simply attached to the instrument and plugged into the output socket, which is also easy to attach. Also note, the pickup was developed by Dieter Kaudel, formerly guitarist of the Würzburg band Munju! - Highly recommended!- Made by Shadow - For acoustic instruments - Universally applicable - Single-Transducer for gluing - Standard size - 20 mm diameter - Fixed cable - Length 30 cm - Output jack 6.3 mm jack with velcro holder |
|
| Schertler : CA-M-Ext cable condenser micro Cable for condensation microphone |
|
| Artec : FTE-3
(7 comments)Note: Without pickup! |
|
| Gewa : Multiphon Microfon Pickup
(17 comments)Universal Pickup- For all string instruments - Crystal microphone with suction button fastening - Fixed 3 m cable |
|
| Harley Benton : TrueTone SH-20
(121 comments)Magnetic Soundhole Pickup For Steel-String Guitar- Single coil - Suitbale for guitars with steel strings - Passive, noise-free design (no preamp required) - Maple housing - Easy installation - Fits all standard soundholes - Cable length: 4 m - Connection: 6.3 mm jack |
|
| Shadow : SH711
(58 comments)Pickup- For acoustic instruments - Universal application - Single transducer for sticking with mounting adhesive - Standard size, 20 mm diameter - Includes fixed cable, length 30 cm - Output 6.3 mm jack with velcro fasteners |
|
| Artec : ETN-4 Preamp
(31 comments)Livré sans micro |
|
| TAP : ENJ Endpin Jack Preamplifier
(0 comments)Endpin Jack Preamplifier- Active preamplifier built into the jack socket - With 9 V battery connection |
|
| Artec : MSP-50 ENN
(205 comments)Pickup For Sound Hole- Suitable for acoustic guitars with steel strings - Endpin jack connection - Passive |
|
| Fire and Stone : Piezo Pickup w. remov. cable
(13 comments)Piezo Pickup- Universal Model - For gluing onto the instrument - Wooden housing - With detachable cable - Cable length: 2.4 m - Cable end: Mono jack plug, 6.3 mm - Pickup dimensions: 49 x 39 x 10.7 mm |
|
| Shadow : SH097
(31 comments)Pickup- For concert guitars - Piezo bridge installation - Can be installed out of sight under the original saddle - Height: 1.8 mm - Suitable for standard bridge slots with a width of 2.3 mm - Length: 7 cm |
|
| Superlux : HI 10 Small Membrane Condenser Microphone- Especially for hihat and acoustic guitar - Polar pattern: cardioid - 50 - 18,000 Hz - 200 Ohm - Max. SPL: 134 dB - 9 - 48 Volt Phantom power - Small housing: 21 x 94 mm - Weight: 120 g |
|
| Fishman : Neo-D SingleCoil
(136 comments)Pickup- For sound hole mounting - Brilliant acoustic open articulation - Little background noise - Passive, requires no battery - Fast and secure installation |
|
| Superlux : D10B
(163 comments)Dynamic Instrument Microphone- Supercardioid - Frequency range: 50 - 16,000 Hz - Impedance: 250 Ohm - Ideal for classical guitars, amplifiers, stringed instruments and wind instruments - Dimensions: 42.5 x 144 mm - Weight: 220 g - Bag and microphone holder included |
|
| Artec : Edge Z
(52 comments)
Preamp for acoustic guitars- Upper bout version 3-band EQ - Presence control - Volume control - Phase switch - Built-in tuner with LCD display - Battery status indicator - "Inner Clamp System" (no screws required for installation) - FLIP-HOOD system to change batteries simple and quick - Requires 9 ...(+) Preamp for acoustic guitars- Upper bout version 3-band EQ - Presence control - Volume control - Phase switch - Built-in tuner with LCD display - Battery status indicator - "Inner Clamp System" (no screws required for installation) - FLIP-HOOD system to change batteries simple and quick - Requires 9 V battery - Dimensions (H x W x D): 90 x 56 x 42 mm - Colour: Black - Incl. Output jack - Without pickup |
|
My account (login)
DRUM & PERCUSSION
PIANO & KEYBOARD
BRASS & WIND
VIOLIN & TRAD.
STUDIO
SOFTWARES
PA
LIGHTING
DJ
MICROPHONES
EFFECTS
FLIGHTCASES
CABLES
ACCESSORIES
KIDS
