Ideal for vocals and acoustic guitars- Very clean sound- Low cut switch- Polar pattern: Cardioid- Frequency range: 20 - 20,000 Hz- Impedance 200 Ohm- Sensitivity: -48 dB, 4mV / Pa- Maximum sound pressure level: (k = 1%): 136 dB- Audio connector: 3-pin XLR connector- Requires 9-52 V phantom power- Without switch- Incl. Mount and storage box for transport- Weight: 240 g, light

Easy installation with various instrument holders for many different instruments (not included)- Flexible gooseneck 120 mm for easy alignment on the instrument- Detachable cable with screw contact- 3-pin mini XLR plug for use with t.bone wireless systems (also suitable for Sirus and AKG wireless systems)- Polar pattern: Cardioid- Frequency range: 30 - 20.000 Hz- Sensitivity: -38 dB +/- 2 dB- Max. SPL: 130 dB- Signal-to-noise ratio: 71 dB- Impedance 100 Ohm- Distortion factor: < 1%- Cable length approx. 2 m- Incl. Windscreen, phantom power adapter (phantom power required) and hard case (with space for an optional holder)- Dimensions of the hard case (L x W x H): 26 x 13 x 7 cm

Easy installation with different instrument holders (optional - not included)- With phantom power adapter (phantom power required)- Removable cable with screw contact- Directivity: Cardioid- Frequency range: 20 - 20,000 Hz- Flexible goose neck for easy alignment on the instrument- Cable with Sennheiser EW connector for Sennheiser EW wireless systems- Length of gooseneck: 130 mm- Cable length: 1.2 m- Optional cable with Shure TQG plug and 3-pin TQG plug for the t.bone and AKG systems sold separately (not included)- Includes foam windscreen

the t.bone Ovid System CC 100 Condenser lip Microphone for Ovid System- Directional characteristic: Cardioid- Frequency response: 20 - 20,000 Hz- Flexible gooseneck for an easy instrument setup- 3-Pin Mini XLR connector for operation with t.bone wireless systems (also suitable for AKG wireless systems)- Gooseneck length: 130 mm- Cable length: 2 m- Easy to install and can be used with different instrument clips (not included, must be ordered separately)- Includes an XLR phantom power adapter (phantom power required) and a foam windshield the t.bone Ovid System Violin Clip Modular violin microphone holder for the Ovid system- Easy installation without tools- Black rubber end pieces protect the instrument from damage- Adjustable up to approx. 4.5 cm body width- Thumbscrew- Also suitable for mandolin and similar instruments the t.bone Ovid System Case Plastic Case- With recess for all Ovid system microphone clamps and the CC 100 microphone- Outer Dimensions: 30 x 23 x 7.5 cm

1" Gold membrane- Polar pattern: Super-cardioid- Frequency range: 20 - 20,000 Hz- Sensitivity: 23.3 mV / Pa- Equivalent noise level: 18 dB (A)- Output impedance: 120 Ohm- Peak SPL: 132 dB- Internal low cut switch at 100 Hz with 6 dB- Requires +48 V phantom power- Weight of the microphone: 351 g- Colour: Black- Shock mount and bag included

the t.bone Ovid System CC 100 Condenser lip Microphone for Ovid System- Directional characteristic: Cardioid- Frequency response: 20 - 20,000 Hz- Flexible gooseneck for an easy instrument setup- 3-Pin Mini XLR connector for operation with t.bone wireless systems (also suitable for AKG wireless systems)- Gooseneck length: 130 mm- Cable length: 2 m- Easy to install and can be used with different instrument clips (not included, must be ordered separately)- Includes an XLR phantom power adapter (phantom power required) and a foam windshield the t.bone Ovid System Piano Clip Microphone Clip- Modular piano microphone clip for Ovid systems- Easy to install without tools with enclosed adhesive tape the t.bone Ovid System Cello Clip Modular cello microphone holder for Ovid System- Easy installation without tools- Black rubber end caps protect the instrument from damaging- Set screw- Width: 59 mm the t.bone Ovid System Bass Clip Modular double bass microphone clip for Ovid systems- Easy to install without tools- Black rubber end caps protect the instrument from damage- Locking screw- Width 47 mm the t.bone Ovid System Flute Clip Modular Flute Microphone Clip- For Ovid systems- Easy to install without tools- Also suitable for transverse flute, clarinet etc. the t.bone Ovid System Sax Clip Modular saxophone microphone clip for Ovid systems- Easy to install without tools- Black rubber end caps protect the instrument from damage- Locking screw- Also suitable for trumpet, trombone etc.- Not suitable for soprano saxophone the t.bone Ovid System Violin Clip Modular violin microphone holder for the Ovid system- Easy installation without tools- Black rubber end pieces protect the instrument from damage- Adjustable up to approx. 4.5 cm body width- Thumbscrew- Also suitable for mandolin and similar instruments the t.bone Ovid System Guitar Clip Modular Guitar Microphone Clip for Ovid systems- Easy to install without tools- Black rubber end caps protect the instrument from damage- Locking screw- Max body width 12.5 cm the t.bone Ovid System Case Plastic Case- With recess for all Ovid system microphone clamps and the CC 100 microphone- Outer Dimensions: 30 x 23 x 7.5 cm

the t.bone Lucan System CC 200 RC Condenser instrument microphone- Easy installation with various instrument holders for many different instruments (not included)- Flexible gooseneck 120 mm for easy alignment on the instrument- Detachable cable with screw contact- 3-pin mini XLR plug for use with t.bone wireless systems (also suitable for Sirus and AKG wireless systems)- Polar pattern: Cardioid- Frequency range: 30 - 20.000 Hz- Sensitivity: -38 dB +/- 2 dB- Max. SPL: 130 dB- Signal-to-noise ratio: 71 dB- Impedance 100 Ohm- Distortion factor: < 1%- Cable length approx. 2 m- Incl. Windscreen, phantom power adapter (phantom power required) and hard case (with space for an optional holder)- Dimensions of the hard case (L x W x H): 26 x 13 x 7 cm the t.bone Lucan System CC 200 VH Microphone Mount- Violin clip for the Lucan System CC 200 RC- Suitable for clamping to violins or similar instruments with a thickness of 35 to 55 mm