| Lewitt : LCT 140 Air Matched Pair
(28 comments)
- Matched pair- Polar pattern: Cardioid- Frequency response: 20 - 20000 Hz- Sensitivity: 14.6 mV/Pa, -36.7 dBV/P- Max. SPL: 135 dB- Low cut: 80 Hz (12 dB/oct)- Pad switch: -12dB- Dynamic range: 115 dB- Switchable sound characteristic: Air/Flat- Dimensions: 24 x 140 mm- Weight: 66 g- Colour: Black- I...(+) - Matched pair- Polar pattern: Cardioid- Frequency response: 20 - 20000 Hz- Sensitivity: 14.6 mV/Pa, -36.7 dBV/P- Max. SPL: 135 dB- Low cut: 80 Hz (12 dB/oct)- Pad switch: -12dB- Dynamic range: 115 dB- Switchable sound characteristic: Air/Flat- Dimensions: 24 x 140 mm- Weight: 66 g- Colour: Black- Incl. 2 microphone clips, 2x windshield and carrying bag |
|
| Haun : MBC660 L
(29 comments)
- Cardioid characteristics- Exclusively made for Thomann- German production- Matching microphone clip: Art.#151248 or Art.154142 (both not included)- Spare capacity held capsule at the output: 1 kOhm- Noise voltage according to DIN 45405: 2 V- THD (for 40-20000Hz): 0,5%- Supply voltage: 22-48 V- S...(+) - Cardioid characteristics- Exclusively made for Thomann- German production- Matching microphone clip: Art.#151248 or Art.154142 (both not included)- Spare capacity held capsule at the output: 1 kOhm- Noise voltage according to DIN 45405: 2 V- THD (for 40-20000Hz): 0,5%- Supply voltage: 22-48 V- Supply current: 1.8 mA- Electrical impedance at 1 kHz: 200 Ohm- Open circuit voltage at 1 kHz at 1 m distance: 8 mV/Pa- Max. SPL: 126 dB- Noise ratio in accordance with DIN 45590: 72 dB- Equiv. SPL according to IEC 179: < 15 dB A- All test values at: 48 V |
|
| Rode : NT5 S Bundle
(24 comments)
Rode NT5 S True Condenser Microphone-
With gold sputtered 1/2" diaphragm-
Cardioid-
Satin nickel finish-
Very low noise-
Full frequency response-
Active electronics: JFET impedance converter-
Frequency range: 20 Hz to 20 kHz-
Sensitivity: -38 db at 1v / Pa + -2 dB-
Maximum output: +13.9 dBu...(+) Rode NT5 S True Condenser Microphone-
With gold sputtered 1/2" diaphragm-
Cardioid-
Satin nickel finish-
Very low noise-
Full frequency response-
Active electronics: JFET impedance converter-
Frequency range: 20 Hz to 20 kHz-
Sensitivity: -38 db at 1v / Pa + -2 dB-
Maximum output: +13.9 dBu-
Dynamic range: >128 dB-
Signal to noise ratio: 78 dB-
Weight: Microphone 100g-
Phantom power required (18V - 48V)-
Including windshield, tripod adapter and case-
Including 10 years manufacturer warranty K&M 27105 Microphone stand Thomann Type I-
Plastic base-
Height is adjustable from 900 to 1600 mm-
Boom arm: 810 mm-
Weight: 2.3 kg-
Colour: Black Cordial CAM 9 BK Professional Microphone Cable-
Length: 9 m-
Original Neutrik NC 3 FXX-BAG + NC 3 MXX-BAG XLR plugs-
Cable type: CME 220 Black-
Thomann hook-and-loop fastener included-
Colour: Black |
|
| beyerdynamic : MC-930 Stereo Set
(85 comments)
- 2x Condenser Microphones Beyerdynamic MC-930- 2x Windscreen WS 53- 2x elastic suspension EA 19/25- Case- For chorus, overhead and instrument pickup- Characteristics: Cardioid- Frequency response: 40 - 20000 Hz- Sound pressure Max 125 dB (140 dB with pre-attenuation)- Switchable pre-attenuation - 1...(+) - 2x Condenser Microphones Beyerdynamic MC-930- 2x Windscreen WS 53- 2x elastic suspension EA 19/25- Case- For chorus, overhead and instrument pickup- Characteristics: Cardioid- Frequency response: 40 - 20000 Hz- Sound pressure Max 125 dB (140 dB with pre-attenuation)- Switchable pre-attenuation - 15 dB- Switchable low-cut 250 Hz |
|
| AKG : C 451 B
(143 comments)- Ideal for overhead, hihat, percussion, acoustic guitar- Polar pattern: cardioid- Nickel plated- Switchable HP (75/ 150 Hz) and pad (-10/ -20 dB)- CK 1 capsule- Includes windshield W90 and stand adapter SA60 |
|
| the t.bone : Lucan System Complete Bundle
the t.bone Lucan System CC 200 RC Condenser instrument microphone-
Easy installation with various instrument holders for many different instruments (not included)-
Flexible gooseneck 120 mm for easy alignment on the instrument-
Detachable cable with screw contact-
3-pin mini XLR plug for use wit...(+) the t.bone Lucan System CC 200 RC Condenser instrument microphone-
Easy installation with various instrument holders for many different instruments (not included)-
Flexible gooseneck 120 mm for easy alignment on the instrument-
Detachable cable with screw contact-
3-pin mini XLR plug for use with t.bone wireless systems (also suitable for Sirus and AKG wireless systems)-
Polar pattern: Cardioid-
Frequency range: 30 - 20.000 Hz-
Sensitivity: -38 dB +/- 2 dB-
Max. SPL: 130 dB-
Signal-to-noise ratio: 71 dB-
Impedance 100 Ohm-
Distortion factor: < 1%-
Cable length approx. 2 m-
Incl. Windscreen, phantom power adapter (phantom power required) and hard case (with space for an optional holder)-
Dimensions of the hard case (L x W x H): 26 x 13 x 7 cm the t.bone Lucan System CC 200 GH Microphone Mount-
Guitar clip for the Lucan System CC 200 RC-
Suitable for clamping onto guitars or similar instruments with a thickness between 73 and 120 mm the t.bone Lucan System CC 200 BH Hardcase-
For the Lucan System CC 200 RC-
With space for all system components (microphone, phantom adapter, cable, 1x holder each GH, VH,CH, PH,MH,SH)-
Dimensions (L x W x H): 33 x 22 x 7 cm the t.bone Lucan System CC 200 VH Microphone Mount-
Violin clip for the Lucan System CC 200 RC-
Suitable for clamping to violins or similar instruments with a thickness of 35 to 55 mm the t.bone Lucan System CC 200 CH Microphone Holder-
Clarinet-clip for the Lucan System CC 200 RC-
For fixing on clarinets or similar instruments with a strong hook-and-loop tape up to a diameter of 65 mm the t.bone Lucan System CC 200 PH Microphone Mount-
Piano clip for the Lucan System CC 200 RC-
Suitable for fixing on pianos or similar instruments with strong magnets the t.bone Lucan System CC 200 MH Microphone Mount-
Multi-Clip for the Lucan System CC 200 RC-
Suitable for clipping onto cello, saxophone, trombone, cornet or similar instruments with a thickness up to 23 mm the t.bone Lucan System CC 200 SH Microphone Mount-
Tripod clip for the Lucan System CC 200 RC-
Suitable for screwing onto all stands with a standard 5/8" thread |
|
| AKG : C1000s MKIV
(289 comments)
- Cardioid/ hyper cardioid (changeable with PPC)- Operates with 48V phantom power or 2x 1.5 V AA battery- Switch with battery LED- Plug on HF shelf with PB-1000- Frequency range: 50 Hz - 20 kHz- Electric impedance: 200 Ohm- Sensitivity: 6 mV/ Pa (-44 dBV)- Max. SPL: 137 dB- Diameter: 34 mm- Length: ...(+) - Cardioid/ hyper cardioid (changeable with PPC)- Operates with 48V phantom power or 2x 1.5 V AA battery- Switch with battery LED- Plug on HF shelf with PB-1000- Frequency range: 50 Hz - 20 kHz- Electric impedance: 200 Ohm- Sensitivity: 6 mV/ Pa (-44 dBV)- Max. SPL: 137 dB- Diameter: 34 mm- Length: 220 mm- Weight: 275 g- Colour: black- Incl. transport bag, wind shield and clamp |
|
| beyerdynamic : MC-930
(15 comments)- For choir, overhead and instrument pickup- Characteristics: Cardioid- Frequency response: 40 - 20000 Hz- Sound pressure Max 125 dB (140 dB with pre-attenuation)- Switchable pre-attenuation - 15 dB- Switchable low-cut 250 Hz- Including microphone clamp- Optional WS 53 draft shield |
|
| AKG : C 430
(79 comments)- Cardioid- Ideal for cymbal/ overhead miking- Phantom power- Incl. windshield W32- Incl. tripod adapter SA60 |
|
| the t.bone : RB 100 FetAmp Bundle the t.bone RB 100 Ribbon Microphone-
Characteristics: Figure-8-
Frequency range: 30 Hz - 15 kHz-
Sensitivity: -54 dB-
SPL max. : 148 dB-
Impedance: = / |
|
| Audio Technica : AT5045
(2 comments)
- Large single membrane in a compact housing- Especially for the overhead-acceptance of all acoustic instruments like guitar, strings, percussion, etc.- Directivity: Cardioid- Frequency range: 20 - 20,000 Hz- Boundary sound pressure: 149 dB- Sensitivity: -35 dB (17.7 mV) re 1V @ 1 Pa- Requires 48 V ...(+) - Large single membrane in a compact housing- Especially for the overhead-acceptance of all acoustic instruments like guitar, strings, percussion, etc.- Directivity: Cardioid- Frequency range: 20 - 20,000 Hz- Boundary sound pressure: 149 dB- Sensitivity: -35 dB (17.7 mV) re 1V @ 1 Pa- Requires 48 V phantom power- Aluminium-copper case- Dimensions: 177 x 25 mm- Weight: 197 g |
|
| Shure : SM81
(93 comments)
- Cardioid directivity for maximum isolation of the signal source and reduced background noise- High quality, permanently polarised condenser microphone- Linear frequency response for precise sound reproduction- Low inherent noise and high overdrive protection- Distortion-free recordings even at hig...(+) - Cardioid directivity for maximum isolation of the signal source and reduced background noise- High quality, permanently polarised condenser microphone- Linear frequency response for precise sound reproduction- Low inherent noise and high overdrive protection- Distortion-free recordings even at high sound pressure- Low sensitivity to interference at high-frequencies- 3-Step switchable high-pass filter: Linear, 6 or 18 dB / octave reduction- Switchable 10 dB attenuation- Phantom power in accordance with DIN 45 596 with voltage from 12 to 48 V- Robust steel version- Can be used even under extreme temperature and humidity conditions- Frequency range: 20 Hz / 20 kHz- Output impedance: 85 Ohm- Sensitivity: -45 dBV / Pa (5.62 mV)- Total Harmonic Distortion (131 dB SPL at 250 Hz, 800 Ohm load): < 0.5 %- Maximum sound pressure (at 1 kHz, 800 Ohm load): 136 dB SPL- Windshield and microphone clamp included |
|
| Shure : KSM 137 Stereoset
- Optimized for acoustic instruments- Neutral and precise sound for stage and studio applications- Ideal for overhead, hi-hat, piano, choir and orchestra and acoustic stringed instruments- Ultra-thin, 2.5 micron, 24 karat gold-layered, low mass Mylar® diaphragm for superior transient response- Gold...(+) - Optimized for acoustic instruments- Neutral and precise sound for stage and studio applications- Ideal for overhead, hi-hat, piano, choir and orchestra and acoustic stringed instruments- Ultra-thin, 2.5 micron, 24 karat gold-layered, low mass Mylar® diaphragm for superior transient response- Gold-plated internal and external contacts- Polar pattern: cardioid- Frequency response: 20 Hz - 20 kHz- Sensitivity: -37 dBV / Pa- Switchable pad: 0 dB, -15 dB, -25 dB- SPL: 164 dB (with switched -25dB pad)- Three-stage switchable low cut filter- 14 db (A) very low self noise for a small diaphragm condenser microphone- Robust housing- Weight: 100 g- Includes A137C plastic case, A26M stereo bar, 2x A100WS windshield and 2x A57F Microphone Mounts- Also available as a single microphone: Art.176015- A53M Shock-absorbing microphone holder Art:138152- A27M Swivel Microphone Adapter for two microphones Art.210368 |
|
| Behringer : B5 - With exchange capsule (1x cardioid and 1x omnidirectional)- Gold-plated XLR connector- Accessories: clamp, wind shield, case- 48 V Phantom power required |
|
| Shure : Beta 181/C
(6 comments)
- With interchangeable capsules for all types of instrument recording- Lateral recording for unobtrusive positioning- Polar pattern: cardioid- Frequency range: 20 - 20,000 Hz- SPL: 149 dB max. SPL- All capsules available separately on option- Incl. microphone clamp (A57F), windscreen (A181WS) and a ...(+) - With interchangeable capsules for all types of instrument recording- Lateral recording for unobtrusive positioning- Polar pattern: cardioid- Frequency range: 20 - 20,000 Hz- SPL: 149 dB max. SPL- All capsules available separately on option- Incl. microphone clamp (A57F), windscreen (A181WS) and a transport case (A181C) |
|
| Lewitt : LCT 040
(40 comments)- Directional characteristic: Cardioid- Max. SPL: 135 dB- Sensitivity: 18.8 mV / Pa- Dynamic range: 115 dB (A)- Requires +48 V phantom power- Dimensions (Ø x L): 24 x 83 mm- Weight: 44.6 g |
|
| Rode : M3 Bundle
(96 comments)
Rode M3 Condenser Microphone-
Polar pattern: cardioid-
Ideal for recording strings, choir and acoustic guitars-
Frequency range: 40 - 20,000 Hz-
130 dB SPL-
21 dBA Inherent noise-
Output impedance: 200 Ohm-
48V Phantom power or battery power (9 V battery)-
Robust metal housing-
Elastic moun...(+) Rode M3 Condenser Microphone-
Polar pattern: cardioid-
Ideal for recording strings, choir and acoustic guitars-
Frequency range: 40 - 20,000 Hz-
130 dB SPL-
21 dBA Inherent noise-
Output impedance: 200 Ohm-
48V Phantom power or battery power (9 V battery)-
Robust metal housing-
Elastic mounted 1/2" capsule-
Switchable high pass filter-
Switchable preattenuation (-10 dB/ -20 dB)-
Length: 225 mm-
Diameter: 33 mm-
Weight: 360 g-
Incl. wind shield and clamp pro snake TPM 10 Professional microphone cable-
Length: 10 m-
Black Yongsheng XLR plug (made by Neutrik)-
XLR male --> XLR female-
Incl. hook and loop fastener |
|
| DPA : ST4011A
(4 comments)
- Consists of: 2 x DPA 4011 A small diaphragm condenser microphones, MMP-A preamplifier, Peli case, 2 x microphone holders, and 2 foam wind shields- Directional characteristic: cardioid- Frequency response: 20 - 20.000 Hz- Impedance: 200 ohm- Max. SPL (sound pressure level): 152 dB- Requires 48 V ph...(+) - Consists of: 2 x DPA 4011 A small diaphragm condenser microphones, MMP-A preamplifier, Peli case, 2 x microphone holders, and 2 foam wind shields- Directional characteristic: cardioid- Frequency response: 20 - 20.000 Hz- Impedance: 200 ohm- Max. SPL (sound pressure level): 152 dB- Requires 48 V phantom power- XLR connector- Specifically for acoustic guitar and overheads- Enormous degree of sound fidelity |
|
| the t.bone : RB 100
(196 comments)- Characteristics: Figure-8- Frequency range: 30 Hz - 15 kHz- Sensitivity: -54 dB- SPL max. : 148 dB- Impedance: = / |
|
GUITAR & BASS
DRUM & PERCUSSION
PIANO & KEYBOARD
BRASS & WIND
VIOLIN & TRAD.
STUDIO
SOFTWARES
PA
LIGHTING
DJ
VIDEO
EFFECTS
FLIGHTCASES
CABLES
ACCESSORIES
KIDS
GIFT
