KNA Pickups VV-3 Violin/Viola Pickup, passive pickup system for violin and viola, wood-covered piezo pickup (thickness: 1,8 mm), mounting by pushing the pickup into the notches of the bridge, pickup permanently mounted on the elegant ebony output unit (6.3mm jack socket), attached to the frame with chinrest screws, all contact points to the instrument are lined with cork, chrome-plated metal surfaces, weight: 36 g, cable length between pickup and output unit: 10cm, max. impedance: 1500 Ohm.

Designed specially for violins- Directional characteristic: Supercardioid- Frequency response: 20 - 20,000 Hz with 2 dB soft boost at 10 - 12 kHz- SPL (sound pressure level): 142 dB- Gooseneck length: 140 mm (suitable extension element for extensions of up to 220 mm available under Article Nr 294624)- Detachable cable- Cable length: 1.8 m- Cable diameter: 1.6 mm (cable with 2.2 mm diameter available under Article Nr 289926)- Improved microphone installation for even less structure-borne noise- B+K connector- Includes a special mounting system for violins and the DAD 4099 XLR phantom power adapter- Matching case available under Article Nr 489538 (not included)

Consists of the STAT-V violin & viola pickup and the Yellow Single preamplifier- Electrostatic violin pickup- High dynamic range and high linearity- Simple and quick mounting- Greatly reduces feedback sensitivity due to the bridge pickup- The Schertler Yellow Single preamplifier offers a modern design in a lightweight aluminium housing- 2 Input channels for all types of microphones and pickups- 4 Outputs with multiple connection options- Headphone output- Loop for effects with send & return- 4-Band EQ with extra filters for maximum tone control and flexibility- High-end Class A electronics for the best possible sound performance- Made in Switzerland

the t.bone free solo PT 600 MHz Wireless Systems for Guitar and Bass- UHF wireless system with a pocket transmitter- 14 Pre-programmed frequency groups with 15 available channels each- 1 User channel- Adjustable squelch with threshold display on the receiver- Frequency scan in the receiver- Adjustable AF output- Adjustable transmission power: 5 mW, 10 mW, 20 mW- Infrared transfer of the settings from the receiver to the transmitter- Pilot tone- Increments of 25 kHz- Housing: 9.5", 1 U with 2 BNC outputs for antennas- XLR- and jack output- Operates with 12 V, 0.5 DC power supply (positive polarity (+) on the inside)- Transmitter housing: Plastic- 3 TQG male connector- LCD display- Operates with 2 AA batteries or rechargeable batteries (not included)- Frequency band: 596 - 620 MHz- Includes a guitar cable, plastic case and rackmount- Optional antenna converters available under Article Nr 177448 (not included) the t.bone Ovid System CC 100 Condenser lip Microphone for Ovid System- Directional characteristic: Cardioid- Frequency response: 20 - 20,000 Hz- Flexible gooseneck for an easy instrument setup- 3-Pin Mini XLR connector for operation with t.bone wireless systems (also suitable for AKG wireless systems)- Gooseneck length: 130 mm- Cable length: 2 m- Easy to install and can be used with different instrument clips (not included, must be ordered separately)- Includes an XLR phantom power adapter (phantom power required) and a foam windshield the t.bone Ovid System Violin Clip Modular violin microphone holder for the Ovid system- Easy installation without tools- Black rubber end pieces protect the instrument from damage- Adjustable up to approx. 4.5 cm body width- Thumbscrew- Also suitable for mandolin and similar instruments