🔧 Sorting and Filters
In stock only
32 items found(Change geographical area)

Behringer : ECM8000

(1078 comments)
Top Seller
Precise electret condenser measurement microphone- Ultra linear frequency range for high measurement precision- Balanced omnidirectional polar pattern- Operatable with phantom power from +15 V to + 48 V- Rugged construction in slim, modern design- Low inherent noise XLR output with gold- plated cont... (+)

Sonarworks : SoundID Ref Spk and HP w Mic

(163 comments)
Top Seller
Speaker and headphone calibration software and measurement microphone in a bundle- Precise adjustment of the frequency response to get flat and neutral sounding monitor speakers or headphones- Enables a more precise evaluation of recordings and mixes- Room analysis and automated calculation of the r... (+)

Neumann : MA 1

(66 comments)
Top Seller
Calibration system for stereo setups with Neumann KH 80 DSP and all analog (non-DSP-based) Neumann monitors in connection with the KH 750 DSP subwoofer- Calibration algorithms developed jointly with Fraunhofer IIS- Individually calibrated measurement microphone- Space-adaptive target curve- Phase an... (+)

Sonarworks : SoundID Ref Measurement Micro

(89 comments)
Top Seller
Pre-polarised electret condenser capsule- Frequency range: 20 - 20,000 Hz with measurement protocol- Polar pattern: omnidirectional- Sensitivity: 14mV / Pa- Inherent noise: 24 dB- Signal-to-noise ratio: 70 dB- Dynamic range: 106dB- Max. sound pressure level: 132 dB- Requires 48 V phantom power- Conn... (+)

beyerdynamic : MM 1 (2023)

(110 comments)
Top Seller
beyerdynamic MM 1 (2023) - condenser measuring microphone for calibrating sound systems and measuring sound levels and frequency curves, characteristic: omnidirectional, frequency response: 20 - 20000 Hz (50 - 16000 Hz - 1.5 dB), max. SPL: 122 dB, 15 mV/Pa, 12-48V phantom power, current consumption... (+)
Also suitable for recordings and room sound analysis systems- Directivity: Omnidirectional- Frequency range: 20 - 20,000 Hz- 3-Pin male XLR connector- Phantom power- Noise ratio: 70 dB- Equivalent noise level: 22 dB- Peak SPL: 132 dB- Diameter: 21 mm- Weight: 0.15 kg- Colour: Black- Clip and windscr... (+)

DBX : DriveRack RTA-M

(172 comments)
For Driverack and other measuring applications- Ball, electret capsule- Frequency range: 20 - 20,000 Hz- Impedance: 250 Ohm- Sensitivity: -63 dB + 3 dB (0 dB = 1V / microbar 1,000 Hz)- 9-52 V phantom power required- Incl. microphone mount and case

Earthworks Audio : M30

(8 comments)
Omnidirectional pattern- Frequency range: 5Hz - 30 kHz- +-1/-3 dB- Max. SPL: 142 dB- 48V Phantom power required
Audio and Acoustic Analyser For noise monitoring and checking audio devices Includes M4262 measurement microphone class 2 WAV recording for documentation of measured values and recording of comments on mini SD card (2 GB) Real-time clock for documentation of all measured values Built-in loudspeaker ... (+)

Earthworks Audio : M23R

(7 comments)
Directional characteristic: Omnidirectional- Frequency range: 3 Hz - 23 kHz (+/- 0.5 dB)- Sensitivity: 36 mV/Pa (-28.9 dBV/Pa)- SPL (sound pressure level): 140 dB- Equivalent noise level: 20 dB SPL (A weighted)- Requires 24 - 48 V phantom power, 10 mA- Connection: XLR- Dimensions (length x diameter)... (+)
Frequency response correction for studio monitors and headphones for the most linear reproduction possible- Enables better assessment of recordings and mixes- Room analysis and automatic room size calculation using numerous measuring points- Audio Calibration Engine for the most accurate adjustment ... (+)

Earthworks Audio : M23

(9 comments)
Directional characteristic: omnidirectional- Frequency range: 3 Hz to 23 kHz + -1/-3 dB- Sensitivity: 30 mV/Pa- Amplifier type: Discrete Class-A- Max. SPL (sound pressure level): 140 dB- Requires 48 V phantom power- Dimensions: 165 x 22 mm- Weight: 160g- Includes a microphone clamp and adapter from ... (+)

Audix : TM-1 Plus

(15 comments)
Pre-polarised 6mm condenser capsule- Omnidirectional- Transmission 20 Hz - 25 kHz (+/- 2 dB)- Max SPL 140 dB- For 18-52 V phantom power- Output impedance 200 Ohm- Dynamic range 112 dB- Suitable for real time analyser, measurements, tests, room analysis software programs, ambient/room recording- Hous... (+)
Pre-polarised 6mm condenser capsule- Omnidirectional- Transmission: 20 Hz - 25 kHz (+/- 2 dB)- Max. SPL 140 dB- For 18-52 V phantom power- Output impedance: 200 Ohm- Dynamic range: 112 dB- Suitable for real time analyser, measurements, tests, room analysis software programs, ambient/room recording- ... (+)

the t.bone : MM-1

(154 comments)
Omnidirectional measurement microphone- Polarised 1/4" condenser capsule.- Polar pattern: omnidirectional- Frequency range: 20 - 20,000 Hz- Output impedance: 240 Ohm- Max. SPL: 132 dB- SNR: >74.9 dB- Phantom voltage: +9 V to +52 V- Weight: 188 g- Incl. bracket
Measuring microphone For calibrating sound systems and measuring sound levels and frequency curves Polar pattern: Omnidirectional Frequency range: 20 - 20,000 Hz max. SPL: 125 dB Sensitivity: -36 dBV / Pa (0 dB=1V) Impedance: 200 Ohm 12-48 V phantom power Dimensions (D x H): 19 x 168 mm Weight: 100 ... (+)
Measuring microphone for XL2 systems Class 2 Frequency range: 20 - 20,000 Hz Polar pattern: Omnidirectional Maximum sound pressure level: 146 dB Inherent noise: 32dBA Sensitivity: 16 mV/Pa Impedance: 100 Ohm ASD function enables the calibration data of the microphone to be read out on the XL2 48 V D... (+)

Presonus : PRM1

(53 comments)
With 1/4" ball capsule- Designed to use with Virtual StudioLive (VSL) or Smaart Analyzer Technology included- Frequency range: 20 Hz to 20 kHz- Sensitivity: -37 dB / PA- SPL: 132 dB- Incl. Microphone clamp, foam windscreen and hard case

NTI Audio : M2211

(1 comments)
Class 2- Class 1 frequency response- Frequency range: 5 - 20,000 Hz- Omnidirectional- Max. SPL 144 dB- Impedance 100 Ohm, balanced- 48 VDC phantom power- Removable capsule- Metal diaphragm- Length: 150 mm- Diameter: 20.5 mm

Superlux : ECM 888 B

(32 comments)
Frequency range: 20 - 20,000 Hz- Sensitivity at 1,000 Hz: 43dBV / Pa (7.1mV / Pa) ± 3dB- Impedance: 800 Ohm- 94 dB SPL- 128 dB max- Equivalent SPL: 22dB- Signal to noise ratio: 72 dB- Operates with 4LR44 6V batteries- Weight: 150 g- Dimensions: 210 x 170 mm- Nickel housing- Incl. battery and shock ... (+)