Polar pattern: Cardioid- Frequency range: 50 - 20,000 Hz- Sensitivity -59.0 dB (1.12 mV)- Bass roll-off switch- Mid-boost switch- Impedance: 150 ohms- Shielding against electromagnetic interference- Swivel mount- XLR connector- Dimensions: 190 x 64 x 96 mm- Weight: 766 g- Includes switch cover plate and windscreen- Suitable foam windscreen: Art.263050- Suitable replacement pop-up windscreen: Art.157230

Recording and playback in studio quality- Simple, intuitive operation for every application- Microphone element with 3 capsules incl. One-point stereo- 3 selectable directional characteristics (cardioid, eight, ball additional stereo circuit)- 3.5mm headphone jack and internal headphone amplifier- Latency-free monitoring with USB / Direct Mixing controller- The LC display shows the directional characteristic and the currently set operating level- Comfortable table mounting with threaded insert for optional stand installation- Built-in stand- Converter: 3-capsule capacitor converter (16 mm)- Directivity: cardioid, eight, ball and stereo- Transmission range: 30 - 20,000 Hz (microphone), 20 - 20,000 Hz (headphone output)- Sensitivity: -45 dB (0 dB = 1V / bar @ 1 kHz)- Boundary sound pressure level: 120 dB- Noise level distance: 110 dB- Outputs: 3.5mm stereo jack- Output impedance: 10 ohms- Output power: 30 mW @ 48 ohms- Backlit LC display- Power supply via mini USB port- Included in delivery: integrated microphone stand, microphone stand extension, mini USB cable, manual- Dimensions: 27.4 x 11.4 x 11.4 cm- Weight: 1.8 kg- Incl. Software (Download): MPC Beats

Pressure gradient transducer- Directional characteristic: omnidirectional, cardioid, figure-8- Switchable 10 dB attenuation- Universally applicable: vocal performances, speaker, overhead or wind instruments- Nominal impedance: 200 ohm- Frequency range: 20 Hz - 20,000 Hz- Peak SPL for K < 0,5%3) 117 dB (Cardioid)- 48 V ± 4 V phantom power required- Diameter: 56 mm- Length: 200 mm- Weight: 500 g- Including shock mount EA87 and wooden case- Colour: Nickel

16 mm diaphragm- Cardioid characteristic- Frequency range: 20 - 20000 Hz- Signal-to-noise ratio: 74 dB, 1,000 Hz at 1 Pa- Dynamic range: 124 dB (typical), 1,000 Hz max. SPL- Sensitivity: -37 dB (14.1mV) re1V at 1Pa- Impedance: 100 ohm- Max. SPL: 144 dB (1,000 Hz, 1% THD)- Requires 48 V phantom power- Dimensions: 162 x 52 mm- Weight: 345 g- Incl. mount and pouch

Successor to the C 414B-TLII- Now with 9 switchable polar patterns (cardioid, wide-cardioid, hypercardioid, omnidirectional, figure-8 + 4 intermediate positions)- Frequency range: 20 - 20,000 Hz- Dynamic range: 140 dB(SPL) max- Improved detail above 4kHz- Lock mode to save the settings- Peak-Hold display- Status LEDs- 3-Way switchable bass cut filter (0/40/80/160 Hz)- 3 Preattenuation pads (0/-6/-12/-18 dB)- Microphone capsule: CK12- Transformerless XLR Output (FET)- Incl. elastic mount (H85), pop filter (PF80), windshield (W414X) and aluminium case

Rode NT1-A Complete Vocal Recording Vocal Recording Set the t.bone Micscreen XL Rode NT-1 A large diaphragm microphone.- Deluxe SM6 spider with integrated fabric pop shield- 6 m XLR cable- Dust bag- Matching case: Art.486805 (not included in delivery) Millenium MS 2003 1" Large diaphragm microphone- Polar pattern: Cardioid- Frequency response: 20 - 20,000 Hz- Max. sound pressure level: 137 dB- Output impedance: 100 Ohm- Gold-plated output contacts- Dimensions (H x W x D): 190 x 50 x 50 mm- Weight: 326 g

Cardioid- 25.4 mm capsule gold-plated- Dynamic range: 134 dB-A- Max SPL 0.5% THD: 140 dB- Robust zinc die-cast housing- Gold coater 3-pin. XLR connector- Dimensions: 138 x 52 x 36 mm- Weight: 310 g- Incl. DTP40 Lb leather case, LCT 40 SH microphone spider, LCT 40 PSx magnetic pop filter, LCT40 Ws windscreen

1" Large diaphragm microphone with evaporated-gold dual diaphragm capsule based on the AKG Classic- Frequency range: 20 - 20000 Hz- Sensitivity: 20 mV / Pa- Preattenuation pad: 20 dB- Required phantom power: 12 - 52V- Connection: 3-pin XLR connector- Dimensions: 160 x Ø 55 mm- Weight: 280 g- Includes elastic microphone suspension holder, metal case and well-designed windshield- Suitable microphone mount: Article Nr. 124593 (not included)

Successor to the C 414B-TLII- Now with 9 switchable directional characteristics (cardioid, wide-cardioid, hypercardioid, omnidirectional, figure-8 + 4 intermediate positions)- Frequency range: 20 - 20,000 Hz- Dynamic range: 140 dB(SPL) max- Improved details above 4kHz- Lock mode to save the settings- Peak-Hold display- Status LEDs- 3-Way switchable bass cut filter (0/40/80/160 Hz)- 3 Preattenuation pads (0/-6/-12/-18 dB)- Microphone capsule: CK12- Transformerless XLR Output (FET)- Incl. elastic mounting (H85), windshield (W414X) and aluminium case