| Shure : SM 86 (131 comments)
- Optimized for singing- Studio quality condenser capsule- Matched frequency response for precise reproduction of vocals.- Extremely robust design withstands extreme loads.- Cardioid polar pattern reduces unwanted background noise.- Excellent for use with stage and in-ear monitoring.- Built-in three...(+) - Optimized for singing- Studio quality condenser capsule- Matched frequency response for precise reproduction of vocals.- Extremely robust design withstands extreme loads.- Cardioid polar pattern reduces unwanted background noise.- Excellent for use with stage and in-ear monitoring.- Built-in three-point shock absorber reduces handling noise.- Two-layer windscreen reduces wind and pop noise.- Frequency range: 50 Hz - 18 kHz- Output impedance: 150 O- Open circuit sensitivity: -50 dBV/ Pa (3.15 mV)- Max. SPL (at 1 kHz, 1 kO load, 0.1% THD): 147 dB- Inherent self-noise (equivalent noise level): 23 dB(A)- Power supply: 11 to 52 V- Power consumption: 5.2 mA- Dimensions (L x Ø): 183 x 49 mm- Weight: 278 g |
|
| the t.bone : Ovid System CC 100 (1313 comments)
- Directional characteristic: Cardioid- Frequency response: 20 - 20,000 Hz- Flexible gooseneck for an easy instrument setup- 3-Pin Mini XLR connector for operation with t.bone wireless systems (also suitable for AKG wireless systems)- Gooseneck length: 130 mm- Cable length: 2 m- Easy to install and ...(+) - Directional characteristic: Cardioid- Frequency response: 20 - 20,000 Hz- Flexible gooseneck for an easy instrument setup- 3-Pin Mini XLR connector for operation with t.bone wireless systems (also suitable for AKG wireless systems)- Gooseneck length: 130 mm- Cable length: 2 m- Easy to install and can be used with different instrument clips (not included, must be ordered separately)- Includes an XLR phantom power adapter (phantom power required) and a foam windshield |
|
| Rode : NT1-A Complete Vocal Recording (4204 comments)
- Rode NT-1 A large diaphragm microphone.- Deluxe SM6 spider with integrated fabric pop shield- 6 m XLR cable- Dust bag- Matching case: Art.486805 (not included in delivery)- 1" Large diaphragm microphone- Polar pattern: Cardioid- Frequency response: 20 - 20,000 Hz- Max. sound pressure level: 137 dB...(+) - Rode NT-1 A large diaphragm microphone.- Deluxe SM6 spider with integrated fabric pop shield- 6 m XLR cable- Dust bag- Matching case: Art.486805 (not included in delivery)- 1" Large diaphragm microphone- Polar pattern: Cardioid- Frequency response: 20 - 20,000 Hz- Max. sound pressure level: 137 dB- Output impedance: 100 Ohm- Gold-plated output contacts- Dimensions (H x W x D): 190 x 50 x 50 mm- Weight: 326 g |
|
| the t.bone : MB 78 Beta (506 comments)
- Ideal for vocals and acoustic guitars- Very clean sound- Low cut switch- Polar pattern: Cardioid- Frequency range: 20 - 20,000 Hz- Impedance 200 Ohm- Sensitivity: -48 dB, 4mV / Pa- Maximum sound pressure level: (k = 1%): 136 dB- Audio connector: 3-pin XLR connector- Requires 9-52 V phantom power- ...(+) - Ideal for vocals and acoustic guitars- Very clean sound- Low cut switch- Polar pattern: Cardioid- Frequency range: 20 - 20,000 Hz- Impedance 200 Ohm- Sensitivity: -48 dB, 4mV / Pa- Maximum sound pressure level: (k = 1%): 136 dB- Audio connector: 3-pin XLR connector- Requires 9-52 V phantom power- Without switch- Incl. Mount and storage box for transport- Weight: 240 g, light |
|
| Neumann : KMS 105 BK (292 comments)- Condenser microphone- The Neumann sound for stage- High transparency in speaking and singing- Transformerless circuit- Supercardioid characteristics reduces feedback- Crosstalk performance free of colouration- Weight: 350 g- Length: 180 mm- Colour: Black- Incl. microphone clamp |
|
| Rode : NT5 Matched Pair (970 comments)
- True condenser microphone with gold sputtered 1/2 capsule- Cardiod characteristic- Frequency range: 20 - 20.000 Hz- Output impedance: 100 Ohm- Maximum SPL: 143 dB- Max. output level: +13.9 dBu- Very low noise- Requires 48V phantom power- Dimensions (H x W x D): 118 x 20 x 20 mm- Weight of each mi...(+) - True condenser microphone with gold sputtered 1/2 capsule- Cardiod characteristic- Frequency range: 20 - 20.000 Hz- Output impedance: 100 Ohm- Maximum SPL: 143 dB- Max. output level: +13.9 dBu- Very low noise- Requires 48V phantom power- Dimensions (H x W x D): 118 x 20 x 20 mm- Weight of each mic: 101 g- Finish: Satin nickel- Incl. 2 x foam windscreen WS5- 2 x RM5 stand adapter and ZP1 zip pouch |
|
| Shure : Beta 87A (169 comments)
- Supercardioid polar pattern- Linear transmission range for precise, detailed and true to original song and speech transmission.- Extremely precise supercardioid characteristic over the entire frequency range for the greatest possible feedback resistance with maximum amplification.- Built-in, three...(+) - Supercardioid polar pattern- Linear transmission range for precise, detailed and true to original song and speech transmission.- Extremely precise supercardioid characteristic over the entire frequency range for the greatest possible feedback resistance with maximum amplification.- Built-in, three-layer wind protection minimizes pop and breathing noises.- Operation with phantom power- Freuqnecy range: 50 Hz - 20 kHz- Output impedance: 100 ohms- Idle sensitivity: -54 dBV / Pa (2 mV)- Maximum sound pressure level (at 1 kHz; 1 k + load; 0.25% distortion factor): 140.5 dB SPL- Inherent self-noise (equivalent sound pressure): 23.5 dB (A)- Power supply: 11 to 52 V.- Current consumption: max. 1.2 mA- Dimensions (L x Ø): 192 x 51 mm- Weight: 207 g- Includes microphone clip and storage bag |
|
| AKG : C 516 ML (121 comments)- Polar pattern: Cardioid- Frequency range: 60 - 20.000 Hz- Impedance: 200 - L connector- Operating with AKG bodypack transmitters- Especially for accordion- Length: 20 cm gooseneck- 1.5 m Cable- Colour: black- Incl. windscreen, case, rubber tile, A 400 adapter, screws and adhesive cement |
|
| the t.bone : Ovid System Cello Bundle (6 comments)
the t.bone Ovid System CC 100 Condenser lip Microphone for Ovid System-
Directional characteristic: Cardioid-
Frequency response: 20 - 20,000 Hz-
Flexible gooseneck for an easy instrument setup-
3-Pin Mini XLR connector for operation with t.bone wireless systems (also suitable for AKG wireless ...(+) the t.bone Ovid System CC 100 Condenser lip Microphone for Ovid System-
Directional characteristic: Cardioid-
Frequency response: 20 - 20,000 Hz-
Flexible gooseneck for an easy instrument setup-
3-Pin Mini XLR connector for operation with t.bone wireless systems (also suitable for AKG wireless systems)-
Gooseneck length: 130 mm-
Cable length: 2 m-
Easy to install and can be used with different instrument clips (not included, must be ordered separately)-
Includes an XLR phantom power adapter (phantom power required) and a foam windshield the t.bone Ovid System Cello Clip Modular cello microphone holder for Ovid System-
Easy installation without tools-
Black rubber end caps protect the instrument from damaging-
Set screw-
Width: 59 mm the t.bone Ovid System Case Plastic Case-
With recess for all Ovid system microphone clamps and the CC 100 microphone-
Outer Dimensions: 30 x 23 x 7.5 cm |
|
| Neumann : KM184 mt Stereo Set (251 comments)- 2x Smal condenser microphones KM 184 (with continual serial number)- Cardioid- 2x WNS 100 Windscreen- 2x SG 21 Stand joint- Colour: Matte black |
|
| Rode : M2 (309 comments)
- Supercardioid characteristics- Robust metal housing- Low handling noise- Good feedback rejection- Frequency range: 35 - 20000 Hz- Maximum SPL: 141 dB- Required phantom power (24V - 48V)- Impedance: 50 Ohm- Mute switch- Length: 187 x 47 x 47 mm- Weight: 308 g- Includes a 10 year manufacturer warran...(+) - Supercardioid characteristics- Robust metal housing- Low handling noise- Good feedback rejection- Frequency range: 35 - 20000 Hz- Maximum SPL: 141 dB- Required phantom power (24V - 48V)- Impedance: 50 Ohm- Mute switch- Length: 187 x 47 x 47 mm- Weight: 308 g- Includes a 10 year manufacturer warranty |
|
| Rode : M5 MP (431 comments)- 1/2" capsule- Polar pattern: cardioid- Frequency range: 20 Hz - 20 kHz- Output impedance: 200 Ohm- Max. 140 dB SPL- JFET impedance converter- Requires phantom power of 24/48V- XLR connector- Metal housing- Weight: 80 g |
|
| Neumann : U87 Ai Studio Set ni (96 comments)
- Pressure gradient transducer- Directional characteristic: omnidirectional, cardioid, figure-8- Switchable 10 dB attenuation- Universally applicable: vocal performances, speaker, overhead or wind instruments- Nominal impedance: 200 ohm- Frequency range: 20 Hz - 20,000 Hz- Peak SPL for K < 0,5%3) 11...(+) - Pressure gradient transducer- Directional characteristic: omnidirectional, cardioid, figure-8- Switchable 10 dB attenuation- Universally applicable: vocal performances, speaker, overhead or wind instruments- Nominal impedance: 200 ohm- Frequency range: 20 Hz - 20,000 Hz- Peak SPL for K < 0,5%3) 117 dB (Cardioid)- 48 V ± 4 V phantom power required- Diameter: 56 mm- Length: 200 mm- Weight: 500 g- Including shock mount EA87 and wooden case- Colour: Nickel |
|
| Neumann : KMS 105 (138 comments)
- Acoustical operating principle: Pressure gradient transducer- Polar pattern: super-cardioid- Frequency range: 20 Hz - 20 kHz- Sensitivity @ 1 kHz and 1 kO: 4.5 mV/Pa- Nominal impedance: 50 O- Rated load impedance: 1000 O- Equivalent noise level: CCIR 468-3: 28 dB- Signal to noise ratio CCIR 468-3:...(+) - Acoustical operating principle: Pressure gradient transducer- Polar pattern: super-cardioid- Frequency range: 20 Hz - 20 kHz- Sensitivity @ 1 kHz and 1 kO: 4.5 mV/Pa- Nominal impedance: 50 O- Rated load impedance: 1000 O- Equivalent noise level: CCIR 468-3: 28 dB- Signal to noise ratio CCIR 468-3: 66 dB- Maximum output voltage: +12 dBu- Dynamic range of the amplifier DIN/ IEC 651: 132 dB- Supply voltage: 48 V ± 4 V- Power consumption: 3.5 mA- Connection: XLR 3F- Weight: approx. 300g- Diameter: 48 mm- Length: 180 mm- Nickel plated body- Colour: nickel- Delivery incl. neoprene sleeve and microphone clamp |
|
| Shure : MX418/S (19 comments)
- Characteristics: Super-cardioid- With very slender gooseneck (45cm long)- Integrated amplifier- Changeable Mini Capsule (modular)- Incl. accessories: Windscreen, mounting and vibration absorbers- Frequency range: 50 Hz - 17 kHz- Output impedance: 180 Ohm- Open circuit sensitivity: Super-cardioid: ...(+) - Characteristics: Super-cardioid- With very slender gooseneck (45cm long)- Integrated amplifier- Changeable Mini Capsule (modular)- Incl. accessories: Windscreen, mounting and vibration absorbers- Frequency range: 50 Hz - 17 kHz- Output impedance: 180 Ohm- Open circuit sensitivity: Super-cardioid: -33.5 dBV / Pa (21.1 mV)- Maximum SPL (1 kHz at 1% THD, 1 kOhm load): Super-cardioid: 122.7 dB SPL- Self-noise (equivalent sound pressure level): Super-cardioid: 26.5 dB- CMRR: At least 45.0 dB- Power supply: 11 to 52 V- Power consumption: 2 mA- Temperature range: -18 To + 57 ° C- Relative humidity: 0 to 95% |
|
| Rode : NT5-MP Stand Bundle (141 comments)
Rode NT5 MP Matched Microphone Pair-
True condenser microphone with gold sputtered 1/2 capsule-
Cardiod characteristic-
Frequency range: 20 - 20.000 Hz-
Output impedance: 100 Ohm-
Maximum SPL: 143 dB-
Max. output level: +13.9 dBu-
Very low noise-
Requires 48V phantom power-
Dimensions (H x...(+) Rode NT5 MP Matched Microphone Pair-
True condenser microphone with gold sputtered 1/2 capsule-
Cardiod characteristic-
Frequency range: 20 - 20.000 Hz-
Output impedance: 100 Ohm-
Maximum SPL: 143 dB-
Max. output level: +13.9 dBu-
Very low noise-
Requires 48V phantom power-
Dimensions (H x W x D): 118 x 20 x 20 mm-
Weight of each mic: 101 g-
Finish: Satin nickel-
Incl. 2 x foam windscreen WS5-
2 x RM5 stand adapter and ZP1 zip pouch 2x Roadworx Mic Stand + Cable 10 m Pack Microphone Stand Set-
Consists of microphone stand and microphone cable-
10 m Microphone cable with 3-pin XLR connectors-
High quality flexible cable-
Microphone stand with boom-
Plastic tripod base-
Maximum usable height of the stand including boom: 190 cm-
Adjustable height of centre column 75 - 130 cm-
Length of boom: 65 cm-
Diameter of stand: 64 cm-
Transport length of tripod: 74 cm-
Thread 3/8" with 5/8" adapter-
Weight of stand: 1.46 kg-
Includes clamp for cable routing |
|