Directional characteristic: Cardioid- Frequency response: 20 - 20,000 Hz- Flexible gooseneck for an easy instrument setup- 3-Pin Mini XLR connector for operation with t.bone wireless systems (also suitable for AKG wireless systems)- Gooseneck length: 130 mm- Cable length: 2 m- Easy to install and can be used with different instrument clips (not included, must be ordered separately)- Includes an XLR phantom power adapter (phantom power required) and a foam windshield

Easy installation with different instrument holders (optional - not included)- With phantom power adapter (phantom power required)- Detachable cable with screw contact- Directivity: Cardioid- Frequency range: 20 - 20,000 Hz- Flexible gooseneck for easy alignment on the instrument- 3-Pin mini XLR connector for operating with t.bone wireless systems - also suitable for AKG wireless systems- Length of gooseneck: 130 mm- Cable length: 1.2 m- Optional cables with Sennheiser EW and Shure TQG connector available separately (not included)- Foam windshield included

Polar pattern: Super-cardioid- Frequency range: 20 - 20,000 Hz- With 2 dB soft boost at 10 - 12 kHz- Max. SPL: 142 dB- Gooseneck length: 140 mm (can be extended to 220 mm with Art. 294624 - not included)- Removable cable- Cable length 1.8 m- Cable diameter 1.6 mm (fitting cable with 2.2 mm: Art. 289926 - not included)- Improved microphone suspension for even less structure-borne noise- B + K plug- Includes universal holder and phantom power adapter DAD 6001 XLR- Suitable case: Art.489538 (not included in delivery)

Thomann 70th Anniversary model- Two selected small-diaphragm condenser microphones (stereo set)- Gold-sputtered 1/2" capsule- Cardioid polar pattern- Frequency range: 20 – 20,000 Hz- Maximum SPL: 143 dB- Sensitivity: 12 mV/Pa- Equivalent noise ratio: 16 dBA (A-weighted)- Requires phantom power (24 V / 48 V)- Connection: XLR male (3-pin)- Dimensions (L x D): 118 x 20 mm- Weight per microphone: 101 g- Colour: Black- Includes Rode SB20 stereo bar, 2 x Rode WS5 foam wind shield, 2 x Rode RM5 stand clamp, and Rode ZP1 transport case

Rode NT5 MP Matched Microphone Pair- True condenser microphone with gold sputtered 1/2 capsule- Cardiod characteristic- Frequency range: 20 - 20.000 Hz- Output impedance: 100 Ohm- Maximum SPL: 143 dB- Max. output level: +13.9 dBu- Very low noise- Requires 48V phantom power- Dimensions (H x W x D): 118 x 20 x 20 mm- Weight of each mic: 101 g- Finish: Satin nickel- Incl. 2 x foam windscreen WS5- 2 x RM5 stand adapter and ZP1 zip pouch 2x Roadworx Mic Stand + Cable 10 m Pack Microphone Stand Set- Consists of microphone stand and microphone cable- 10 m Microphone cable with 3-pin XLR connectors- High quality flexible cable- Microphone stand with boom- Plastic tripod base- Maximum usable height of the stand including boom: 190 cm- Adjustable height of centre column 75 - 130 cm- Length of boom: 65 cm- Diameter of stand: 64 cm- Transport length of tripod: 74 cm- Thread 3/8" with 5/8" adapter- Weight of stand: 1.46 kg- Includes clamp for cable routing

Cardioid- Frequency range: 60 - 20,000 Hz- Impedance: 200 Ohm- Max. SPL @ 1% THD: 130 dB- Colour: black- Detachable 3.0 m phantom power adaptor cable to XLR (MPA V L)- Gooseneck with clamp- Dimensions (microphone): length: 213 mm, max. width: 47 mm- Incl. W44 wind shield, H 518 angled holder, 3.0 m connector cable and bag

Easy installation with different instrument holders (optional - not included)- With phantom power adapter (phantom power required)- Removable cable with screw contact- Directivity: Cardioid- Frequency range: 20 - 20,000 Hz- Flexible goose neck for easy alignment on the instrument- Cable with Sennheiser EW connector for Sennheiser EW wireless systems- Length of gooseneck: 130 mm- Cable length: 1.2 m- Optional cable with Shure TQG plug and 3-pin TQG plug for the t.bone and AKG systems sold separately (not included)- Includes foam windscreen