Gauge for checking the flatness of the frets- 5 Precisely machined edges- Edge lengths: 10 cm, 7.5 cm, 5 cm, 3.5 cm and 2.5 cm- Suitable for instruments from Long-Scale E-Bass to Soprano Ukulele- Made of stainless steel- Additional measuring scales in millimetres and inches on the opposite sides- Can also be used to check and adjust string height, neck curvature, string spacing, pickup height and bridge height- Dimensions: 100 x 50 x 0,8 mm- Weight: 30 g

Easy to attach between the strings in the sound hole- Keeps valuable instruments at the right humidity level- Protects instruments from protruding fret ends, cracks and other damages caused by dryness- Easy to use, clean and low maintenance- Long-lasting effect- Innovative, reusable Humid-i-Bar sponge holds 10 times its weight in water- The anti-drip design does not leak regardless of orientation- Easy control by touching the sponge insert- For use with distilled water

Especially for acoustic guitars and steel-string guitars- Prevents cracking in the body and warped neck- Easy to remove- The humidifier is simply inserted into the sound hole of the guitar without additional holders or clips- Releases moisture to the instrument slowly and evenly- To refill, lid must be opened with 2 hooks (press down below the cover and the cover is already removed - quite simply)

Provides everything to optimally adjust a guitar- Professional quality- With simple setup guide in English- 2-in-1 screwdriver with 2 attachments: #1 Phillips, #2 Phillips, 6.35 mm (1/4 inch) slot, 3 mm slot- 11x Allen key: 1.5 mm, 2.5 mm, 3 mm, 4 mm ball end, 5 mm ball end, 1.27 mm (0.050 inch), 1.59 mm (1/16 inch), 1.98 mm (5/64 inch), 2.32 inch (3.32 mm), 3.18 inch (1.18 inch), 4.76 mm (3/16 inch) ball end- Feeler gauge with 15 blades- 152.4 mm (6 inch) steel ruler- 158.8 mm (6.25 inch) side cutter- Capo- String winder- Easy set-up guide- Polyester bag with clear vinyl cover and compartments for picks, instructions and strings