| Analog Cases : Pulse Case Volt 476
(1 comments)- Suitable for Universal Audio Volt 476- Perfect fit- Material: EVA outside- Soft velvet lining- High-quality all-round zipper- Sturdy strap- Outside dimensions: 265 x 132 x 68 mm- Weight: 0.3 kg |
|
| KandM : 8000-437 VESA for Genelec
(7 comments)- For the Genelec 8000/6000 series- Black- 75/100 mm |
|
| RTM : SM911 1/4" 762m NAB
(8 comments)- Tape width: 1/4"- Length: 762 m- Hub- Storage: Eco Pack |
|
| Thomann : Cover AKAI Prof. MPD 226 - Suitable for AKAI Professional MPD 226- Made of water-repellent high-quality nylon- Colour: Black- Made in Germany |
|
| Millenium : Laptopstand - Ideal for all DJs who use Rane Serato, Traktor Scratch, or other DJ programs- Dimensions of the shelf (L x W x H): 26.5 x 22.5 x 17-34 cm |
|
| Gator : GR-4S
(283 comments)- 4U- 19" rack rails in front and rear- Rackable depth: 375 mm- Heavy duty butterfly latches- Very light construction- Exterior dimensions: 445 x 546 x 241 mm- Interior dimensions: 311 x 483 x 178 mm- Suitable spare screws available under Article Nr: 449210 |
|
| Millenium : IR-2022
(39 comments)- Usable height: 22 U- With lockable door in front and back- Solid steel construction- Weight: 51 kg- Dimensions (W x D x H): 600 x 600 x 1139 mm- Colour: Black- Suitable cage nuts: Article Nr 263174 (not included) |
|
| Rode : Backpack
- Rode Backpack; fits e.g.: RODECaster Pro II, RODECaster Pro, laptop (max 16") and two microphone arms (PSA, PSA 1 ); material: polyester; Alcantara handle; large main compartment with two sections plus inner pocket; robust two-way zippers; volume: 18 liters; weight: 1.25kg; dimensions: 360 x 190 x...(+) - Rode Backpack; fits e.g.: RODECaster Pro II, RODECaster Pro, laptop (max 16") and two microphone arms (PSA, PSA 1 ); material: polyester; Alcantara handle; large main compartment with two sections plus inner pocket; robust two-way zippers; volume: 18 liters; weight: 1.25kg; dimensions: 360 x 190 x 520 mm |
|
| Rode : MicDrop
(3 comments)- Suitable for Lavalier, Lavalier GO, SmartLav+ and RODELink LAV- Used to weigh down the microphone cable- Allows a sorted relocation e.g. under the clothes- Material: brass- Finish: satin nickel-plated- Dimensions: 35 x 14.8 x 15 mm- Weight: 32 g |
|
| Gator Frameworks : Elite Series Sidecar grey
(1 comments)
- Configurable rack units - 4, 8, 12 U- Rack depth: 22"- Height-adjustable shelf and cable aperture at the rear- Metal feet with built-in levelling feet at the bottom for uneven floor surfaces- Storage space in cabinet with soft-close door- Dimensions (W x H x D): 762 x 762 x 610 mm- Weight: 41 kg- ...(+) - Configurable rack units - 4, 8, 12 U- Rack depth: 22"- Height-adjustable shelf and cable aperture at the rear- Metal feet with built-in levelling feet at the bottom for uneven floor surfaces- Storage space in cabinet with soft-close door- Dimensions (W x H x D): 762 x 762 x 610 mm- Weight: 41 kg- Colour: Grey |
|
| MOTU : Rack Mounting Kit 1HE
(4 comments)- For MOTU interfaces that are 1 U high and 19" wide or to connect two 9.5" / 1 U MOTU interfaces into one unit- Consists of: 1x rack ear left 1 U, 1x rack ear right 1 U, and 1x connection piece for 2x 9.5" devices- Colour: Black |
|
| Magma : CTRL Case Rodecaster pro
(8 comments)- 6 mm EVA Durashock hard foam- Water-repellent 600D polyester outer material- Robust zipper- @Convoluted foam in the lid- Carrying straps- Compatible with Decksaver covers- External dimensions: 520 x 300 x 120 mm- Internal dimensions: 505 x 270 x 110 mm- Weight: 1.3 kg- Colour: Black |
|
| Thon : Rack Case 10U 12 RA
(196 comments)
- 10 RU- Installation depth from rack rail: 12 cm- Ideal for installing 19" mixers, etc.- Made of 7 mm plywood- 22 / 22 mm Aluminium edges- Small ball corners- Rubber feet- 2 Drawbolts- 1 Handle- Liftable continuously adjustable rack rail- Attachment material- Detachable lid- Made in Germany- Exteri...(+) - 10 RU- Installation depth from rack rail: 12 cm- Ideal for installing 19" mixers, etc.- Made of 7 mm plywood- 22 / 22 mm Aluminium edges- Small ball corners- Rubber feet- 2 Drawbolts- 1 Handle- Liftable continuously adjustable rack rail- Attachment material- Detachable lid- Made in Germany- Exterior dimensions: 55 x 19.5 x 48.5 cm- Weight: 6.7 kg- Mixer, etc. not included!- Colour: Phenol brown- Set-up angle up to 24°- Made in Germany |
|
| Thomann : Sampler Case TH22
(9 comments)
- The case is suitable for Native Instruments Maschine Mikro MK3- 2 Metal latches- 2 Lockable snap locks including the key- Interior construction is made with EVA- Foam on the top cover- Case handle- Internal dimensions (W x D x H): 360 x 240 x 70 mm- External dimensions (W x D x H): 371 x 251 x 82 ...(+) - The case is suitable for Native Instruments Maschine Mikro MK3- 2 Metal latches- 2 Lockable snap locks including the key- Interior construction is made with EVA- Foam on the top cover- Case handle- Internal dimensions (W x D x H): 360 x 240 x 70 mm- External dimensions (W x D x H): 371 x 251 x 82 mm- Weight: 1.25 kg- Colour: Black |
|
| Thon : Studio Desktop 2U beech
(4 comments)- 2U usable height- Up to 315 mm installation depth- Continuous rack rail- 4 Felt pads- Material: 19 mm coated furniture decor panel- External dimensions (W x D x H): Approx. 540 x 320 x 144 mm- Weight: Approx. 5.3 kg- Colour: Beech- Incl. Screw set- Made in Germany |
|
| Thon : Studio Side Rack 10U WH
- Thon Studio Side Rack 10U WH; kit for self-assembly; material: 19mm melamine-Coated furniture board; usable height: 10U; installation depth: min. 27,6cm; continuous 10U rack rails incl. rack screw set; 45 degree angle; lockable casters; made in Germany; including screw set for assembly and assembl...(+) - Thon Studio Side Rack 10U WH; kit for self-assembly; material: 19mm melamine-Coated furniture board; usable height: 10U; installation depth: min. 27,6cm; continuous 10U rack rails incl. rack screw set; 45 degree angle; lockable casters; made in Germany; including screw set for assembly and assembly instructions; external dimensions (W x D x H): 540 x 570 x 632mm; weight: 12,6kg; color: white |
|
| Thomann : Case TH18 Moog DFAM
- Case suitable for Moog DFAM- 2 Snap lock- 2 Metal hinges- 1 Plastic carrying handle- Aluminium edges- Interior with EVA- Foam available on the top cover- Space for accessories available inside- Dimensions (W x D x H): 298 x 50 x 90 mm- Outer dimensions (W x D x H): 370 x 210 x 140 mm- Weight: 1.65...(+) - Case suitable for Moog DFAM- 2 Snap lock- 2 Metal hinges- 1 Plastic carrying handle- Aluminium edges- Interior with EVA- Foam available on the top cover- Space for accessories available inside- Dimensions (W x D x H): 298 x 50 x 90 mm- Outer dimensions (W x D x H): 370 x 210 x 140 mm- Weight: 1.65 kg- Colour: Black |
|
| ATR Magnetics : Splicing Tape 1''
(1 comments)- Length: 25 m- Width: 1 mm- Colour: Blue |
|
| Flyht Pro : Rack 20U Slide Shock Mount
(2 comments)
- Double-door with hinged and retractable case lids- 20 U Effective height- Usable depth: 520 mm- Rack rails spring-mounted in the case at the front and rear- Material: 9 mm Multiplex plywood black coated- Stable 35 x 35 mm aluminum profiles- 8 Ball corners- 4 Large folding handles- 4 Spring-loaded ...(+) - Double-door with hinged and retractable case lids- 20 U Effective height- Usable depth: 520 mm- Rack rails spring-mounted in the case at the front and rear- Material: 9 mm Multiplex plywood black coated- Stable 35 x 35 mm aluminum profiles- 8 Ball corners- 4 Large folding handles- 4 Spring-loaded butterfly closures- 4 Wheels, 2 of them braked- External dimensions: 640 x 608 x 1030 mm- Weight: 56.5 kg- Includes screw set |
|
| Thon : Studio L-Rack 17U Media Grey
(18 comments)
- 17 U Usable height front- 11 U Usable height at rear- 11 U Usable depth top- 54 cm Installation depth- Material: 19 mm melamine-coated furniture board- With plinth- 4x 80 mm castors under the plinth- Lockable roller shutter in aluminium design at the front- Large lockable service door at the rear-...(+) - 17 U Usable height front- 11 U Usable height at rear- 11 U Usable depth top- 54 cm Installation depth- Material: 19 mm melamine-coated furniture board- With plinth- 4x 80 mm castors under the plinth- Lockable roller shutter in aluminium design at the front- Large lockable service door at the rear- 80 mm cable entry on both sides- Dimensions (W x D x H): 54 x 66 x 112 cm- Colour: Graphite- Includes set of screws- Made in Germany |
|
GUITAR & BASS
DRUM & PERCUSSION
PIANO & KEYBOARD
BRASS & WIND
VIOLIN & TRAD.
STUDIO
SOFTWARES
PA
LIGHTING
DJ
MICROPHONES
VIDEO
EFFECTS
FLIGHTCASES
CABLES
ACCESSORIES
KIDS
GIFT
