| Neutrik : Rean NYS SPCR 1
(39 comments)Insert Module- For Neutrik NYS-SPP-L1 - With stereo jack / 2x mono jack - For using in place of standard patch modules - From Neutrik (Rean) |
|
| Millenium : DI-E
(1789 comments)Passive DI Box- In metal housing - Max. input level +10/ +50 dBu - Ground/ lift switch - With integrated switchable resistor network for extremely high input level (e.g. guitar box) - XLR output - Dimensions (W x D x H): 100 x 130 x 40 mm |
|
| Fredenstein : Blank Panel Black
(13 comments)Fredenstein Blank Panel Black Single slot for 500 Series Module Frames |
|
| TE Connectivity Divested : Cat.6 Kuppl. Keystone
(0 comments)Cat.6 coupler, keystone, modular ethernet couplereckverbinder 8pin, MJ/MJ CAT 6, Part-Nr. 2111124-1, also compatible with AMP/Tyco RJ45 Patchbay, (Nr. 0-0336526-1) |
|
| Fredenstein : Blank Panel Gold Blank Panel- Colour: Gold - For 500 module frames |
|
| Harley Benton : GroundBox
(6 comments)
Harley Benton GroundBox; provide ground connection to guitar setups; helps to avoid inteference noise in any guitar setup without ground connection, like for example battery powered amps, compact power amplifiers or multieffects powered by socket power supply; 2 jack connectors for signal in and out...(+) Harley Benton GroundBox; provide ground connection to guitar setups; helps to avoid inteference noise in any guitar setup without ground connection, like for example battery powered amps, compact power amplifiers or multieffects powered by socket power supply; 2 jack connectors for signal in and out; removable ground cable with banana connector; for use only with guitar or line signals, never connect with power amp outputs or in any speaker connections; it is not recommended to use the ground box in systems with already provided ground connection; dimensions: 93mm x 54mm x 35mm; weight: 175g |
|
| Behringer : Ultra-DI DI400P
Passive Di-Balanced Box- Direct connection of instruments to amplifiers and mixers - Allows long cable paths without loss of sound in the high frequency range - Jack input - Parallel output - Balanced XLR output ground lift switch solves typical problems with ground loops - Road-suitable metal housi...(+) Passive Di-Balanced Box- Direct connection of instruments to amplifiers and mixers - Allows long cable paths without loss of sound in the high frequency range - Jack input - Parallel output - Balanced XLR output ground lift switch solves typical problems with ground loops - Road-suitable metal housing |
|
| Heritage Audio : HABPNL Blank Panel- For a 500 slot of a module frame - Material: Metal - Colour: RAF-Blue-Grey - Dimensions (W x H): 3.81 x 13.5 cm |
|
| Presonus : AR12-Rack Ear Presonus AR12 rack ear; rack kit for StudioLive AR12 / AR12c mixers; |
|
| API Audio : Blank Panel 500er 5B1
(26 comments)Blank panel- For 500 10slot, 6slot API Lunchbox and 1608 |
|
| Millenium : Phantom Blocker
(5 comments)Adapter for blocking phantom power- XLR 3-pin male to XLR 3-pin female - Phantom power is blocked - audio signal remains intact - Works in both directions - Protects microphone preamps, microphones and device outputs from phantom power |
|
| Monacor : MA-100/15
(29 comments)Broadband Transformers- Balanced signals are adapted to jack without interference - With Hi/Lo switch - Balanced XLR connector as well as 6.3 mm unbalanced jack - Length of the microphone cable: 15 cm - Frequency range: 50 - 15,000 Hz - Impedance: 600 Ohm |
|
| Behringer : DI20
(811 comments)
Active 2-Channel DI boxActive 2-Channel DI-Box / Splitter, with whose help signals with high impedance - e.g. from guitars and basses - can be connected directly to a mixer or recording system.- Jack input - XLR Out - -20 / 40dB PAD (up to 3000 W) - Operable via battery (9V) or phantom (15-52V) - W...(+) Active 2-Channel DI boxActive 2-Channel DI-Box / Splitter, with whose help signals with high impedance - e.g. from guitars and basses - can be connected directly to a mixer or recording system.- Jack input - XLR Out - -20 / 40dB PAD (up to 3000 W) - Operable via battery (9V) or phantom (15-52V) - With the ground switch ground loop can be eliminated - Battery-off switchable - Additional Split mode (channel 1 assigns signal to both XLR outputs) - In link mode Channel 2 outputs the signal from channel 1 balanced - Robust housing |
|
| Behringer : HD400
2-Channel Hum SuppressorDo not be fooled by the compact dimensions of this 2-channel hum suppressor because as a powerful problem solver, it should be in every rack! This handy device removes hum and noise quickly and reliably. The HD400 breaks ground loops and therefore automatically converts unbal...(+) 2-Channel Hum SuppressorDo not be fooled by the compact dimensions of this 2-channel hum suppressor because as a powerful problem solver, it should be in every rack! This handy device removes hum and noise quickly and reliably. The HD400 breaks ground loops and therefore automatically converts unbalanced to balanced signals. The device has two 6.3mm stereo jack inputs and outputs for two mono or a single stereo signal.- Simple, fast and reliable removal of hum and noise - Safe and effective interruption of ground loops - Automatic conversion of unbalanced to balanced signals - Inputs: 2 TRS jacks 6.3mm - Outputs: 2 jack sockets 6,3 mm (2x mono or 1x stereo) - Dimensions: 32 x 57.2 x 103.6 mm - Weight: 180 g |
|
| Behringer : Ultra-DI DI600P
(73 comments)
Direct Input BoxIt often happens that you want to connect certain sound sources straight to other audio gear, be it for a live performance or a studio session. The direct connection between audio equipment can quickly turn out to be a real challenge: technical problems crop up that can affect the si...(+) Direct Input BoxIt often happens that you want to connect certain sound sources straight to other audio gear, be it for a live performance or a studio session. The direct connection between audio equipment can quickly turn out to be a real challenge: technical problems crop up that can affect the signal.- Jack input - Parallel output - Output impedance balanced - Impedance and signal matching for the direct connection of instruments to amplifiers and mixers - Filter switch reduces annoying hiss and buzz - Ground lift switch eliminates typical ground loop problems - Instruments or amplifier outputs with up to 3,000 watts can be connected directly - It converts any unbalanced signal to a balanced signal and eliminates unwanted noise - Compact, road-suitable metal casing |
|
| Millenium : DI-P Passive DI-Box
(139 comments)Passive Direct Box- Jack in - Jack thru - XLR out - Switchable 30 dB pad - Switchable gnd lift - Robust metal chassis - Colour: black |
|
| IMG Stageline : MPS-1
(3 comments)IMG Stageline MPS-1; Microphone splitter; Galvanically isolated output with ground lift switch and feed-through output; XLR connections (600 O) for input and output; Frequency range: 35-30,000 Hz; Dimensions: 100 x 80 x 40 mm; Weight: 310 g |
|
| Millenium : DI-33 Active DI Box (Battery/Phantom)- XLR/KLI in - KLI link pad -20 dB - XLR out - Ground lift - PAD - Galvanic isolation - Sturdy metal housing with corner protectors - Frequency range: 10 - 40,000Hz - Battery with 1x 9 Volt |
|
| tc electronic : Teleport GLT
(3 comments)Active Guitar Signal Transmitter- For long cables of up to 100 m - Drag control - Matches the length of the guitar cable - Guitar input - XLR output - 12 V, 150 mA Power supply connection (power supply unit not included) - Dimensions (H x W x D): 64 x 118 x 112 mm - Weight: 0.5 kg |
|
| IMG Stageline : DIB-100
(0 comments)
IMG Stageline DIB-100; DI-Box; signal transmission from musical instruments to a mixer or amp; By using a transformer coupling, interferences due to matching problems, e.g. hum loops, are prevented to a large extent; Input and output are galvanically isolated; 3-fold attenuation switch (0/-20/-40 d...(+) IMG Stageline DIB-100; DI-Box; signal transmission from musical instruments to a mixer or amp; By using a transformer coupling, interferences due to matching problems, e.g. hum loops, are prevented to a large extent; Input and output are galvanically isolated; 3-fold attenuation switch (0/-20/-40 dB); Ground lift switch; Instrument feed-through output; Wideband balancing transformer; Robust metal housing; Frequency range 15-30,000 Hz; Input impedance 50 kOhm; Output impedance 600 Ohm (bal.), 50 kOhm (unbal.); Gain 0/-20/-40 dB; Transmission ratio 10:1; Dimensions (WxHxD) 74 x 45 x 130 mm; Weight 0,56kg |
|
My account (login)
GUITAR & BASS
DRUM & PERCUSSION
PIANO & KEYBOARD
BRASS & WIND
VIOLIN & TRAD.
STUDIO
SOFTWARES
PA
LIGHTING
DJ
MICROPHONES
EFFECTS
FLIGHTCASES
CABLES
ACCESSORIES
KIDS
