Full Analogue Reactive Load Box / Attenuator / Power Amplifier Reactive load box with attenuator, Celestion Approved Load Response, and sterep/dual mono 215 W power amplifier Attenuator rated up to 200 W RMS Selectable multi-impedance compatibility: 4, 8, 16 ohm Two channels Continuous active attenuation from complete silence to full volume Stereo / dual mono power amplifier: 215 W Footswitchable stereo FX loop Includes GENOME Reload II Cab Sim Plug In with 24 DynIR Virtual Cabinets Amp In Level control Controls for channels A and B: Cab, Output, Depth, Presence FX loops A and B: Dry/Wet Push buttons for channels A and B: Mojo Switch for channels A and B: Mojo Loop level: -10 / 4 dB FX Loop Off / On Footswitch Amp impedance Source for channels A and B: Line/Amp LED: Solo On Impedance: 4, 8 or 16 ohm Dimensions (W x D x H): 365 x 240 x 89 mm Weight: 6.9 kg Connections: FX loop A and B send: 2 x 6.3 mm jack FX loop A and B return: 2 x 6.3 mm jack Footswitch: 6.3 mm stereo jack Line out A and B: 2 x XLR Cab out A and B: 2 x 6.3 mm jack Amp in: 6.3 mm jack

All-in-one solution- For the perfect reduction of guitar and bass sounds, both on stage and in the studio- Reactive load resistance- -20 dB power reducer- Analogue speaker simulation- DI box- 4 ohm version- Maximum amplifier power: 100 watts RMS- Fan cooled- Solid metal case- Compact size- Perfect for pedalboards- Front: Output Level, Ground Lift, Instrument and Phase, Line Output, Balanced DI Output and Power Adapters (9 - 24V DC / 5mA - Power Supply not included)- Rear: sockets for Speaker Thru, Speaker Attenuator and Amplifier Input- Dimensions: 175 x 126 x 62 mm- Weight: 1 kg- Includes Wall of Sound III (WoS III) plug-in with 16 free Virtual Cabinets (after registering the product)

Tube Preamp For Electric Guitar- 3 Channels- Fully analogue preamp and guitar amp simulator- Inspired by the sound of three legendary UK and US amplifiers- 12AX7 preamp tube operating at high voltage provides warmth and bite- Integrated OD boost- Analogue cab sim for live DI and recording- FX Loop and MIDI In/Out for effortless integration into existing setups- Includes GENOME with 5 DynIR captures, 40 microphones, 12 pedals, 12 TSM amps, 17 STUDIO FX, 40 AI amp captures and an expert-selected RIG library- Controls: DI Out volume - clean: gain, volume, bass, treble - crunch: gain, volume - lead: gain, volume - crunch and lead: boost, bass, middle, treble- Effect loop-in: Serial- Input: 6.3 mm jack- Output: 6.3 mm jack- FX Send and return: 2x 6.3 mm jack- DI Out: XLR- Aux In: 3.5 mm stereo jack- MIDI In & Out- Mains adapter connection: Barrel connector 5.5 x 2.1 mm, centre negative- Power consumption: 500 mA- Power supply with 12 V DC mains adapter (included)- Dimensions (W x D x H): 192 x 117 x 72 mm- Weight: 0.75 kg

Load Box- Compact reactive load box (16 ohms, max. 100 watts RMS) with built-in attenuator: Home (-38 dB), Club (-20 dB), Stadium (0 dB)- DynIR technology for DSP-powered true stereo dual microphone virtual speakers- 2-channel stereo static IR loader with 512 memory slots for user-defined IR files- Global Virtual Load Shaper for custom sound shaping- 32 DynIR Premium virtual boxes are pre-installed- 128 presets- USB C / MIDI / Wireless Torpedo Remote connectivity for easy control of all editable parameters- XLR DI outputs with 3 routing options: stereo, dual mono, dry/wet- Silent playing with headphones- Stereo Post FX Suite including reverb, semi-parametric EQs, Twin Tracker Virtual Guitarist, enhancer and noise gate- Space and voicing controls- Access and preview over 900 premium virtual boxes via the Torpedo Remote online library- Includes Genome Studio Grade Box Simulation and more- Headphone connection: 6.3 mm stereo jack- Speaker input: 6.3 mm jack- Speaker output: 6.3 mm jack- Left and right output: XLR- MIDI input: 3.5 mm stereo jack- USB C connection- Power supply connection: Barrel connector 5.5 × 2.1 mm, centre negative- Operation with a 2000 mA 12V DC power supply- Dimensions (W x D x H): 128 × 175 × 64 mm- Weight: 1.3 kg- Includes power supply

Load Box- Compact reactive load box (8 ohms, max. 100 watts RMS) with built-in attenuator: Home (-38 dB), Club (-20 dB), Stadium (0 dB)- DynIR technology for DSP-powered true stereo dual microphone virtual speakers- 2-channel stereo static IR loader with 512 memory slots for user-defined IR files- Global Virtual Load Shaper for custom sound shaping- 32 DynIR Premium virtual boxes are pre-installed- 128 presets- USB C / MIDI / Wireless Torpedo Remote connectivity for easy control of all editable parameters- XLR DI outputs with 3 routing options: stereo, dual mono, dry/wet- Silent playing with headphones- Stereo Post FX Suite including reverb, semi-parametric EQs, Twin Tracker Virtual Guitarist, enhancer and noise gate- Space and voicing controls- Access and preview over 900 premium virtual boxes via the Torpedo Remote online library- Includes Genome Studio Grade Box Simulation and more- Headphone jack: 6.3 mm stereo jack- Speaker input: 6.3 mm jack- Speaker output: 6.3 mm jack- Left and right output: XLR- MIDI input: 3.5 mm stereo jack- USB C connection- Power supply connection: Barrel connector 5.5 × 2.1 mm, centre negative- Operation with a 2000 mA 12V DC power supply- Dimensions (W x D x H): 128 × 175 × 64 mm- Weight: 1.3 kg- Includes power supply unit

The compact loadbox and amp DI. The Torpedo Captor is an easy to use reactive Loadbox, perfect for unleashing your favourite tube amp in a variety of modern applications and venues. Designed to be placed between your amp head and speaker cabinet, it acts as a power attenuator and cabinet simulator, and is packed in a DI sized enclosure. Featuring a complete set of connections as well as the Two notes Wall Of Sound plug-in software, which gives you 16 virtual cabinets to choose from, the Torpedo Captor allows you to easily use your amp at full potential at home, in the studio, or live. - Save space, weight and volume on stage - Easy and fast recording - Use your favourite loud amp at reasonable volume or silently. - Choose between 16 famous virtual cabinets with the Wall Of Sound III plug-in - Available in 4, 8, or 16 Ohms models - Use your amp and play securely The Torpedo Captor allows to capture a rich sound for direct recording without having to mike your speaker. Used without a speaker, it allows to use your amp head in silent mode without any risk. If you wish to keep using a cabinet, the Torpedo Captor features a direct speaker THRU or ATT output which sends either the full volume of the amp to the cabinet or a fixed -20dB attenuation. It also offers a balanced XLR active DI output with selectable guitar or bass simulation taken from the Le Preamp series of preamps, as well as a balanced line output with adjustable output level and polarity switch. It has an admissible power of 100 Watts RMS and is available in 3 models of 4, 8, and 16 Ohms to match any amp. Box dimensions and weight: 22x16x9.5cm / 1,3kg Product dimensions and weight: 17.5x12.6x6.2cm / 1kg

Torpedo Captor X 16 ohms is a compact reactive load box, amp attenuator, miked cab simulator and IR loader for home, live and studio use. With 32 carefully curated virtual cabinets, 8 microphones per cabinet and 8 room simulations, there simply is no better go direct solution for tube amp lovers. Pair Torpedo Captor X with your phone, tablet, computer or MIDI controller, and shape your tone with Torpedo Remote. Effortlessly select your preset, cabinet speaker, microphones and room acoustic. No other reactive amp attenuator offers such universal control of the miking chain and with dual miking per cabinet, you may never use a real mic again.

The compact loadbox and amp DI. The Torpedo Captor is an easy to use reactive Loadbox, perfect for unleashing your favourite tube amp in a variety of modern applications and venues. Designed to be placed between your amp head and speaker cabinet, it acts as a power attenuator and cabinet simulator, and is packed in a DI sized enclosure. Featuring a complete set of connections as well as the Two notes Wall Of Sound plug-in software, which gives you 16 virtual cabinets to choose from, the Torpedo Captor allows you to easily use your amp at full potential at home, in the studio, or live. - Save space, weight and volume on stage - Easy and fast recording - Use your favourite loud amp at reasonable volume or silently. - Choose between 16 famous virtual cabinets with the Wall Of Sound III plug-in - Available in 4, 8, or 16 Ohms models - Use your amp and play securely The Torpedo Captor allows to capture a rich sound for direct recording without having to mike your speaker. Used without a speaker, it allows to use your amp head in silent mode without any risk. If you wish to keep using a cabinet, the Torpedo Captor features a direct speaker THRU or ATT output which sends either the full volume of the amp to the cabinet or a fixed -20dB attenuation. It also offers a balanced XLR active DI output with selectable guitar or bass simulation taken from the Le Preamp series of preamps, as well as a balanced line output with adjustable output level and polarity switch. It has an admissible power of 100 Watts RMS and is available in 3 models of 4, 8, and 16 Ohms to match any amp. Box dimensions and weight: 22x16x9.5cm / 1,3kg Product dimensions and weight: 17.5x12.6x6.2cm / 1kg

The compact loadbox and amp DI. The Torpedo Captor is an easy to use reactive Loadbox, perfect for unleashing your favourite tube amp in a variety of modern applications and venues. Designed to be placed between your amp head and speaker cabinet, it acts as a power attenuator and cabinet simulator, and is packed in a DI sized enclosure. Featuring a complete set of connections as well as the Two notes Wall Of Sound plug-in software, which gives you 16 virtual cabinets to choose from, the Torpedo Captor allows you to easily use your amp at full potential at home, in the studio, or live. - Save space, weight and volume on stage - Easy and fast recording - Use your favourite loud amp at reasonable volume or silently. - Choose between 16 famous virtual cabinets with the Wall Of Sound III plug-in - Available in 4, 8, or 16 Ohms models - Use your amp and play securely The Torpedo Captor allows to capture a rich sound for direct recording without having to mike your speaker. Used without a speaker, it allows to use your amp head in silent mode without any risk. If you wish to keep using a cabinet, the Torpedo Captor features a direct speaker THRU or ATT output which sends either the full volume of the amp to the cabinet or a fixed -20dB attenuation. It also offers a balanced XLR active DI output with selectable guitar or bass simulation taken from the Le Preamp series of preamps, as well as a balanced line output with adjustable output level and polarity switch. It has an admissible power of 100 Watts RMS and is available in 3 models of 4, 8, and 16 Ohms to match any amp. Box dimensions and weight: 22x16x9.5cm / 1,3kg Product dimensions and weight: 17.5x12.6x6.2cm / 1kg

Torpedo Captor X is a compact reactive load box, amp attenuator, miked cab simulator and IR loader for home, live and studio use. With 32 carefully curated virtual cabinets, 8 microphones per cabinet and 8 room simulations, there simply is no better go direct solution for tube amp lovers. Pair Torpedo Captor X with your phone, tablet, computer or MIDI controller, and shape your tone with Torpedo Remote. Effortlessly select your preset, cabinet speaker, microphones and room acoustic. No other reactive amp attenuator offers such universal control of the miking chain and with dual miking per cabinet, you may never use a real mic again.

TWO NOTES OPUSVoici l'Opus, un simulateur d'amplis et un moteur DynIR complet, qui marque une nouvelle étape dans l'évolution de l'écosystème Two notes. S'appuyant sur la série C.A.B. et leur simulation d'enceintes réputée, l'Opus ajoute la modélisation d'étage de lampe (Tube-Stage Modeling) pour les préamplis et les amplis de puissance, l'intégration MIDI et USB-C, permettant aux musiciens de tous horizons de bénéficier d'un son de qualité supérieur dans un espace de travail mobile.Pour une plus grande facilité d'utilisation, le logiciel Torpedo Remote (compatible iOS / Android / MacOS / Windows) est le point central de votre expérience sonore. Il vous suffit de le connecter à votre téléphone, tablette ou ordinateur pour bénéficier d'une intégration avec tous les paramètres modifiables de l'architecture Opus. Sur le plan sonore, tout ce que vous attendez d'une simulation d'amplis numérique de pointe est là, que ce soit pour une saturation high-gain, un son clair pour accueillir votre pédalier ou encore un grain typé anglais, tout est permis !Points Forts :La plateforme de pédales ultime Amp Sim et DynIR Engine alimentée par la technologie Tube-Stage Modeling (TSM).5 émulations de préamplis TSM, 10 emplacements pour de futurs modèles de préamplis via des mises à jour gratuites du firmware.Simulation d'amplis TSM avec 4 modèles de lampes d'amplis (6L6, EL34, EL84 et KT88), Pentode / Triode, Push-Pull (PP) 'Class AB', ou Single Ended (SE) 'Class A'.Moteur DynIR intégré pour une simulation d'enceinte de premier ordre avec possibilité de double prise de son, 8 micros par enceinte et 12 simulations de salle.Ensemble professionnel de processeurs et d'effets alimentés par DSP comprenant Égaliseur, Enhancer, Noise Gate et Reverb.Préchargé avec la collection d'enceintes DynIR de la série Opus, comprenant 32 enceintes dont des captures de Steve Stevens, Dave Friedman, Pete Thorn, George Lynch et Phil X.99 emplacements de presets et une collection exclusive de plus de 40 presets des séries artistes tels que Pete Thorn, Michael Nielsen, Jack Gardiner, Tom Quayle, Adam Steel, John Browne, Jay Leonard J et bien d'autres (disponibles en téléchargement lors de l'enregistrement du produit).Intégration sans fil et USB avec Torpedo Remote (iOS, Android, MacOS, Windows) pour un modelage de son de niveau expert, une gestion des presets et l'écoute en temps réel de plus de 600 enceintes DynIR.Entrée MIDI pour une assimilation transparente avec des configurations existantes, câble MIDI inclus.Double chargeur IR statique et DI acoustique avec plus de 40 réponses impulsionnelles acoustiques de premier ordre inclus.Connectivité USB-C pour un transfert de données rapide à l'épreuve du temps.Boîtier compact ultra-portable avec châssis métallique robuste.Caractéristiques :Audio numériqueConvertisseurs AD/DA : 24 bits / 96 kHz de qualité studioBande passante (-1dB) 30Hz - 19kHz (-1dB)Gamme dynamique 101dBTraitement interne 32 bits à virgule flottanteTemps de latence 2,2 ms (entrée ligne à sortie ligne)AlimentationPolarité : Centre négatifTension : 12V DCCourant : 200mAConsommation électrique : environ 2WConnecteur de l'adaptateur fourni : 2,1 mm x 5,5 mmPolarité : Centre négatifTension : 12V DCCourant maximum : 2000mADimensions : 121 x 100 x 60 mm Poids : 450gDans la boîte :1x unité OPUS dans une pochette de protection1x adaptateur secteur1x câble USB1x carte mémoire de 256 MB1x câble MIDI vers mini jack 1x guide de démarrage rapide