The LED operator 4 Air has the same functionality as the popular LED operator 4 but with built-in wireless DMX module and battery operated. This solution is ideal for all 4 channel battery operated spots or bars and gives you the freedom to run an entire system in- and outdoor without using a power or DMX cable. It is equipped with the Wireless DMX transmitter module (from Wireless Solutions) which guaranties the best transmission. The LED Operator 4 AIR is easy to use and has preset RGBW colors and chases with adjustable fade, speed and strobe control or can be activated by sound. With a full battery the LED operatior 4 AIR can be used for 8 hours. Specifications Fixtures: 4 Channels: 16 (4 each fixture) RGB Presets: 9 Preset chases: 9 DMX-512: XLR 3 pole Battery: 7.4V 2200mAh Operation time: 8 hours (full battery) Power supply: 8,2V DC 500mA Power consumption: 20 Watt Power connector: Adapter (included) NOTE: only use the original power supply Dimensions: 325 x 140 x 50 mm (LxWxH) Weight: 1,54 kg

Specifications : An affordable solution for controlling all DMX products Drives up to 192 DMX channels Possibility to configure up to 240 scenes 12 channels of individual unit - Drives up to 12 intelligent lights individually with up to 16 DMX channels per unit Units with less than 16 DMX channels can be combined on the same DMX scanner button. Records up to 6 chase configurations with time and fade speed control 8 individual potentiometers for easy configuration for intelligent light modules or dimmers Can be controlled by MIDI channel DMX-512,3-pin XLR signal Internal microphone Remote control: blackout controlled by MIDI input signal Blind function - on-the-fly track bumping - Blind function Use in conjunction with ELP-DMX20 or ELD-DMX20 Polarity switch to accommodate different cable types Power supply: - Min. power supply connection DC 9 V - 12 V, 220 mA included Dimensions: 133 x 483 x 64 mm 19 rack - 3 rack spaces Weight: 2.3 kg Voltage: 120 V / 220 V

Eurolite WLF-1500 Water Low Fog PRO; DMX fog machine installed in a robust case produces water-based ground fog; thanks to ultrasound technology, no CO2 or dry ice is required, making it economical to operate; Integrated in the flight case for high resistance, durability and easy transport; crucial components inside the machine made of stainless steel; Concentrated and even fog output; Adjustable timer with interval, duration and amount of fog; very low fluid consumption; Drain device for easy emptying and cleaning; Short warm-up time: approx. 3 min; Output range: approx. 2 m; Controllable via DMX; Radio remote control; Timer; for applications such as: weddings/galas/events; stage; theater; video and photography; rental companies; Large tank capacity; Monochrome LCD display; With level indicator; Operates with water-based fog fluid; Removable, backlit tank; Tank content: 1.8 l fog fluid and 6.7 l water permanently installed tank; Fluid consumption: approx. 13 ml/min; DMX channels: 1; DMX connection: XLR 3-pin 5-pin In / Out; Power connection: Power Twist In; Control: DMX; Radio remote control; Timer; Power supply: 230 V AC, 50 Hz; Total connected load: 1400 W (heating element: 1000 W); Protection class: IP20; Dimensions WxDxH: 41.5 x 68 x 52 cm; Weight: 34.65 kg; Scope of delivery: 1 x device, 1 x operating instructions, 1 x power cable/power cable, 1 x remote control, 1 x hose, 1 x declaration of conformity,

Eurolite LED CBB-6 COB RGB Bar; LED light effect bar with 6 x 30 W COB LEDs with 3in1 TCL RGB color mixing incl. IR remote control; color mixing infinitely variable; color change adjustable; color fade adjustable; electronic dimmer; stroboscopic effect; Integrated show programs; direct color selection for 18 colors; in 2; 3; 5; 9; 18; 21 CH DMX mode operable; the device is cooled by low-noise fans; Controllable via IR remote control; music control via microphone; master/slave function; DMX; standalone; QuickDMX via USB (optional); W-DMX by Wireless Solution via USB (optional); CRMX by LumenRadio via USB (optional); flicker free; beam angle 38°; including mounting bracket; 4-digit 7-segment LED display; Mains input and mains output for easy interconnection of up to 8 devices; Power supply: 100-240V AC, 50/60Hz; Total connected load: 100 W; DMX connection: XLR 3-pin in / out; Power connection: PowerTwist In / Out; Built-in version Dimensions LxDxH: 69 x 17 x 20 cm; Weight: 6.20kg

Stairville DMX-Master MK II ENC DMX Controller- The Stairville DMX-Master can be operated from maximum of 12 devices with up to 16 DMX channels- It is easy to handle, which makes it ideal for the beginners in the area of scanner and moving lights programming- 2 Encoder wheels for accurate setting of PAN and TILT- The 19" device with 3 rack units is suitable for many applications Thon Case for 3U Lighting Desks Operating from maximum of 12 devices with up to 16 DMX channels- (192 DMX channels) 30 Banks of 8 freely programmable scenes- 240 Programmable scenes- 6 Chases with up to 240 scenes- DMX channel adjusting over 8 faders with bank switching- Scene speed adjustable over the faders- Built-in microphone for Music triggering- Continuous Fade Time setting (0-30 seconds) via sliders- Master Black Out- Manual override of scenes in process- Weight: 2.3 kg- Dimensions: 19" / 3 U 65 mm Installation depth- Dimensions with Frame: 53 x 19 x 9.2 cm

Ultra-high performance LED PAR 56 with 9 extremely bright 3-Watt TRI colour LEDs in a black housing. This high-performance LED PAR has a beam angle of 25 degrees and a power consumption of just 50 Watts. Like all new LED PAR cans, the CLP 56 TRI 3 WPS features a sturdy housing. The double bracket makes this PAR can the ideal lamp for use as a floor PAR or for mounting to cross-beams and bars. It is actuated either via the DMX protocol (3-pole XLR) with six control channels, in master/slave or standalone mode (sound control, colour change, solid colours). It features an integrated microphone and is quick and easy to operate using four buttons and an LED display. - 9 ultra-bright 3-Watt TRI colour LEDs - Beam angle of 25 degrees - Low power consumption of just 50 Watts - Operated via DMX (6 channels), in master/slave mode or standalone mode - Simple to operate using the four buttons and LED display - Double bracket included as standard - Cooling method: Heat sink - Sturdy aluminium housing Specifications - Product: LED Par Can - Type: PAR56 - Colour Range: RGB - Number of LEDs: 9 - LED Type: 3 W TRI Colour - Beam Angle: 25° - DMX Input: XLR 3-pole - DMX Output: XLR 3-pole - DMX Mode: 6-channel - DMX Functions: RGB, Master Dimmer, Strobe, Colour Jump, Colour Fade - Standalone Modes: Static Colour, Colour Change, Colour Fading, Sound Control, Slave - Controls: Mode, Value Up, Enter, Value Down - Indicators: LED Display - Power Supply: 100 V AC - 250 V AC - Power Consumption: 50 W - Power Connector: Earthing contact - Housing Material: Aluminium - Housing Colour: Black - Dimensions without mounting bracket): 230 x 250 x 260 mm

Available in black or white, the Cameo Q-Spot 15 W is a compact, RDM-compatible PAR projector, delivered with 3 lenses for a choice of three starting angles: 4.5°, 10° and 25°. It has a powerful 15-watt warm white LED and 16-bit technology for ultra-progressive dimming. Thanks to its 3600 Hz refresh rate and total absence of flicker, the Q-Spot is ideal for cinema and TV set applications, and its highly efficient convection cooling ensures total operational silence. The Q-Spot 15 offers 3-channel DMX control, automatic music control, Master/Slave and standalone modes, and comes with an infrared remote control for easy control. It features 4 high-definition Dimmer curves with adjustable response to imitate halogen lamps, a high-frequency strobeoscope and an OLED display with 4 user keys for intuitive setup. Its all-metal housing is equipped with 3-pin DMX input/output subbases and a blue and white input/output connector for easy cascade connection. Compact spotlight with warm white LED 15 watts high power 15 watts 3 lenses for 4,5,10 or 25° starting angles RDM compatible 16-bit technology for ultra-progressive dimming No flicker, ideal for use in film and TV shooting 4 high resolution dimming curves, with adjustable response 3-channel DMX control, plus music control and master, slave or stand-alone mode. OLED display with 4 keys, for easy configuration Convection cooling, ensuring total silence during operation Comes with practical infrared remote control SPÉCIFICATIONS Product type PAR spotlights with LEDs Interior Type Colour spectrum Warm white Number of LEDs 1 Colour temperatures 3200 K LED type 15 W Refresh frequency 3600 Hz Dispersion angle 10 °, 25 °, 4.5 ° DMX input 3-pin male XLR connector DMX output 3-pin female XLR connector 3-channel DMX modes DMX Master Dimmer, Sound Control, Strobe DMX features Standalone modes Master / Slave mode, Sound Control Settings Low, Enter, High, Mode OLED display indicators Mains voltage 100 - 240 V, 50 - 60 Hz Power consumption 18 W Input and deflection power supply subbase power supply blue and white Housing material Metal Case color black Cooling Convection cooling Light illuminance 5500lx @ 1m Luminous flux 435 lm CRI 94 Width 89 mm Height (mm) 89 mm Depth 172 mm Weight 1.2 kg

The DDP-610M is a robust and reliable dimming pack which can be used for both touring as well as installation applications. It offers 6 dimmer channels which can be loaded up to 10 Amp each. Each channel is completely patchable. Furthermore each channel can set its dedicated dimming curve (linear, switch, square). In case of any power- or DMX failure the DDP-610M will hold as its latest position ensuring that your venue or gig never will be in the dark. Furthermore up to 12 chases can be stored and recalled for easy recall or stand-alone applications. All functions can be set and controlled by the compact but easy to operate LCD Display. Specifications Input voltage: 230VAC, 50/60 Hz, single phase connection 400VAC, 50/60 Hz, 3-phase connection Channel output: Max. 10 Amp each channel, Total 60A Control: DMX, Local Contral, Built-in chase DMX Channels: 6 Mode: Dim or Switch Protection: Short circuit, temperature, overload Power connection: Terminal Power Output: 16 Pole Multipin Monitor: Control LED per channel, LCD Display Dimensions: 483x380x90 mm (LxWxH) (Rubber feet removed) 483x385x94 mm (LxWxH) (incl. rubber feet) Weight: 12 Kg IP-rating: IP-20

The Mobile Fogger was developed for a photographer on location and came into use in theatrical and cinematic applications. This fog machine is perfect for situations where a touch of fog is required in remote or extraordinary places. The mobile fogger is even capable when a steady stream of fog is needed. The mobile fogger is as big as a small water bottle and can be placed discreetly on props, inside sets or held in the hand. As implied by the name, the mobile fogger's main characteristic is its mobility. The unit works on a 12V DC battery and is very easy to carry and to operate. Specifications : Output: 100 cu. ft /min Power Consumption: 75 W Tank Capacity: 110 cc Battery: DC 12V /2.3 Ah Consumption: 2 cc /min Dimensions: 227 x 66 x 81 mm (LxWxH) Weight: 1,8 kg Flightcase for easy transport inclusive !!!

The DDP-610 is a robust and reliable dimming pack which can be used for both touring as well as installation applications. It offers 6 dimmer channels which can be loaded up to 10 Amp each. Each channel is completely patchable. Furthermore each channel can set its dedicated dimming curve (linear, switch, square). In case of any power- or DMX failure the DDP-610 will hold as its latest position ensuring that your venue or gig never will be in the dark. Furthermore up to 12 chases can be stored and recalled for easy recall or stand-alone applications. All functions can be set and controlled by the compact but easy to operate LCD Display. Specifications Input voltage: 230VAC, 50/60 Hz, single phase connection 400VAC, 50/60 Hz, 3-phase connection Channel output: Max. 10 Amp each channel, Total 60A Control: DMX, Local Contral, Built-in chase DMX Channels: 6 Mode: Dim or Switch Protection: Short circuit, temperature, overload Power connection: Terminal Power Output: 6x Schuko Monitor: Control LED per channel, LCD Display Dimensions: 483x380x90 mm (LxWxH) (Rubber feet removed) 483x385x94 mm (LxWxH) (incl. rubber feet) Weight: 12 Kg IP-rating: IP-20

The DDP-610 is a robust and reliable dimming pack which can be used for both touring as well as installation applications. It offers 6 dimmer channels which can be loaded up to 10 Amp each. Each channel is completely patchable. Furthermore each channel can set its dedicated dimming curve (linear, switch, square). In case of any power- or DMX failure the DDP-610 will hold as its latest position ensuring that your venue or gig never will be in the dark. Furthermore up to 12 chases can be stored and recalled for easy recall or stand-alone applications. All functions can be set and controlled by the compact but easy to operate LCD Display. Specifications Input voltage: 230VAC, 50/60 Hz, single phase connection 400VAC, 50/60 Hz, 3-phase connection Channel output: Max. 10 Amp each channel, Total 60A Control: DMX, Local Contral, Built-in chase DMX Channels: 6 Mode: Dim or Switch Protection: Short circuit, temperature, overload Power connection: Terminal Power Output: 6x Schuko Monitor: Control LED per channel, LCD Display Dimensions: 483x380x90 mm (LxWxH) (Rubber feet removed) 483x385x94 mm (LxWxH) (incl. rubber feet) Weight: 12 Kg IP-rating: IP-20

The ADJ VPar Pak is a compact, low profile LED Par kit with two VPAR LED Pars, a soft case gig bag and an IR wireless remote. The LED Pars feature five 4-Watt, 4-IN1 LED (red, green, blue and amber), a scissor yoke, rubber feet for uplighting and a 4-button DMX display. The VPar is designed for uplighting and stage lighting, and will bring color and excitement to any party. This fixture features an unique sit-flat design so that it may sit directly on the ground or inside truss without the scissor yoke because the power and DMX ins and outs are mounted on the side of the fixture, not on the rear. The VPars offer smooth RGBA Color Mixing, have 40-degree beam angles, 15 built-in color macros, 5 operational modes (including DMX, Sound Active and Master/Slave), and has 8 DMX Channel modes for a variety of programming options. Users can also use the included ADJ LED RC2 IR wireless remote to change colors and functions of the LED Pars. Pack Includes: * 2x VPAR LED Pars * 1x Soft Case Gig Bag * 1x ADJ LED RC2 IR Wireless Remote Specifications : - Ultra bright slim flat black Par with 5x 4-Watt, 4-IN-1 QUAD LEDs (RGBA) casts no RGB shadows - Smooth RGBA Color Mixing (fast or slow color change operation) - Unique sit-flat design: Power and DMX Ins/Outs intelligently designed so the unit can be set flat on the ground or set inside truss - Great as an architectural wall wash or for performance stages where traditional stage lighting emit a lot of heat onto performers - 8 DMX Channel modes: 1, 2, 3, 4, 5, 6, 7 or 8 channels - 5 Operational modes: RGBA Dimmer mode, sound active mode, static color mode, auto run mode (3 auto run modes), and DMX Control - Digital DMX Display with 4-button menu for easy navigation - Stand Alone or Master/Slave Configuration - Beam Angle: 40 degrees - 15 built-in Color Macros - DMX-512 protocol - Color strobe effect - Linkable via 3-pin XLR cable - Electronic Dimming: 0-100% - Flicker Free - Includes a scissor yoke to hang on truss, mount on a wall or set on the ground - Long Life LEDs (50,000 hrs.) - Power Draw: 21W Max - IEC AC input and out put on the side of the fixture to daisy chain the power cords (link up to 30 fixtures) - Compatible with ADJ LED RC2 wireless infrared remote control up to 30 ft./ 10M (included in the pak) - Multi-voltage operation: AC 100V-240V 50/60Hz - Dimensions (LxWxH): 225 x 220 x 85mm - Weight: 1.2 kg. - VPAR Gig Bag inner dimensions (LxWxH): 225 x 200 x 240mm - System Weight: 3 kg. Specifications subject to change without notice.

The ADJ Mega Hex Par is a compact, low profile par designed for up lighting and stage lighting, and will bring color and excitement to any event. This fixture features ADJ s patented sit-flat design so that it may sit directly on the ground or inside truss without the scissor yoke because the power and DMX ins and outs are mounted on the side of the fixture, not on the rear. The Mega Hex Par features 5 x 6-Watt, 6-IN-1 (RGBAW UV) LEDs which offers smooth color mixing and can produce a larger-scale of colors than a 4-color LED, such as hot pink, lime green and electric blue. It has a 25-degree beam angle, 5 operational modes, and 5 DMX Channel modes for a variety of programming options. Users can use the included ADJ UC IR wireless remote to control black out, full on, strobe, dimming, sound active and color change. Or, control these fixtures with ADJ s myDMX software or the Airstream DMX Bridge APP (both sold separately). Spécifications Vibrant slim flat black Par with 5 x 6-Watt, 6-IN-1 Hex (RGBWA UV) LEDs HEX LEDs allow for a wider pallet of colors like hot pink, lime green and electric blue Smooth Color Mixing (fast or slow color change operation) ADJ s patented sit-flat design: Power and DMX Ins/Outs intelligently designed so the fixtures may be set flat on the ground or set inside truss Great as an architectural wall wash or for performance stages where traditional stage lighting emits a lot of heat onto performers 5 DMX Channel modes: 6, 7, 8, 11 or 12 channel modes 5 Operational modes: Auto Run Mode (16 Color Change Mode, 16 Color Fade Modes, and 1 Combined Mode), Sound Active Mode (16 Modes), RGBAW UV Dimmer Mode, Static Color Mode (63 Colors), and DMX Controlled Digital DMX Display with 4-button menu for easy navigation Stand Alone or Master/Slave Configuration Beam Angle: 25-degrees 63 built-in Color Macros DMX-512 protocol Color strobe effect Linkable via 3-pin XLR cable Electronic Dimming: 0-100% Flicker Free Includes a scissor yoke to hang on truss, mount on a wall or set on the ground Long Life LEDs (50,000 hrs.) Power Draw: 30W Max IEC AC input and out put on the side of the fixture to daisy chain the power cords (link up to 30 fixtures) Includes the ADJ UC IR wireless remote and the Airstream IR APP transmitter Multi-voltage operation: AC 100V-240V 50/60Hz Dimensions (LxWxH): 10.25 x 10.25 x 4.25 / 261x260x110mm Weight: 4 lbs./ 1.87 kg. Specifications subject to change without notice.

The ADJ Mega Tripar Profile Plus is a compact, low profile par designed for uplighting and stage lighting, and will bring color and excitement to any party. This fixture features an unique sit-flat design so that it may sit directly on the ground or inside truss without the scissor yoke because the power and DMX ins and outs are mounted on the side of the fixture, not on the rear. The Mega Tripar Profile Plus features 5 x 4-Watt, 4-N-1 RGB UV LEDs which offers smooth Color Mixing, has a 40-degree beam angle, 5 operational modes (including DMX, Sound Active Mode, RGB UV Dimmer Mode, Auto Run Mode, and Static Color Mode), and has 5 DMX Channel modes for a variety of programming options. Users can also use the ADJ LED RC wireless remote, which is sold separately, to control the Mega Tripar Profile Plus. Specifications: - Ultra bright slim flat black Par with 5 x 4-Watt, 4-IN-1 Quad LEDs - Smooth RGB UV Color Mixing (fast or slow color change operation) - Unique sit-flat design: Power and DMX Ins/Outs intelligently designed so the unit can be set flat on the ground or set inside truss - Great as an architectural wall wash or for performance stages where traditional stage lighting emit a lot of heat onto performers - 5 DMX Channel modes: 4, 5, 6, 9 or 10 channel modes - 5 Operational modes: Auto Run Mode (16 Color Change Mode, 16 Color Fade Modes, and 1 Combined Mode), Sound Active Mode (16 Modes), RGB UV Dimmer Mode, Static Color Mode (64 Colors), and DMX Controlled - Digital DMX Display with 4-button menu for easy navigation - Stand Alone or Master/Slave Configuration - Beam Angle: 40 degrees - 64 built-in Color Macros - DMX-512 protocol - Color strobe effect - Linkable via 3-pin XLR cable - Electronic Dimming: 0-100% - Flicker Free - Includes a scissor yoke to hang on truss, mount on a wall or set on the ground - Long Life LEDs (50,000 hrs.) - Power Draw: 21W Max - IEC AC input and out put on the side of the fixture to daisy chain the power cords (link up to 30 fixtures) - Compatible with ADJ LED RC2 wireless infrared remote control up to 30 ft./ 10M (sold separately) - Multi-voltage operation: AC 100V-240V 50/60Hz - Dimensions (LxWxH): 225x220x85mm - Weight: 1.23 kg.

The ADJ VBar Pak is a compact, low profile LED Linear fixture kit with two VBAR LED Bars, a soft case gig bag and an IR wireless remote. The LED Bars feature five 4-Watt, 4-IN1 LED (red, green, blue and amber), adjustable hanging brackets, rubber feet for uplighting and a 4-button DMX display. The VBar is designed for linear uplighting and stage lighting, and will bring color and excitement to any party. The VBars offer smooth RGB Color Mixing, have a 40-degree beam angle, 15 built-in color macros, 5 operational modes (including DMX, Sound Active and Master/Slave), and has 8 DMX Channel modes for a variety of programming options. Users can also use the included ADJ LED RC2 IR wireless remote to change colors and functions of the LED Bars. Pack Includes: * 2x VBAR LED Linear Fixtures * 1x ADJ LED RC2 IR Wireless Remote * 1x Soft Case Gig Bag Specifications : - Ultra bright, compact black Linear fixture with 5x 4-Watt, 4-IN-1 QUAD LEDs (RGBA) casts no RGB shadows - Smooth RGBA Color Mixing (fast or slow color change operation) - Great as an architectural wall wash or for performance stages where traditional stage lighting emit a lot of heat onto performers - 8 DMX Channel modes: 1, 2, 3, 4, 5, 6, 7 or 8 channels - 5 Operational modes: RGBA Dimmer mode, sound active mode, static color mode, auto run mode (3 auto run modes), and DMX Control - Digital DMX Display with 4-button menu for easy navigation - Stand Alone or Master/Slave Configuration - Beam Angle: 40 degrees - 15 built-in Color Macros - DMX-512 protocol - Color strobe effect - Linkable via 3-pin XLR cable - Electronic Dimming: 0-100% - Flicker Free - Adjustable mounting brackets; mount on a wall or set on the ground - Long Life LEDs (50,000 hrs.) - Power Draw: 21W Max - IEC AC input and out put on the side of the fixture to daisy chain the power cords (link up to 30 fixtures) - Compatible with ADJ LED RC2 wireless infrared remote control up to 30 ft./ 10M (included in the pak) - Multi-voltage operation: AC 100V-240V 50/60Hz - Dimensions (LxWxH): 560 x 63 x 90mm - Weight: 1.7 kg. - VBAR Gig Bag inner dimensions (LxWxH): 560 x 165 x 90mm - System Weight: 4 kg. Specifications subject to change without notice.

The ADJ 5PX Hex Pearl is a versatile LED Par fixture with 5 x 12-Watt , 6-IN-1 HEX LEDs in a white metal housing. With a 30-degree beam angle, users may produce wide washes with smooth color mixing from 63 built-in color macros utilizing red, green, blue, amber, white and UV LEDs. Not only is this LED Par great for lighting stages, but with its patent pending, intelligently designed, powerKon and 3 and 5pin DMX connectors, it s great for uplighting a venue. 5PX HEX Pearl professional features include: 4 DMX modes (6, 7, 8, and 12 channel), 5 operational modes, 5 dimming curves, flicker free operation and a 4-Button DMX menu with digital display. Daisy-chain up to 11 units together via the fixtures built-in PowerKon In/Out power connectors. The 5PX HEX Pearl is compatible with the Dotz Par RF, easy-to-use, wireless RF remote (sold separately). Alternatively the fixture may be operated via a DMX controller or the units built-in programs. Specifications: - Ultra bright, flat wash fixture with 5 x Red, Green, Blue, Amber, White and UV LED pixels in a white metal housing - Smooth RGBAW UV color mixing - Great as an architectural wall wash or for performance stages where traditional stage lighting emit a lot of heat onto performers - Intelligently designed, patent pending power and DMX Ins/Outs sit sideways so the unit can be set flat on the ground or set inside truss - 4 DMX Modes: 6, 7, 8, and 12 channel - 5 Operational modes: Static Color Mode, RGBAW and UV Dimmer Mode, Program Mode, Sound Active Mode and DMX Controlled - 7 Built-In Programs - 63 built-in Color Macros - Flicker Free operation (No flickering on camera) - 5 selectable Dim Curves (Standard, Stage, TV, Architectural and Theatre) - LED pulse and strobe effect - Electronic Dimming: 0 - 100% - Beam angle: 30-degree - 4-button, DMX digital display on rear panel - Dotz Par RF wireless remote sold separately - Dual yoke allows fixture to be hung or set on the ground - Data linkable via 3 and 5-pin XLR cables - Power linkable via PowerKon power cables. (11x 5P Hex s Max @ 100V, 21x 5P Hex s Max @ 240V.) - Light Source: 5 x 12-Watt RGBAW UV LEDs, (Rated at approximately 50,000 hrs.) - Power Draw: 60W total (All LED's @ Full On) - Multi-voltage operation: AC 100-240V, 50/60Hz (IEC power In/Out) - Dimensions (LxWxH): 210 x 100 x 220mm - Weight: 2 kg

The Thunder Wash 600 RGB is a Strobe, Blinder and Wash Light all in one. It is equipped with 648 RGB 0.2 Watt SMD LEDs, with an 80° beam angle and features a compact black metal housing with universal mounting bracket. The Thunder Wash 600 RGB comes with 3-pin XLR sockets for DMX input and output, 8 DMX modes with Dimmer, Flash frequency and duration as well as the ability to operate as a Master, Slave, or Standalone. An easy-to-read LED display with buttons for Mode, Enter, Up, and Down is used for manual operation, while the built-in microphone is used for Sound control. Product Type: strobe Type: LED strobe Colour Spectrum: RGB Number of LEDs: 648 LED Type: 0.2 W Refresh Rate: 1 - 30 Hz Beam Angle: 80° DMX Input: XLR 3-pin male DMX Output: XLR 3-pin female DMX Mode: 1-channel, 2-channel 1, 2-channel 2, 3-channel 1, 3-channel 2, 3-channel 3, 4-channel and 6-channel DMX Functions: Flash frequency, Dimmer, Flash duration Standalone Modes: Flash frequency , Dimmer Mode, Sound Control, Slave Mode Controls: Value Up, Value Down, Mode Indicators: LED display Power Supply: 100 V AC - 240 V AC, 50 - 60 Hz Power Consumption: 30 W Power Connector: IEC Housing Material: metal Housing Colour: black Dimensions without mounting bracket Width: 335 mm Height: 93 mm Length: 182 mm

Small Effect Spotlight with RGBW LEDs- Easy and convenient to operate via the IR remote control supplied- 4 2 W LEDs in the colours red, green, blue and white create countless moving colourful dots in the room- Music control and built-in programmes can be called up via the remote control- Power supply: 5V/2A USB-C- Power consumption: 10 W- Dimensions: 158 x 135 x 135 mm- Weight: 0.4 kg- Includes mounting bracket for ceiling installation, USB-C cable and infrared remote control

The Thunder Wash 100 W is a Strobe, Blinder and Wash Light all in one. It is equipped with 132 white 0.2 Watt SMD LEDs, with an 80° beam angle and features a compact black metal housing with universal mounting bracket. The Thunder Wash 100 W comes with 3-pin XLR sockets for DMX input and output, 4 DMX modes with Dimmer, Flash frequency and duration as well as the ability to operate as a Master, Slave, or Standalone. An easy-to-read LED display with buttons for Mode, Enter, Up, and Down is used for manual operation, while the built-in microphone is used for Sound control. Product Type: strobe Type: LED strobe Colour Spectrum: white Number of LEDs: 132 LED Type: 0.2 W Refresh Rate: 1 - 30 Hz Beam Angle: 80° DMX Input: XLR 3-pin male DMX Output: XLR 3-pin female DMX Mode: 1-channel, 2-channel, 3-channel 1, 3-channel 2 DMX Functions: Flash frequency, Dimmer, Flash duration Standalone Modes: Flash frequency , Dimmer Mode, Sound Control, Slave Mode Controls: Value Up, Value Down, Mode Indicators: LED display Power Supply: 100 V AC - 240 V AC, 50 - 60 Hz Power Consumption: 30 W Power Connector: IEC Housing Material: metal Housing Colour: black Dimensions without mounting bracket Width: 310 mm Height: 70 mm Length: 70 mm

The Thunder Wash 600 W is a Strobe, Blinder and Wash Light all in one. It is equipped with 648 white 0.2 Watt SMD LEDs, with an 80° beam angle and features a compact black metal housing with universal mounting bracket. The Thunder Wash 600 W comes with 3-pin XLR sockets for DMX input and output, 5 DMX modes with Dimmer, Flash frequency and duration as well as the ability to operate as a Master, Slave, or Standalone. An easy-to-read LED display with buttons for Mode, Enter, Up, and Down is used for manual operation, while the built-in microphone is used for Sound control. Product Type: strobe Type: LED strobe Colour Spectrum: white Number of LEDs: 648 LED Type: 0.2 W Refresh Rate: 1 - 30 Hz Beam Angle: 80° DMX Input: XLR 3-pin male DMX Output: XLR 3-pin female DMX Mode: 1-channel, 2-channel, 3-channel 1, 5-channel, 7-channel DMX Functions: Flash frequency, Dimmer, Flash duration Standalone Modes: Flash frequency, Dimmer Mode, Sound Control, Slave Mode Controls: Value Up, Value Down, Mode Indicators: LED display Power Supply: 100 V AC - 240 V AC, 50 - 60 Hz Power Consumption: 30 W Power Connector: IEC Housing Material: metal Housing Colour: black Dimensions without mounting bracket Width: 335 mm Height: 93 mm Length: 182 mm