| Manfrotto : LBAG110 Bag 3x Light Stands L (34 comments)
- Suitable for up to 3 light stands- Material: Water-repellent nylon- Padded shoulder-strap- Internal dimensions: 108 x 16 x 11 cm- Outer dimensions: 110 x 16 x 12.5 cm- Colour: Black- Weight: 0.52 kg |
|
| Flyht Pro : Case Production (70 comments)
- Material: 10 mm Plywood- Protection: IP20- Ball corners- Table area: Approx. 770 x 530 mm- Inner dimensions, upper two compartments (W x D x H): 445 x 460 x 80 mm- Inner dimensions, lower two compartments (W x D x H): 405 x 460 x 150 mm (width of dividers: 125 / 135 / 125 mm)- Dimensions (L x W x ...(+) - Material: 10 mm Plywood- Protection: IP20- Ball corners- Table area: Approx. 770 x 530 mm- Inner dimensions, upper two compartments (W x D x H): 445 x 460 x 80 mm- Inner dimensions, lower two compartments (W x D x H): 405 x 460 x 150 mm (width of dividers: 125 / 135 / 125 mm)- Dimensions (L x W x H): 507 x 625 x 771 mm- Weight: 54 kg- Colour: Black |
|
| Flyht Pro : Case Universal for 19" units (124 comments)- 8 Ball corners- Material: 10 mm plywood- With rack rails- Dimensions (L x W x H): 512 x 470 x 214 mm- Weight: 8.10 kg- Colour: Black |
|
| Accu-Case : F4 PAR Bag (Flat PAR Bag 4) (193 comments)- For up to four flat PARs- With detachable, padded compartment dividers- Side pocket for accessories- Made of dirt-repellent and lightweight synthetic material- Internal dimensions: 360 x 250 x 220 mm |
|
| Flyht Pro : Case Outdoor Stage Par 6in1 (4 comments)
- Suitable for 6 Stairville Outdoor Stage PAR 12 x 4 W Quad, Stairville Outdoor Stage Par 12 x 3 W TRI or Stairville Outdoor Stage Par 12 x 3 W WLA- Material: 9 mm black coated multiplex- 4 x 100 mm Swivel castors, 2 of them with brakes- 8 Ball corners- 4 Folding handles- 2 Butterfly latches- Alumin...(+) - Suitable for 6 Stairville Outdoor Stage PAR 12 x 4 W Quad, Stairville Outdoor Stage Par 12 x 3 W TRI or Stairville Outdoor Stage Par 12 x 3 W WLA- Material: 9 mm black coated multiplex- 4 x 100 mm Swivel castors, 2 of them with brakes- 8 Ball corners- 4 Folding handles- 2 Butterfly latches- Aluminium profiles- The interior is with EVA and foam padding- External dimensions (W x H x D, without castors): 900 x 410 x 520 mm- Weight: 29 kg |
|
| Flyht Pro : WP Safe Box 8 IP65 (78 comments)
- Waterproof, dustproof and airtight transport case with sturdy handle- Protection: IP65- Trolley with pull-out handle- Impact-resistant housing made of hard plastic- Rubber seal- Front valve for pressure equalisation- Fixed locking latch- Convoluted foam and die-cut foam cubes on the bottom- Can be...(+) - Waterproof, dustproof and airtight transport case with sturdy handle- Protection: IP65- Trolley with pull-out handle- Impact-resistant housing made of hard plastic- Rubber seal- Front valve for pressure equalisation- Fixed locking latch- Convoluted foam and die-cut foam cubes on the bottom- Can be used at temperatures from -25 °C to + 75 °C- External dimensions (L x W x H): 625 x 420 x 340 mm- Internal dimensions (L x W x H): 581 x 360 x 298 mm- Weight: 7.2 kg- Material: Polypropylene (PP)- Suitable variable inlay: Article no. 480976 (not included) |
|
| Accu-Case : F8 PAR Bag (Flat PAR Bag 8) (99 comments)- Suitable for stowing up to eight Flat PARs- With detachable, padded compartment dividers- Side pocket for accessories- Made of high quality, dirt-repellent and lightweight synthetic material- Inner dimensions: 735 x 250 x 220 mm |
|
| Cameo : Multi PAR Spare Bag (13 comments)- |
|
| Laserworld : PRO-CASE Deluxe (4 comments)
- Internal dimensions: 465 x 350 x 220 mm- External dimensions: 510 x 430 x 240 mm- 2 SwissLas Pure Micro projectors- 2 Laserworld Diode Series projectors- 1 Laserworld Club Series Projector- 1 Laserworld Pro Series Projector- 1 tarm series projector- 1 RTI ATTO series projector- 1 RTI FEMTO series ...(+) - Internal dimensions: 465 x 350 x 220 mm- External dimensions: 510 x 430 x 240 mm- 2 SwissLas Pure Micro projectors- 2 Laserworld Diode Series projectors- 1 Laserworld Club Series Projector- 1 Laserworld Pro Series Projector- 1 tarm series projector- 1 RTI ATTO series projector- 1 RTI FEMTO series projector- 1 SwissLas Purelight series projector in the smallest housing |
|
| Flyht Pro : WP Safe Box 4 IP65 (236 comments)- |
|
| Thon : Case Cameo Hydrabeam 4000 2in1 (8 comments)
- Compartment divider for 2 x Cameo Hydrabeam 4000 RGBW with accessory compartment- Made of 7 mm plywood- Colour: Phenol- 30 x 30 mm Aluminium profile- 2 Folding handles- 2 Butterfly latches- 3 Large locking hinges- Steel ball corners- Custom-made foam padding in base and lid- Interior fittings, 150...(+) - Compartment divider for 2 x Cameo Hydrabeam 4000 RGBW with accessory compartment- Made of 7 mm plywood- Colour: Phenol- 30 x 30 mm Aluminium profile- 2 Folding handles- 2 Butterfly latches- 3 Large locking hinges- Steel ball corners- Custom-made foam padding in base and lid- Interior fittings, 150 mm accessory compartment- Exterior dimensions: 1260 x 355 x 375 mm- Weight: 18.2 kg- Made in Germany |
|
| Thon : Case Look Unique 2 (84 comments)- |
|
| Flyht Pro : B2R Beam Tour Case 2in1 (11 comments)- Suitable for 2x Stairville B2R- Interior of foam- Accessory compartment- Material: 9 mm Black-coated multiplex- 30 x 30 mm Aluminium profiles- Corners- 2 Butterfly closures- 2 Folding handles- 4 Castors (of which two are braked)- Dimensions (WxHxD): 720 x 375 x 635 mm- Weight: 20 kg- Colour: Black |
|
| Flyht Pro : Case for Light Operator 48 (43 comments)- Material: 6 mm MDF- Ball corners- Protection class: IP20- Dimensions (L x W x H): 733 x 372 x 116 mm- Weight: 6.5 kg- Colour: Black |
|
| Stairville : SB-210 Bag 1120 x 170 x 120 mm (418 comments)- |
|
| Flyht Pro : WP Safe Box 7 IP65 (47 comments)
- Waterproof, dustproof and airtight transport case with sturdy handle- Protection: IP65- Trolley with pull-out handle- Impact-resistant housing made of hard plastic- Rubber seal- Front valve for pressure equalisation- Fixed locking latch- Convoluted foam and die-cut foam cubes on the bottom- Can be...(+) - Waterproof, dustproof and airtight transport case with sturdy handle- Protection: IP65- Trolley with pull-out handle- Impact-resistant housing made of hard plastic- Rubber seal- Front valve for pressure equalisation- Fixed locking latch- Convoluted foam and die-cut foam cubes on the bottom- Can be used at temperatures from -25 °C to + 75 °C- External dimensions (L x W x H): 560 x 355 x 290 mm- Internal dimensions (L x W x H): 510 x 290 x 240 mm- Weight: 6 kg- Material: Polypropylene (PP)- Suitable variable inlay: Article no. 471328 (not included) |
|
| Flyht Pro : Case Varytec Hero 4in1 2 (6 comments)
- Suitable for 4 Varytec Hero Wash 340 FX and Hero Spot 90 spotlights- Material: 9 mm Multiplex- With 120 mm accessory compartment- 4 Folding handles- Interior construction from EVA- 8 Rounded ball corners- 2 Butterfly latches- 2 Castors with brakes and 2 without- Exterior dimensions without castors...(+) - Suitable for 4 Varytec Hero Wash 340 FX and Hero Spot 90 spotlights- Material: 9 mm Multiplex- With 120 mm accessory compartment- 4 Folding handles- Interior construction from EVA- 8 Rounded ball corners- 2 Butterfly latches- 2 Castors with brakes and 2 without- Exterior dimensions without castors (W x H x D): 876 x 485 x 603 mm- Weight: 42 kg- Colour: Black laminated |
|
| Flyht Pro : Case Stairville BEL1 6in1 (5 comments)
- Suitable for 6x Stairville BEL1 or BEL1+- Material: Black laminated multiplex- 8 Rounded ball corners- 2 Snap closures- 1 Suitcase handle- 9 cm Accessory compartment in the middle- Interior construction with foam- Dimensions of a single compartment: 145 x 90 x 90 mm- Outer dimensions (W x H x D): ...(+) - Suitable for 6x Stairville BEL1 or BEL1+- Material: Black laminated multiplex- 8 Rounded ball corners- 2 Snap closures- 1 Suitcase handle- 9 cm Accessory compartment in the middle- Interior construction with foam- Dimensions of a single compartment: 145 x 90 x 90 mm- Outer dimensions (W x H x D): 520 x 145 x 360 mm |
|
| Stageworx : LB-3 Truss Bag (111 comments)- Suitable for the two trusses of the LB-3 tripod set- Dimensions: 154 x 34 cm |
|