Eurorack Module- Analogue ring modulator- Noise generator with two outputs for white noise and pink noise- Sample & hold unit with clock out, external clock in and fader for clock rate and lag time- Analogue LFO with 5 waveforms- Fader for frequency and delay time- Three frequency ranges selectable (0.03 - 30Hz)- CV and trigger input and 2 signal outputs- Current consumption: 60mA (+12V) / 50mA (-12V)- Width: 16 HP- Depth: 44 mm

4-Channel PA/ Keyboard Amplifier- Power: 600 W- Equipped with: 15" turbosound speakers- 1 XLR Microphone input- 1 FX Send per channel- Integrated 7-band graphic EQ- KLARK TEKNIK FX processor with 100 presets including reverb, chorus, flanger, delay, pitch shifter and various multi effects- FBQ Feedback detection system- Ground lift switch- Balanced XLR DI stereo output- Link output for true stereo operation- AUX in- Headphone connector- Dimensions (W x D x H): 569 x 372 x 483 mm- Weight: 22.4 kg

Eurorack Module- Voltage-controlled multimode filter with high-pass, band-pass and low-pass characteristics- Band and low-pass filter slope switchable between 12 and 24 dB / oct- Based on Mutable Instruments Ripples- The flowing musical sound colouring is reminiscent of the filters of well-known Japanese synthesizer series- Compensation of level losses at higher resonance values- Wide frequency range from 18 - 18,000 Hz- Purely analogue circuit based on the familiar 2164 and 13700 semiconductor circuits- 2 Audio inputs, one with gain control- FM input with bipolar attenuator- with self-oscillation playable via 1 V/oct. input- Resonance CV input- Power requirement: 35 mA (+12 V) / 35 mA (-12 V)- Width: 8 HP

Eurorack Module- Two independent analogue ADSR envelopes- For each envelope: manual trigger button, gate input, fader for attack, decay, sustain and release- 2 Signal outputs and inverted output- Analogue LFO with 5 waveforms- Fader for frequency and delay time- Three frequency ranges selectable (0.05 - 30Hz)- CV and trigger input and 2 signal outputs- Current consumption: 40mA (+12V) / 40mA (-12V)- Width: 16 HP- Depth: 44 mm

Analogue 8-voice polyphonic synthesizer Two oscillators per voice, each with a selection of saw, triangle, and square wave forms as well as pulse width and level controls Low-pass filter (-24 dB/oct.) with controls for resonance, envelope modulation, and key tracking Noise generator LFO with six selectable wave forms and modulation destinations (pitch, pulse width, and filter frequency) Two ADSR envelopes (filter and VCA) Poly Mod section for modulation of oscillator A and filter frequency via filter envelope and oscillator B Additional controls for glide, master tune, and volume Switchable Unison mode Memory patches for 400 presets Arpeggiator Numerous other parameters adjustable via the menu All sound generation parameters controllable via MIDI CC Fully suitable for Eurorack installation (width: 80 HP) Inputs for sync and filter CV: 3.5mm mini-jack Footswitch input (6.3mm jack) Two line outputs: 6.3mm jack and 3.5mm mini-jack Stereo headphone output: 3.5mm mini-jack MIDI in/out (5-pole DIN) and USB-MIDI Dimensions (W x D x H): 424 x 136 x 97mm Weight: 1.65 kg Power supply included (12V DC2, 1.2A) Suitable cover: Article 477466 (sold separately - not included) Suitable transport cases: Article 480286 and article 483005 (both sold separately - not included) Suitable padded bag: Article 485308 (sold separately - not included)

Eurorack Module- 10-Track drum and trigger sequencer- 1 to 64 steps per track, selection button, trigger output and accent output- Additional functions such as random pattern generation, adjustable probability for individual steps, swing, ratchets, flam, note repeat, step repeat, polyrhythmic patterns and more- Classic step programming and real-time input- Memory locations for 256 patterns and 16 songs- Sync input and output- MIDI input and output: 5-pin DIN- USB-C port for USB-MIDI- CV and reset input- Power requirement: 350mA (+12V) / 20mA (-12V)- Width: 52 HP- Width: 41 mm

4-Channel PA/ Keyboard Amplifier- Power: 600 W- Equipped with: 12" turbosound speakers- 1 XLR Microphone input with permanent 15 volt phantom power supply- FX Send per channel- Integrated 7-band graphic EQ- KLARK FX processor with 100 presets including reverb, chorus, flanger, delay, pitch shifter and various multi effects- FBQ Feedback detection system- Stereo line output via XLR- Link output for stereo operation- Aux input- Headphone connector- Ground lift switch- Dimensions (W x D x H): 468 x 298 x 441 mm- Weight: 18.3 kg- Suitable protective cover: Art. 474277 (not included)

Eurorack Module Ultra-flexible 6-stage envelope, 4-step sequencer and LFO module Based on mutable instrument stages High resolution: 24-bit/48 kHz Individual and groupable segment looping capabilities 3 Different segment types: Ramp, Hold and Step Single segment processing with a duration of 1 ms to 16 s Up to 14 CV generation with precise resolution 12 V 80 mA, -12 V 20 mA Dimensions: 14 HP

Eurorack Module- Ring modulator and VCA- 2 Signal inputs with level control- MOD and UNMOD mode for use as ring modulator or VCA- 2 Adjustable CV outputs for controlling external oscillators- Gate inputs for switching modulation modes- Integrated VCA with gain control and switch between linear and exponential control characteristics- Current consumption: 60 mA (+12 V) / 45 mA (-12 V)- Width: 16 HP- Depth: 43 mm

Power supply module for Eurorack systems- Control LEDs for 12 V, -12 V and 5 V.- Slots for 2 Flying Bus Boards with 7 slots each- Output: 1 A ( 12 V) / 1 A (-12 V) / 0.5 A ( 5 V)- Width: 4 HP- Depth: 52mm- Includes external power supply unit (13 V DC, 3 A), 2 Flying Bus Boards with 7 slots each

Digital Oscillator- With 128 waveforms- 4 Vector oscillators with wavetable synthesis and 128 waveforms- Reproduction of the Prophet VS sound engine- Morphing of all 4 oscillators via joystick- OLED oscilloscope for visualisation of waveforms- Morph control to seamlessly change the character of selected sound sources- Separate joystick CV outputs for external control- USB port for firmware update- Format: Eurorack 14 U

Eurorack Module- Analog synthesizer voice- VCO with triangle, sawtooth and pulse waveforms- Adjustable pulse width with CV input, octave selector and fine tune control- 2 CV inputs with attenuator- Low pass filter with resonance- 2 signal inputs and 2 CV inputs with attenuator- VCA with 2 signal inputs and 2 CV inputs with attenuator, initial gain control and low/high signal outputs- Current consumption: 80 mA (+12 V) / 50 mA (-12 V)- Width: 16 TE- Depth: 46 mm

Analogue 4-Channel Drum Synthesizer Based on a classic drum synthesizer from the late 1970s Four identical channels for generating kick drums, toms, percussion, gongs, bells, cymbals and more Per channel controls for Pitch, Impact Click, Decay Time, Bend Level (positive or negative), Noise/Tone Balance, Effect Range (intensity of LFO and Sample and Hold) and channel volume Each channel can be played via MIDI USB MIDI or mic input Sensitivity adjustable per channel for mic input Per channel audio and mic output Master section with pitch control, level control, LFO (with square and sine waveforms) and sample and hold Can be used as a complete Eurorack synthesizer voice (width: 70 HP) Mix output: 3.5 mm and 6.3 mm jack Pitch input: 3.5 mm and 6.3 mm jack for expression pedal Decay Kill footswitch Input: 6.3 mm jack MIDI In (5-pin DIN) and USB-B port for USB-MIDI Dimensions (W x D x H): 374 x 136 x 93 mm Weight: 1.51 kg

Analogue Drum Machine- 11 Drum sounds: bass drum, snare drum, low tom, mid tom, high tom, rim shot, clap, open and closed hi hat, ride and crash cymbal- 64-Step sequencer with poly meter, step repeat, note repeat, real-time triggering, track mute and track solo- Accent and Flam programmable per instrument- Wave Designer- Dual Mode Filter- Up to 16 songs and 256 patterns storable- Auto Fill function- Auto Scroll function- LED display- Dimensions (W x D x H): 477 x 264 x 78 mm- Includes external power supply (18V DC)- 1 Line output: 6.3 mm TRS jack- Headphone output: 6.3 mm TRS jack- Main return: 6.3 mm jack plug- 10 Line single outputs: 6.3 mm jack- 3 Trigger outputs: 6.3 mm jack- Clock input/output: 3.5 mm jack- USB-B port (USB MIDI)- MIDI in/out/thru: 5-pin DIN

Semi-Modular Percussion Synthesiser- Analogue signal path- 2 Oscillators (pulse, triangle), sync, FM, noise generator (white, pink), 24 dB filter (switchable between low and high pass) and a VCA- Dual step sequencer with 8 steps - up to 10,000 BPM- Polychain option for up to 16 voices- Patch matrix with 15 inputs and 10 outputs- 44 Controllers for real-time control of all important parameters- Design: Desktop- Dimensions (W x D x H): 321 x 164 x 45 mm- Weight: 1.4 kg- Combined line/headphone output: 3.5 mm mini jack- MIDI In/Out/Thru- USB- Input for external 12 V power supply

Eurorack Module- Multi-Engine Oscillator- 20 Synthesis algorithms with 3 editable parameters each- An integrated OLED oscilloscope- A USB-B port for firmware updates- CV inputs for selecting: algorithms, pitch, level and trigger- CV inputs with bipolar attenuators for FM, morph and timbre- 2 Audio outputs- Current consumption: 130 mA (+12 V) / 10 mA (-12 V)- Width: 16 TE- Depth: 45 mm- Virtual Analogue- Waveshaping- FM 2 operators- Grains- Additive- Chords- Speech- Karplus Strong- Super Saw- Wavetable Oscillator- Rain- Noise- Dust- Modal Strings- FM Drum- Bass Drum- Snare Drum- Hi-Hat- Cowbell- Toms

Eurorack Module- Analogue step sequencer with 8 steps and 3 control rows- CV control, mode switch, trigger button and trigger input/output per step- Voltage range selectable per row (+8 V max.)- Internal oscillator as clock source- Clock input/output- Current consumption: 100 mA (+12 V) / 50 mA (-12 V)- Width: 56 HP- Depth: 47 mm

Eurorack Module- 2-Channel sample & hold / random voltage- Internal clock adjustable from 0.03 - 300 Hz- Manual sample button- Clock FM input with attenuator- Signal input with attenuator- Internal random generator with attenuator- Clock from channel A can also be switched to channel B- Current consumption: 40 mA (+12 V) / 40 mA (-12 V)- Width: 16 HP- Depth: 43 mm

Semi-Modular Monophonic Hybrid Synthesiser- 24 Digital sound engines, analogue ladder filter, 32-step sequencer and 16-voice poly-chain- Hybrid synthesiser with digital multi-engine oscillator and classic analogue filter for unique sound creations- Sound generation for all areas from percussion, leads and basses to drums, drones and soundscapes- 24 Digital oscillators, including 15 engines from the well-known Brains module for endless sound experiments- Synthesis models for pitched sounds such as fast leads, broad chords and atmospheric pads- 10 Synthesizer-Engines: Virtual Analog, Waveshaper, FM, Grains, Additive, Chords, Speech, Karplus, Hypersaw und Wavetable- 10 Percussion and noise engines: Rain, Noise, Dust, Modal Strings, FM Drum, Bass, Snare, Hi Hat, Cowbell and Tom- 4 Advanced engines: DX7, TD-3 Bassline, Wavegenerator and Vox- Oscilloscope mode for monitoring input signals- Multifunctional timbre and harmonics controls for complex synthesis settings- Morph control for continuously changing the character of selected sound sources- Classic 24 dB / oct. ladder filter with resonance for classical sounds- Switchable low- and high-pass filter mode for extended sound possibilities- Modern and easy-to-use 32-step sequencer with 64 memory locations- Extended arpeggiator with many patterns for a wide range of playing options- Separate fully analogue LFO with triangle and square waveforms- 16-Voice poly-chain enables the combination of several synthesisers for up to 16-voice polyphony- Semi-modular design with fixed standard routings for immediate start-up without patching- 22 x 22 patch matrix allows extensive and flexible interconnection of sources and destinations- 50 Controllers allow direct real-time access to all important parameters- Extensive MIDI implementation with MIDI channel and voices