| Jaspers : End Plug for tube 37,8 mm Jaspers End Plug for tube 37,8 mm. (Jaspers #62) |
|
| Roadworx : Multi Electric Stand Screw Roadworx Multi Electric Stand Screw - 3/8" screw to add multiple accessoirs to the Multi Electric Stand (sold sepaerately 491963), thread length 27 mm, weight 75 g, colour: black |
|
| KandM : Cable Clamb Spider/Spider Pro
(53 comments)Cable clamp- For the keyboard stands "Spider" or "Spider Pro" - Made of plastic - Colour: Black matt - Weight: 0.01 kg - Width: 7.5 cm - Guide rail holder width: 1.7 cm |
|
| Konig and Meyer : Floor Protection Caps K&M Floor Protection Caps - for K&M keyboard stands, Ø30 mm, colour: black |
|
| Konig and Meyer : Foot End Caps KandM Foot End Caps - for KandM keyboard stands, Ø30 mm, colour: black |
|
| KandM : Stellteller m. Kugelgelenk
(16 comments)Levelling screw- 03-22-868-55 for KandM 18953/KandM 18950 - Screw: M8 x 40 - Diameter of the foot: 30 mm |
|
| Jaspers : Handwheel Set Jaspers Handrad Set (Jaspers #784), Handwheel Set, consisting of one handwheel, diameter 40 mm, one screw M6, one plastic spacer and one metal washer. |
|
| Jaspers : Tube Clamp without Strap Jaspers Tube Clamp without Strap (Jaspers #903), Tube Clamp without Strap, from reinforced plasic, with screw and security nut. |
|
| Jaspers : 905 Tube Clamp with Strap Jaspers 905, Tube Clamp with Strap, from reinforced plastic, with screw and security nut, with a hole in the strap to fasten parts, black |
|
| Ultimate : AX-48 Cable Clip
(26 comments)Cable Clip for Apex- Material: Plastic - Width: 6.3 cm - Guide rail holder width: 2 cm - Colour: Black |
|
| Jaspers : T-Fitting Jaspers T-Fitting from reinforced plastic, with screws and security nuts, for alu tubes 37,8 mm, (Jaspers #901) |
|
| Jaspers : Tube Clamp Joint Jaspers Tube Clamp Joint (Jaspers #908), Tube Clamp Joint 1, from reinforced plastic, with screws and security nuts, rotatable by approx. 190° |
|
| Jaspers : T-Fitting with Handwheel Jaspers T-Fitting with Handwheel, from reinforced plastic, with screws and security nuts, for alu tubes 37,8 mm, (Jaspers #902) |
|
| Jaspers : T-Fitting two-pieced Jaspers T-Fitting, two-pieced, for tube 37,8 mm, from reinforced plastic, with screws and security nuts. Can be fixed at any position without dismantling the stand (Jaspers #601) |
|
| Ultimate : AX-48 Front Stabilizer
(14 comments)Stabiliser- For keyboard stands AX-48-B / AX-48-S / AX-48-BP |
|
| Jaspers : T-Fitting with Handwheel Jaspers T-Fitting, two-pieced, from reinforced plastic, with handwheel, for tube 37,8 mm, with screws and security nuts. Can be fixed at any position without dismantling the stand (Jaspers #602) |
|
| Roadworx : Synthesizer Stand Extension Roadworx Synthesizer Stand Extension - extension brackets for adding a second Synthesizer Stand (only in addiiton with two 491891Roadworx Synthesizer Stand); dimensions each bracket(WxHxD) 15 x 140 x 180 mm; weight 0,6 kg |
|
| Fun Generation : Key Stand Support de clavier- Système de serrage rapide - Hauteur réglable de 620 mm (largeur 960 mm) à 960 mm (largeur 290 mm) - Longueur des pieds: 500 mm - Profondeur: 340 mm - Dimensions plié: 990 x 70 x 500 mm - Poids: 2,7 kg |
|
| KandM : 18864 Threaded bolt set for the Spider Pro- Necessary for the installation of extension rod KandM 18872 in conjunction with laptop support - Thread: M8 / 3/8" - Black zinc-plated - Material: Steel |
|
| Jaspers : Mic Boomarm Holder f. V,M,S
(11 comments)Micro Boom Arm Holder- For keyboard stands from the V, M, S series |
|
My account (login)
GUITAR & BASS
DRUM & PERCUSSION
PIANO & KEYBOARD
BRASS & WIND
VIOLIN & TRAD.
STUDIO
SOFTWARES
PA
LIGHTING
DJ
MICROPHONES
EFFECTS
FLIGHTCASES
CABLES
ACCESSORIES
KIDS
