| Jaspers : Strengthening Set 150B (20 comments)- Item # 533 on the Jaspers website- For Jaspers keyboard stands 150- Colour: Black |
|
| KandM : 18866 Spider Pro Arm Set B (48 comments)Support arm set B- For "Spider pro" keyboard stands- Additional extendable 15 degree tilt angle support arms- With mounting brackets- Weight: 0.94 kg- Colour: Black |
|
| Jaspers : Caster Set with 4 casters/75 (7 comments)- Set of 4 swivel casters- Diameter: 75 mm- 2 Casters from the set can be locked- Max. load bearing capacity: 75 kg per piece- Includes threaded bolts for attaching |
|
| Jaspers : T-Fitting two-pieced (11 comments)- Two-piece fitting- For tubes with dimensions of 37.8 mm- Made from glass-fibre reinforced plastic- Includes screws and security nuts- Can be attached in any position without disassembling the stand |
|
| Jaspers : T-Fitting with Handwheel (3 comments)- Two-piece fitting- For tubes with dimensions of 37.8 mm- Made from glass-fibre reinforced plastic- Includes screws and security nuts- Can be attached to a stand in any position without disassembling the stand |
|
| Jaspers : Caster Set with 4 casters/100 (2 comments)- Set of 4 swivel casters- Diameter: 100 mm- 2 Casters from the set can be locked- Max. load bearing capacity: 55 kg per piece- Includes screws and spring washers for attaching |
|
| Jaspers : T-Fitting (6 comments)- For an aluminium tube: 37.8 mm- Made from glass-fibre reinforced plastic- Includes screws and security nuts |
|
| Jaspers : Tube Clamp without Strap (10 comments)- Without a strap- Made from glass-fibre reinforced plastic- Includes a screw and security nut |
|
| KandM : Spider pro Mikrofonhalter (12 comments)- For Spider pro- With 3/8" or 5/8" threaded connection for attaching microphone boom arms and a cable clamp for cable guide |
|
| KandM : 18864 (23 comments)- Necessary for the installation of extension rod K&M 18872 in conjunction with laptop support- Thread: M8 / 3/8"- Black zinc-plated- Material: Steel |
|
| Jaspers : Tube Clamp Joint (5 comments)- Made from glass-fibre reinforced plastic- Includes screws and security nuts- Rotatable by approx. 190° |
|
| Jaspers : Mic Boomarm Holder f. V,M,S (14 comments)- For DVMRS keyboard stand- 3/8" thread |
|
| KandM : Cable Clamb Spider/Spider Pro (69 comments)- For the keyboard stands "Spider" or "Spider Pro"- Made of plastic- Colour: Black matt- Weight: 0.01 kg- Width: 7.5 cm- Guide rail holder width: 1.7 cm |
|
| Ultimate : AX-48 Carrying Handle (35 comments)- Colour: Black |
|
| Jaspers : Handwheel Set (4 comments)- Diameter: 40 mm- Included: 1x handwheel, 1x M6 screw, 1x spacer, 1x washer |
|
| Jaspers : T-Fitting with Handwheel (1 comments)- For an aluminium tube: 37.8 mm- Made from glass-fibre reinforced plastic- Includes screws and security nuts |
|
| Konig and Meyer : Foot End Caps (8 comments)- Diameter: 30 mm- Colour: Black |
|
| KandM : Stellteller m. Kugelgelenk (25 comments)- 03-22-868-55 for K&M 18953/K&M 18950- Screw: M8 x 40- Diameter of the foot: 30 mm |
|
| Jaspers : End Plug for tube 37,8 mm (13 comments)- For tubes with dimensions of 37.8 mm |
|
| Roadworx : Multi Electric Stand Screw (3 comments)- For attaching additional accessories to the Roadworx Multi Electric Stand (Art. 491963)- Thread length: 27 mm- Weight: 75 g- Colour: Black |
|