Several different reverb types, from natural-sounding small rooms to expansive atmospheres - all with a single control- Ensemble subtly adds a harmonically rich room reverb or a lush synthetic string reverb under your guitar playing- Controls: Mix, Mod, Tone, Pre-Delay, Decay- Switch: Ensemble off/mp/forte, I/O mode selector mono/mono/stereo/stereo- LED: Effect on- Footswitch: Effect bypass- Mono/stereo input: 6.3 mm stereo jack- Mono/stereo output: 6.3 mm stereo jack- EXP/MIDI: 6.3 mm stereo jack- Mains adapter connection: Hollow female plug 5.5 x 2.1 mm, negative pole internal- Power consumption: 250 mA- Power supply via 9 V battery or 9 V DC mains adapter (suitable mains adapter art. 409939, not included)- True bypass- Dimensions (W x D x H): 43 x 114 x 56 mm

Eurorack Module 32-voice Karplus-Strong synthesis module for realistic string, tube, wind and percussive sounds Two independent voice engines: Solo Voice and Chord Voice, each with 16-note polyphony Chord Voice generates chords based on V/Oct CV and harmony selection Solo voice controllable via MIDI with velocity sensitivity Timbre selection with positive or negative feedback polarity CV control for key parameters such as attack, decay, damping, pitch, detune and harmony Four selectable output modes: Wide Stereo, Narrow Stereo, Split Voice, Mono 32-bit floating point audio processing with 520MHz ARM processor Current consumption: 120 mA ( 12 V) / 120 mA (-12 V) Width: 12 HP Depth: 38 mm

Tape Delay and Looper- Eurorack module- 4 Playback heads and 1 recording head- 3 Modes: Echo, Sound On Sound Looper and Phrase Sampler- Varispeed algorithm- Self-oscillating for sound generation- Independent spring reverb- Integrated Sharc DSP- Dedicated control of tape mechanics state and sound: Low Cut, Tape Age, Crinkle, Wow & Flutter, Transport Section- Phase-aligned clock output (CLK OUT) CVs synchronized with clock input (CLK IN) CVs- Maximum delay / loop duration: 15 Seconds at maximum speed and 2 minutes at minimum speed- Sample Rate: 96 kHz- Power requirement: +12 V / 210 mA / -12 V / 210 mA / +5 V / 0 mA- Dimensions (W x D): 28 TE x 41 mm

Reverb- 12 different studio class reverb machines, Rooms, Reverbs, Plates and Springs- 300 programmable user presets- Press-and-hold sustain and Freeze function (infinite)- Extreme settings- Fully controllable by midi- Ultra low noise 24-bit 96 kHz converter- Controller for: Decay, Pre-Delay, Mix, Tone, Mod, Low end, Mid and Size- LED status display- Patch display- Stereo input and output- Toggle switch for feedback loop- Expression pedal input (can be saved and controlled)- Incl. 9V power supply (female DC)- Made in USA

Effect Pedal for Electric Guitar- Tape Saturation- Tape Echo- Tape Chorus- Tape Flanger- 2 Selectable tape voicings: classic, cassette- 3 Blend types: Sum, Invert, Bounce- New dedicated tone control with direct influence on tape saturation tone colouration- Full MIDI integration via TRS-MIDI or USB-C MIDI- Up to 300 presets storable via MIDI- Premium JFET analogue front-end- New 520MHz ARM Superscalar processor- 24-bit 96kHz A/D D/A converter- Controls: Saturation, Volume, Tone, Blend, Lat Time, Wobble- Switches: Voice, Type, Mono/Stereo- LED: Tape Saturation On- Footswitch: Tape Saturation On, Doubletracker On- Connectors: Input (6.3 mm TRS jack), Output L/R (6.3 mm jack), EXP/MIDI (6.3mm TRS jack), USB-C- Power adapter connector: Hollow female plug 5.5 x 2.1 mm, negative pole inside- Power consumption: 300mA mA- Powered by a 9 V DC mains adapter (included)- True bypass- Dimensions (W x D x H): 102 x 114 x 44 mm- Made in USA

Effect Pedal for Electric Guitar- New full-stereo dual-engine IR flagship reverb- Two reverbs at once, in series, in parallel and with split audio routing- New pan control per engine- 12 World-class reverb engines with new algorithms- Plus significant improvements for Big Sky classics- Brand new pulse and chamber algorithms- 22 Pre-installed IRs with 10sec IR playback and full editing function as well as custom long IR recordings of classic studio equipment- Dedicated Infinite/Freeze footswitch (for placing pads)- New OLED display- Latency-free analogue dry path- USB-C socket for firmware updates and patch upload/download/real-time desktop parameter control/IR loading via Strymon's free Nixie 2 Editor- Dual Ultra-High-Performance 800MHz Tri-Core 32-Bit Floating ARM Processor- Controls: Type, Value, Decay, Pre-Delay, Tone, Mod, Parameter 1 + 2, Mix- LED: Effect A On, Effect B On, Infinite- Footswitch: Effect A On, Effect B On, Infinite- Mono/Stereo input: 2x 6.3 mm jack- Mono/Stereo output: 2 x 6.3 mm jack- EXP input: 6.3 mm stereo jack- MIDI In- MIDI Out- Power supply connection: Barrel connector 5.5 x 2.1 mm, centre negative- Power consumption: 500 mA- Power supply with a 9 V DC mains adapter (not included)- Suitable optional power supply: Art.409939- Switchable true or buffered bypass- Dimensions (W x D x H): 171 x 127 x 47 mm- Made in USA

Delay- 12 Selectable delay types- Adjustable delay modulation- Independent delay and mix level controls- 200 presets- Analogue signal path for the dry signal- Integrated looper with up to 30 seconds recording time- Loop-in path to enable further sound shaping of the delay by external effects- Controls: Type, Value, Time, Repeats, Mix, Filter, Grit, Speed, Depth- LED: Effect A On/Loop record, Effect B On/Loop play, Tap Tempo/Looper active- LED display- Footswitch: Effect A On/Loop record, Effect B On/Loop play,- Tap/Enter Exit Loop- Mono/stereo input: 2x 6.3 mm jack plug- Mono/stereo output: 2x 6.3 mm jack plug- EXP In: 6.3 mm jack- Midi In- Midi Out- Mains adapter connection: Barrel connector 5.5 x 2.1 mm, negative polarity inside- Power consumption: 300 mA- Power supply with a 9 V DC mains adapter (included in delivery, suitable spare mains adapter: Art.409939)- Switchable true/buffered bypass- Dimensions (W x D x H): 171 x 127 x 47 mm- Made in USA

Effect Pedal For Electric Guitar- Reverb- 3 Selectable reverb types: Room, plate, spring- 3 Selectable modulation levels: Off, light, deep- Shimmer effect can always be used via newly added knob- Favourite setting can be stored on the Favorite button and recalled regardless of knob positions- Full MIDI integration via TRS-MIDI or USB-C MIDI- Up to 300 presets can be stored via MIDI- Premium JFET analogue front end- New 520MHz ARM Superscalar processor- 24-bit 96kHz A/D D/A converter- Controls: Decay, pre-delay, low-cut, high-cut, mix, shimmer- Switches: Verb, mod, mono/stereo- LED: Favorite, status- Footswitch: Favorite, bypass (On)- True bypass- Input: 6.3 mm TRS jack- Output L/R: 2x 6.3 mm jack plug- EXP/MIDI: 6.3 mm TRS jack- USB-C connector- Power adapter connector: Hollow female plug: 5.5 x 2.1 mm, negative pole inside- Powered by a 9 V DC mains adapter (included in the delivery)- Power consumption: 300mA- Dimensions (W x D x H): 102 x 114 x 44 mm- Made in USA

9 x Fully insulated high current outputs- 7 x 9VDC / 500mA- 2 x with 9 V DC / 500 mA- 12 V DC / 375 mA or 18 V DC / 250 mA options- Removable IEC power cord- 24V OUT jack allows connection to additional outputs via Strymon- Ojai (sold separately, not included)- Dimensions: 173 x 84 x 46 mm- Weight: 680 g- Including 9 pedal cables: 5.5 mm x 2.1 mm barrel connectors, center negative, right angle to straight cables- Made in USA

Reverb Eurorack module- Three selectable reverb types for a variety of ambient textures- Four octaves of Karplus string synthesis with attenuation control for string/verb- LFO section: different waveforms to modulate delay time, reverb size or filter- Filter section with 4-pole 24dB/octave low-pass filter with variable resonance- Harmonics section to expand the sound spectrum of the reverb- Adjustable shimmer for additional +/- 1 octave pitch shift of the reverb- Mica for dynamic amplification of overtones- Adjustable size of the reverb core - increasing or decreasing the space for reflections, allowing control of the pitch of the regenerating reverb- Infinite freezes the input signal before the reverb tank- Stereo inputs and extensive CV control of parameters- Independent wet and DRY level controls- Access to four presets from the front panel- USB port on the rear panel (firmware updates)- 4-Bit 96kHz A/D and D/A converters- Analogue dry signal is not converted- Current consumption: 210 mA (+12 V) / 210 mA (-12 V)- Width: 28 HP- Depth: 41 mm

MIDI interface- Works with most effect pedals with 6.3 mm stereo jack MIDI connection- Independently configurable- Sends MIDI control change messages from a sequencer to synchronise pedal parameter changes- Automated pedal preset changes- Loads and saves presets or sends SysEx messages - all from the computer- Distributes MIDI messages from a MIDI controller or interface to devices connected to the 1/4-inch jack and 5-pin DIN MIDI OUT connectors- All MIDI data received from the pedals at the 1/4-inch jacks is merged and sent to the 5-pin DIN MIDI connector- LED: Effect On- Footswitch: Effect Bypass- MIDI In & Out: 2 x 5-PIN DIN- MIDI connection 1-4: 4 x 6.3 mmm stereo jack- Mains adapter connection: Hollow plug socket 5.5 x 2.1 mm, negative pole inside- Power consumption: 50 mA- Power supply via USB or a 9 V DC mains adapter (not included, suitable mains adapter: art. 409939)- Dimensions (W x D x H): 90 x 72 x 38 mm- Weight: 141 g- Incl. 4 x 46 cm right angle to straight jack cable, 1 x USB Type-C to USB-A Male cable- Made in USA

Modulation effect- 12 Selectable modulation types- 200 Presets- Loop-in for connecting further effects, which can be routed variably in the effect sequence (before or after the Mobius) via switch- LED display- True bypass- Controls: Type, Value, Speed, Depth, Level, Parameter 1, Parameter 2- Switch: Stereo In/Out // Pre/Post- LED: Effect A On, Effect B On, Tap Tempo- Footswitch: Effect A On, Effect B On, Tap Tempo- Power consumption: 300 mA- Power supply via 9 V DC mains adapter (included in delivery)- Dimensions (W x D x H): 171 x 127 x 47 mm- Made in USA- Includes 9 V DC power adapter- Mono/stereo input: 2x 6.3 mm jack- Mono/stereo output: 2x 6.3 mm jack- EXP input: 6.3 mm jack- Midi In- Midi Out- Power supply connection (barrel connector socket 5.5 x 2.1 mm - negative polarity inside)

Effect Pedal for Electric Guitar Faithful emulation of the classic Oil Can Echo for dark, modulated echoes with organic movement A special algorithm replicates the rotating oil-dielectric design Discrete stereo processing Controls: Mix, Time, Regen, Intensity, Rate Switches: Heads: Long / Short / Both I/O Mode: Mono / Mono to Stereo / Stereo Switchable true/buffered bypass LED: Effect on Footswitch: Effect bypass Mono/stereo input: 6.3 mm stereo jack Mono/stereo output: 6.3 mm stereo jack EXP/MIDI: 6.3 mm stereo jack USB Power supply connection: Barrel connector 5.5 x 2.1 mm, centre negative Current consumption: 250 mA Power supply with a 9 V DC mains adapter (not included, suitable power supply unit: Art.409939) Dimensions (W x D x H): 43 x 114 x 56 mm Note: Battery operation not supported

Reverb Eurorack module- Three selectable reverb types for a variety of ambient textures- Four octaves of Karplus-Strong string synthesis with string/verb damping control- LFO section: different waveforms for modulating the delay time, the size of the reverb or the filter- Filter section with 4-pole 24dB/octave low-pass filter with variable resonance- Harmonics section for expanding the tonal spectrum of the reverb- Adjustable shimmer for additional /- 1 octave pitch shift of the reverb- Glimmer for dynamic enhancement of harmonics- Adjustable reverb core size to increase or decrease the space for reflections, allowing for pitch control of the regenerating reverb content- Infinite freezes the input signal before the reverb tank- Stereo inputs and extensive CV control of the parameters- Independent wet and dry level controls- Access to four presets from the front panel- Rear USB port (firmware updates)- 4-Bit 96kHz A/D and D/A converter- Analog dry signal is not converted- Current requirement: 210mA ( 12V) / 210mA (-12V)- Width: 28 HP- Depth: 41mm- Colour: Black

Effects Pedal- Delay with 3 different magnet delays (drum, tape, studio), spring reverb and looper- True Bypass- Switchable buffered bypass- Controls: Rec Level, Mechanics, Time, Repeats Echo Level, Low Cut, Wear, Spacing, Spring- Pushbuttons: On, Favorite, Tap- Switch: Type, Speed- LED: Effect On- Display: LED- Foot-switch: Effect bypass- Current consumption: 300 mA- Powered by a 9 V DC power supply (included)- Dimensions (W x D x H): 177 x 114 x 45 mm- Weight: 200 g- 2 Inputs (6.3 mm jack)- 2 Outputs (6.3 mm jack)- Expression connection- MIDI input and output- USB- Mains adapter connection (hollow plug socket 5.5 x 2.1 mm, minus pole inside)

Effect Pedal for Electric Guitar- Tremolo/Reverb- 3 Different reverb variations: 60's, 70's and 80's reverb- 3 Different tremolo variations: Photo Tremolo (65'Style), Tube Tremolo, Harmonic Tremolo- Reverb and Tremolo can be individually activated, adjusted and the order changed- Pre-Delay can now be adjusted via secondary function- Full MIDI integration via TRS-MIDI or USB-C MIDI- Up to 300 presets can be stored via MIDI- Premium JFET Analog Frontend- New 520MHz ARM Superscalar processor- 24-bit 96kHz A/D D/A converter- Controls: Intensity, Speed, Mix, Decay, Color- Switches: Tremolo, Reverb- LED: Tremolo On- Reverb On- Footswitch: Tremolo On, Reverb On- Connectors: Input (6.3mm TRS jack), Output L/R (6.3mm jack), EXP/MIDI (6.3mm TRS jack), USB-C- Power adapter connector: Hollow female plug 5.5 x 2.1 mm, negative pole inside- Power consumption: 300 mA; Powered by a 9 V DC mains adapter (included)- True bypass- Dimensions (W x D x H): 102 x 114 x 44 mm- Made in USA

Effects Pedal for Electric Guitar- 24 bit/96 kHz 500 millisecond IR specification offers extremely detailed amp/cab simulations- 3 Matrix-modelled amplifier models based on some of the most sought-after American and British amplifiers- 4 Presets (3 plus onboard favourite) with a MultiSwitch Plus (300 via MIDI)- 9 Directly selectable IR cabinet models (300 via MIDI)- USB port for loading IR files and firmware updates- Load your own impulse responses with the free Strymon Impulse Manager software- Headphone connection enables silent rehearsals and latency-free monitoring- Controls: Drive, Level, Bass, Middle, Treble, Room- Switches: Amp Mode, Cab Mode- LED: Effect on, Favorite- Footswitch: Effect bypass, Favorite- Mono/Stereo input via 2 x 6.3 mm jack- Mono/Stereo output via 2 x 6.3 mm jack- EXP input- Power adapter connection: Barrel plug socket 5.5 x 2.1 mm, negative polarity inside- Power supply via 9 V DC power adapter (included)- Dimensions (W x D x H): 102 x 114 x 44 mm- Made in USA

Tape Delay- Detailed replica of a real tape echo- 3 Different tape echoes: Fixed, multi, single- With 3 different operation modes each: A, B, C- Spring control to control the newly added spring reverb- Full MIDI integration via TRS-MIDI or USB-C MIDI- Up to 300 presets storable via MIDI- Premium JFET analog front end- New 520MHz ARM Superscalar processor- 24-bit 96kHz A/D D/A converter- Controls: Time, wow&flutter, tape age, repeats, mix, spring- Switches: Tape head, mode, mono/stereo- LED: Tap, status- Footswitch: Tap tempo, bypass- True bypass- Input: 6.3 mm TRS jack- Output L/R: 6.3 mm jack- EXP/MIDI: 6.3mm TRS jack- USB-C connector- Power adapter connector: Hollow female plug: 5.5 x 2.1 mm, negative pole inside- Powered by a 9 V DC mains adapter (included in the delivery)- Power consumption: 300 mA- Dimensions (W x D x H): 102 x 114 x 44 mm- Made in USA

5 Fully insulated high current 9 V DC / 500 mA outputs- Power supply and IEC power cable included- 24 V thu jack allows connection to additional Strymon Ojai (sold separately)- Dimensions: 81 x 58 x 33 mm- Weight: 130 g- Including 5 pedals: 5.5 x 2.1 mm coaxial connector - negative pole inside, angled to straight connector- Made in USA