For passive pickups of acoustic guitars, violin, viola, cello, mandolin and similar instruments- Single-channel preamp and impedance converter- Gain adjustable from 0 to 20 db- Power supply: 9 V block battery (not included)- Battery life: up to 2000 hours- Includes belt clip

Pickup for Western Guitar- Installation directly on the top below the bridge- Installation using double-sided special adhesive tape or special adhesive- Balanced and extremely authentic sound reproduction- Excellent anti-feedback properties- Suitable for all body types- Quick and easy installation- Plastic foot- Completely pre-wired- Includes endpin socket and mounting material

Pickup for Acoustic Guitars- Installation directly on the top below the bridge- Mounting with special double-sided adhesive tape or special adhesive compound- Balanced and extremely authentic sound reproduction- Excellent anti-feedback properties- Rosewood bridge- Suitable for classical and flamenco guitars- Quick and easy installation- Completely pre-wired- Incl. endpin jack and mounting material

2 Channels each with a gain control- Channel 1 is configured to pre-amplify a pickup- Channel 2 can amplify both a pickup and a microphone (switching via a built-in switch)- In condenser microphone mode, up to 9 volts DC voltage is provided- Input Jack: 1/4" stereo jack- Output jack: 1/4" TS- Battery life: approx. 2000 hours- Requires the use of a stereo cable (cable and battery are not included!)

PCB Preamp- Single channel JFET board preamplifier- Input impedance: up to 10 MOhm- Output impedance: less than 3.5 KOhm- Operating time with 9V alkaline battery: 1500 hours (not included!)- Operating time with 2 CR2032 button batteries totalling 6V: 750 hours (not included!)- Dimensions: 28.5 x 18.5 x 4.5mm- Includes belt clip

2-Channel Jfet Circuit Board Preamp- Two separate inputs- Condenser microphone on channel 1- Pickup on channel 2- Two separate outputs that can be connected for mono output- Input impedance: Up to 10 MOhm- Output impedance: Less than 3.5 KOhm- Battery life: 9 V alkaline up to 1000 hours or 2 CR2032 button cells with a total of 6 V up to 375 hours (batteries not included)- Dimensions: 28.5 x 25.4 x 4.5 mm

Pickup for Western Guitar- With endpin preamp- 9 V Battery operation with approx. 2000 h runtime- Discreet volume / tone control for mounting in the sound hole- Installation directly on the top, below the bridge- Installation using double-sided special adhesive tape or special adhesive- Balanced and extremely authentic sound reproduction- Excellent anti-feedback properties- Suitable for all body types- Quick and easy installation- Plastic foot- Completely pre-wired- Includes endpin socket and mounting material

Pickup For Cello- Easy and unproblematic installation and removal- Is placed on the bridge with a residue-free adhesive compound- The jack socket is suspended above the string holder between the strings

Pickup for Viola / Violin- The pickup is tacked to the bridge of the instrument using a small amount of putty and can be removed again at any time easily, therefore the pickup need not remain permanently attached to the instrument- Includes SJA Plus jack assembly and volume control

Pickup for violins- To be integrated into a maple bridge of medium density- Incl. SJAplus jack assembly with volume control and chinrest-style hardware

Passive Pickup System for Double Bass Complete system with bridge pickup, slap pickup and volume control for both pickups Bridge pickup with a thickness of 6.35 mm, requires a slot opening of 5.7 mm in the bridge, is slightly compressed when installed in the bridge slot With 6.3 mm jack socket, which is hooked in between the D and A strings above the string holder Slap pickup mounted under the fingerboard with 3M VHB mounting tape Volume control with two knurled wheels for both pickups, mounted under the fingerboard with 3M VHB mounting tape Can be connected directly to the bass amplifier The sound can be further enhanced with an external preamp (not included).

Universal Pickup- The LP-15 are extremely thin and extremely lightweight top pickups with a thickness of only 1.25 mm- The sensor weighs less than 2 grams and does not hinder the vibrations of the top- 6.3 mm jack socket- With cable

Internal volume / tone control- Double thumbwheel: 2x volume or 1x volume / 1x sound- Suitable for mounting in the sound hole of the instrument- When used as a tone controller, a corresponding capacitor is required- Included double thumbwheel, tone capacitor (for using a thumbwheel as tone poti), 2 adhesive strips 3M VHB for mounting on the sound hole, approx. 60cm cable, connection examples