SPECIFICATIONS : Roland TD-07KV: V-Drums Kit -Kit configuration Kick: KD-10 Snare: PDX-8 Hi-hat: CY-5 Hi-hat control pedal: Detactable for half-open stroke Tom: PDX-6A x 3 *2 Crash: CY-8 Ride: CY-8 Drum stand: Four-post type rack stand (WITHOUT BASS DRUM PEDAL, DRUM THRONE NORE DRUMSTICKS - Drum kits 50 (Preset: over 20) -Instruments 143 -Effect Types Pad Equalizer: each pad Overhead Mic Simulator Room Multi-Effects: 1 system, 30 types - Coach functions (5 modes) Time check (easy) Time check (hard) Quiet count Auto up/down Change-up - Metronome Tempo (20--260) Rhythm type (5 types) Sounds (15 types) -Bluetooth Supported standards: Bluetooth Ver 4.2 Supported profile: A2DP (Audio), GATT (MIDI over Bluetooth Low Energy) Codec: SBC (Support to the content protection of the SCMS-T method) - Display 16 characters x 2 lines LCD (with backlight) - Connectors OUTPUT/PHONES jack: Stereo miniature phone type MIX IN jack: Stereo miniature phone type USB COMPUTER port: USB B type TRIGGER INPUT connector: DB-25 type (Kick, Snare, Tom 1, Tom 2, Tom 3, Hi-hat, Crash 1, Crash 2, Ride, Hi-hat control) -USB COMPUTER Speed: Hi-speed USB Driver mode: Generic, Vender Protocol: USB MIDI, USB Audio *3 -USB Audio Sampling Rate (original): 44.1 kHz Sampling Rate (with sampling rate converter): 96 kHz, 48 kHz Record: 2 channels Playback: 2 channels -Power supply AC adaptor (DC 12 V) - Current draw 250 mA -Dimensions 1,230 (W) x 1,100 (D) x 1,200 (H) mm 48-3/7 (W) x 43-5/16 (D) x 47-1/4 (H) inches (including sound module, kick pad, kick pedal and drum throne) -Weight 21.7 kg / 47 lbs 14 oz - Accessories Setup Guide Owner's Manual Leaflet USING THE UNIT SAFELY AC adaptor Special connection cable Roland introduces the TD-07KV V-Drums, a compact and affordable new drum set added to the acclaimed V-Drums family. Over two-plus decades, V-Drums have established a well-earned reputation as the most realistic, best playing, and best sounding electronic drums available. The TD-07KV carries on this proud legacy to provide the finest electronic drumming experience in its class, offering authentic Roland mesh-head snare and tom pads, large V-Cymbals, premium drum sounds, Bluetooth and USB connectivity, and much more. At the heart of the TD-07KV is the powerful TD-07 sound module. It s filled with acoustic drums and percussion captured in precise detail in pro studios, brought to life with advanced V-Drums technologies that make them behave just like their acoustic counterparts. There s a wide range of electronic percussion too, plus deep editing tools for personalizing every sound. Players can easily change out and tune drums, add damping, change the ambient environment, and use individual EQs and transient editors to shape sounds to studio-level perfection. The TD-07KV is outfitted with Roland s legendary double-ply, tension-adjustable mesh drumheads for snare and toms, giving players the most accurate playing feel and sensing available. The PDX-8 8-inch snare pad features independent head and rim zones for assigning different sounds, while three PDX-6A 6-inch tom pads offer single-zone triggering. The kit also includes CY-8 12-inch pads for crash and ride, a 10-inch hi-hat with integrated pedal, and a KD-10 kick pad. Built with strong materials and quality components, the TD-07KV s hardware delivers the rock-solid stability and lasting durability that V-Drums are famous for. The custom drum stand provides a firm, steady foundation, while precision clamps tightly hold all components in place. One of the main advantages of choosing electronic drums for home playing is that they re much quieter than acoustic drums. Backed by decades of RandD, the TD-07KV is purpose-designed to be much quieter than other e-kits without sacrificing feel. Mesh heads minimize pad noise, while special damping in the kick pad reduces noise and vibration. Even the stand components are designed to reduce vibration and noise transfer, and Roland offers a range of optional Noise Eater accessories for further reduction if needed. The TD-07KV makes it easy to have fun and be more productive by drumming along with lessons and favorite tracks. With onboard Bluetooth, users can call up tracks on a smartphone, tablet, or computer and wirelessly hear the audio through the module alongside the drums. MIDI transmission over Bluetooth is also supported, allowing users to record MIDI data in music apps cable-free. A huge benefit of electronic drums is direct communication with modern music production software. Via USB, users can record discrete audio and MIDI drum tracks in any Mac/Windows DAW, or trigger sounds in software-based drum instruments for studio or live playing.

SPECIFICATIONS : Roland TD-07KV: V-Drums Kit -Kit configuration Kick: KD-10 Snare: PDX-8 Hi-hat: CY-5 Hi-hat control pedal: Detactable for half-open stroke Tom: PDX-6A x 3 *2 Crash: CY-8 Ride: CY-8 Drum stand: Four-post type rack stand BUNDLE : - Bass drum pedal - Drum throne - Headphone - Drumsticks - Drum kits 50 (Preset: over 20) -Instruments 143 -Effect Types Pad Equalizer: each pad Overhead Mic Simulator Room Multi-Effects: 1 system, 30 types - Coach functions (5 modes) Time check (easy) Time check (hard) Quiet count Auto up/down Change-up - Metronome Tempo (20--260) Rhythm type (5 types) Sounds (15 types) -Bluetooth Supported standards: Bluetooth Ver 4.2 Supported profile: A2DP (Audio), GATT (MIDI over Bluetooth Low Energy) Codec: SBC (Support to the content protection of the SCMS-T method) - Display 16 characters x 2 lines LCD (with backlight) - Connectors OUTPUT/PHONES jack: Stereo miniature phone type MIX IN jack: Stereo miniature phone type USB COMPUTER port: USB B type TRIGGER INPUT connector: DB-25 type (Kick, Snare, Tom 1, Tom 2, Tom 3, Hi-hat, Crash 1, Crash 2, Ride, Hi-hat control) -USB COMPUTER Speed: Hi-speed USB Driver mode: Generic, Vender Protocol: USB MIDI, USB Audio *3 -USB Audio Sampling Rate (original): 44.1 kHz Sampling Rate (with sampling rate converter): 96 kHz, 48 kHz Record: 2 channels Playback: 2 channels -Power supply AC adaptor (DC 12 V) - Current draw 250 mA -Dimensions 1,230 (W) x 1,100 (D) x 1,200 (H) mm 48-3/7 (W) x 43-5/16 (D) x 47-1/4 (H) inches (including sound module, kick pad, kick pedal and drum throne) -Weight 21.7 kg / 47 lbs 14 oz - Accessories Setup Guide Owner's Manual Leaflet USING THE UNIT SAFELY AC adaptor Special connection cable Roland introduces the TD-07KV V-Drums, a compact and affordable new drum set added to the acclaimed V-Drums family. Over two-plus decades, V-Drums have established a well-earned reputation as the most realistic, best playing, and best sounding electronic drums available. The TD-07KV carries on this proud legacy to provide the finest electronic drumming experience in its class, offering authentic Roland mesh-head snare and tom pads, large V-Cymbals, premium drum sounds, Bluetooth and USB connectivity, and much more. At the heart of the TD-07KV is the powerful TD-07 sound module. It s filled with acoustic drums and percussion captured in precise detail in pro studios, brought to life with advanced V-Drums technologies that make them behave just like their acoustic counterparts. There s a wide range of electronic percussion too, plus deep editing tools for personalizing every sound. Players can easily change out and tune drums, add damping, change the ambient environment, and use individual EQs and transient editors to shape sounds to studio-level perfection. The TD-07KV is outfitted with Roland s legendary double-ply, tension-adjustable mesh drumheads for snare and toms, giving players the most accurate playing feel and sensing available. The PDX-8 8-inch snare pad features independent head and rim zones for assigning different sounds, while three PDX-6A 6-inch tom pads offer single-zone triggering. The kit also includes CY-8 12-inch pads for crash and ride, a 10-inch hi-hat with integrated pedal, and a KD-10 kick pad. Built with strong materials and quality components, the TD-07KV s hardware delivers the rock-solid stability and lasting durability that V-Drums are famous for. The custom drum stand provides a firm, steady foundation, while precision clamps tightly hold all components in place. One of the main advantages of choosing electronic drums for home playing is that they re much quieter than acoustic drums. Backed by decades of RandD, the TD-07KV is purpose-designed to be much quieter than other e-kits without sacrificing feel. Mesh heads minimize pad noise, while special damping in the kick pad reduces noise and vibration. Even the stand components are designed to reduce vibration and noise transfer, and Roland offers a range of optional Noise Eater accessories for further reduction if needed. The TD-07KV makes it easy to have fun and be more productive by drumming along with lessons and favorite tracks. With onboard Bluetooth, users can call up tracks on a smartphone, tablet, or computer and wirelessly hear the audio through the module alongside the drums. MIDI transmission over Bluetooth is also supported, allowing users to record MIDI data in music apps cable-free. A huge benefit of electronic drums is direct communication with modern music production software. Via USB, users can record discrete audio and MIDI drum tracks in any Mac/Windows DAW, or trigger sounds in software-based drum instruments for studio or live playing.

Roland RSH-10 Drums Smartphone Holder; Mobile phone holder for Roland V-Drums; Spring-loaded, padded clamping device; Strong magnetic attachment; Two ball joints for free alignment: Durable clamp with wide adjustment range for different tube diameters; Flexible design for easy positioning

The Roland GR-55 is a revolution in guitar synthesis, with features never before available in any guitar processor. In terms of speed, it s the fastest ever. It s also the most accurate, thanks to newly developed pitch-detection technology. As for sound, the triple-core generator houses a world-class array of virtual guitars, basses, amps, and synth voices, enabling tones and textures that have never been heard before. Onstage or in the studio, you can instantly access the GR-55 s huge library of ready-to-use sounds, from pop to rock and beyond, with quick-access category buttons. Welcome to a groundbreaking new era in guitar synthesis! * A revolutionary fusion of guitar synthesis and powerful COSM guitar modeling * Up to four sound sources at a time: two PCM synth tones, plus COSM guitar modeling and normal guitar input * Easy to use and easy to play with hundreds of great, ready-to-use sounds for rock or pop guitarists * Advanced Roland technology provides superb sound quality and lightning-fast processing * Over 900 of Roland s latest fully editable PCM sounds, including pianos, organs, strings, vintage synths, and much more * COSM guitar and amp modeling * Two types of multi-effects engines, plus global reverb, chorus, and delay effects, and an onboard looper * Built-in USB audio player with foot control * GR-55GK is sold with GK-3 pickup inluded New Sound Possibilities The GR-55 s powerful triple-core engine comprises two PCM synthesizers (with over 900 tones powered by the latest Roland synthesis technology) and COSM guitar modeling, featuring a virtual treasure trove of guitar, bass, amp, and synth models. Together, these combined technologies allow you to create unique, revolutionary sounds. The Metal Synth Lead preset, for example, combines two types of thick, brilliant synth textures with an overdriven solid-body/humbucking tone for incredible punch and power. Lightning-Fast Tracking Thanks to Roland s decades of research and dedication to guitar synthesizers and powerful new pitch detection technology, the GR-55 is far and away the fastest guitar synth ever. Furthermore, the COSM guitar-modeling engine needs zero detection time, allowing the GR-55 to respond instantly and exactly as you play. The GR-55 detects pitch, velocity, and behavior for unprecedented response to your performance. Instant Gratification Get ready to rock ... and fast! The GR-55 puts you instantly in touch with a huge library of amazing sounds, no editing required. The onboard lineup of ready-to-use presets (270, plus 297 user) takes the pain out of the process, with simple category buttons for finding the perfect sound fast. Choose from hundreds of great presets for pop, rock, and beyond, and kick-start your song or jam with unique, powerful sounds that will turn heads and raise fists. Easy to Use If you re new to the world of technology, fear not. The GR-55 is powerful yet extremely friendly. For customizing sounds, the EZ Edit feature (made famous in the GT-10) and large LCD takes the guesswork out of the process. And for those who want to go deep, the GR-55 offers huge array of controllable parameters. Pros will appreciate the power of the GR-55 while beginners will love how quick and easy the unit is to operate. USB Connectivity The GR-55 conveniently bridges the guitarist to the desktop music production world with its two USB ports. The rear-panel port can be used one for MIDI/Audio data communication; the side-panel port is dedicated to real-time playback of audio files from a USB memory device (sold separately). The GR-55 provides foot control of USB audio playback so your hands never need to leave the guitar. * Sound Generator PCM: 2 tones, Modeling: 1 tone * Tones PCM: 910 types, Modeling: 23 types (guitar mode), 17 types (bass mode) * Effects MFX (Multi-Effects): 20 types, AMP (Preamp): 42 types, MOD (Modulation): 14 types, DELAY: 7 types, REVERB: 5 types, CHORUS: 4 types, EQ: 1 type * Patch Memory Guitar mode: Preset: 270 User: 297, Bass mode: Preset: 90 User: 297 * AD Conversion: 24-bit (GK Pickup), 24-bit AF method (Normal Pickup) * AF method (Adaptive Focus method) / This is a proprietary method from Roland and BOSS that vastly improves the signal-to-noise (S/N) ratio of the A/D and D/Aconverters. * DA Conversion: 24-bit * Sampling Frequency: 44.1 kHz * Nominal Output Level OUTPUT jacks: -10 dBu, GUITAR OUT jack: -10 dBu * Output Impedance: OUTPUT jacks: 2 k , GUITAR OUT jack: 2 k * USB Memory Audio Player File Format: WAV, AIFF * Display: Graphic LCD 240 x 64 dots * Connectors: GK IN connector (13-pin DIN type), GUITAR OUT jack (1/4-inch phone type), OUTPUT L/MONO, R jacks * (1/4-inch phone type), PHONES jack (Stereo 1/4-inch phone type), MIDI connectors (IN, OUT) (5-pin DIN type), USB COMPUTER connector (supports Hi-Speed USB, USB MIDI and USB Audio), USB MEMORY connector (supports Hi-Speed USB Flash Memory), DC IN jack * Power Supply: DC 9 V * Current Draw: 700 mA * Dimensions: 405 (W) x 244 (D) x 78 (H) mm / 16 (W) x 9-5/8 (D) x 3-1/8 (H) inches, Maximum height: 405 (W) x 244 (D) x 106 (H) mm / 16 (W) x 9-5/8 (D) x 4-3/16 (H) inches * Weight: 3.3 kg / 7 lbs 5 oz (excluding AC adaptor) * Included Accessories: AC adaptor, Owner s manual, Divided pickup (GK-3) (only for GK included model), GK cable (5 m) (only for GK included model) * Options: Divided pickup: GK-3 (for guitar), GK-3B (for bass guitar), GK cable: GKC-5 (5 m), GKC-10 (10 m), MIDI foot controller: FC-300, Unit selector: US-20 * 0 dBu = 0.775 Vrms * The specifications are subject to change without notice

TM-2: Trigger Module The Easy Way to Bring Hybrid Versatility to Your Acoustic Drum Set Battery powered and small in size, the TM-2 Trigger Module provides a simple solution for enhancing acoustic drums with the creative versatility of electronic percussion. Two trigger inputs support a wide variety of pads and drum triggers from Roland, while the ready-to-play pro sounds are optimized for augmenting live acoustic drums and extending the percussion capabilities of any drum set. Studio-quality multi-effects are on tap to process your kits, and you can even trigger your own custom WAV sounds, loops, and backing tracks via an SDHC card. By combining the TM-2 with products such as Roland s BT-1 Bar Trigger Pad, KT-10 Kick Trigger Pedal, or RT-series acoustic drum triggers, it s never been easier or more affordable to create a powerful hybrid drum kit that blends acoustic and electronic elements together. Compact trigger module for acoustic drummers looking to enhance their kits with electronic percussion Over 100 ready-to-play professional sounds, ranging from acoustic drums and percussion to modern electronic instruments Includes many sounds and tonal elements designed for layering with acoustic drums, providing enhanced, high-impact sounds for playing live drums through a PA system Suitable for all genres, from rock and metal to electronic music SDHC card slot lets users trigger their own WAV sounds stored on SDHC media, from one-shot samples and loop phrases to complete backing tracks Two trigger inputs that support both single- and dual-trigger pads Simple and intuitive user interface for creating and selecting kits Process kits with powerful effects such as reverb, flanger, delay, and more Compatible with Roland RT-series acoustic drum triggers and Roland percussion pads, including the BT-1 Bar Trigger Pad, KT-10 Kick Trigger Pedal, V-Pads, and V-Cymbals Powered by batteries or included AC adapter; runs for up to four hours on four AA-size batteries Included mounting plate allows the TM-2 to be attached to a hi-hat stand or drum rack with a standard multi-clamp MIDI I/O for triggering sounds in external sound modules, capturing MIDI data in music software, and playing the TM-2 from other devices A CONVENIENT AND AFFORDABLE WAY TO CREATE A POWERFUL HYBRID DRUM KIT With its ultra-compact size, simple operation, and very affordable price, the TM-2 gives you a hassle-free way to bring the power of Roland electronic percussion to your acoustic drum kit. It mounts quickly and unobtrusively onto a hi-hat stand or drum rack using standard hardware, while the convenience of battery-powered operation eliminates the need to bring AC power to your setup. The intuitive panel features straightforward controls for assigning sounds to the trigger inputs and saving them as kits, plus large, easy-to-press buttons for calling up kits as you perform. TRIGGER INPUTS FOR ROLAND PADS AND ACOUSTIC DRUM TRIGGERS The TM-2 is equipped with trigger inputs for connecting two pads or trigger devices at once. Nearly any pad in Roland s extensive V-Drums lineup can be used, including those that support dual triggering. When building a hybrid kit, ideal partners for the TM-2 include the BT-1 Bar Trigger Pad, which has a curved shape that mounts onto the rim of an acoustic drum, and the new KT-10 Kick Trigger Pedal, which features an innovative, all-in-one design and compact size that fits comfortably alongside other pedals in your kit. The TM-2 also works great with Roland s RT-series acoustic drum triggers that mount on kick, snare, and tom drums. READY-TO-PLAY PRO SOUNDS FOR ENHANCING ACOUSTIC DRUMS IN LIVE PERFORMANCES In top-level playing situations, professional drummers and sound engineers strive to create polished, high-impact sounds when amplifying live acoustic drums through a PA system. With the TM-2 and RT-series acoustic drum triggers, it s simple to achieve processed, concert-quality drum sounds wherever you play. The trigger module offers a wide range of acoustic sounds and tonal elements optimized for layering with acoustic drums, as well as a generous selection of electronic sounds for modern music styles. In addition, the TM-2 s traditional percussion instruments such as cowbell, wood block, wind chimes, and others are perfect for extending the capabilities of any acoustic kit with a compact device such as the BT-1 Bar Trigger Pad. USER SOUND EXPANSION VIA SDHC CARDS It s easy to use your own sounds with the TM-2, such as studio-processed drums from song recordings, sound effects, looped grooves, or even complete backing tracks. Just copy WAV audio files from your computer onto an SDHC card, and then insert it into the trigger module s card slot that s it! You can use your own sounds right alongside the internal sounds as you build kits, which you can also process with the TM-2 s great onboard multi-effects. EXPAND YOUR CREATIVE POSSIBILITIES WITH MIDI MIDI I/O in the TM-2 allows you to greatly expand your electronic percussion setup with external devices. You can trigger sounds in V-Drums modules, keyboards, and synth modules, and connect to a computer via a MIDI interface to record MIDI data and play sounds in popular music software. It s also possible to play the TM-2 s sounds both internal sounds and WAV sounds stored on an SDHC card from an external MIDI device.

TM-2: Trigger Module The Easy Way to Bring Hybrid Versatility to Your Acoustic Drum Set Battery powered and small in size, the TM-2 Trigger Module provides a simple solution for enhancing acoustic drums with the creative versatility of electronic percussion. Two trigger inputs support a wide variety of pads and drum triggers from Roland, while the ready-to-play pro sounds are optimized for augmenting live acoustic drums and extending the percussion capabilities of any drum set. Studio-quality multi-effects are on tap to process your kits, and you can even trigger your own custom WAV sounds, loops, and backing tracks via an SDHC card. By combining the TM-2 with products such as Roland s BT-1 Bar Trigger Pad, KT-10 Kick Trigger Pedal, or RT-series acoustic drum triggers, it s never been easier or more affordable to create a powerful hybrid drum kit that blends acoustic and electronic elements together. Compact trigger module for acoustic drummers looking to enhance their kits with electronic percussion Over 100 ready-to-play professional sounds, ranging from acoustic drums and percussion to modern electronic instruments Includes many sounds and tonal elements designed for layering with acoustic drums, providing enhanced, high-impact sounds for playing live drums through a PA system Suitable for all genres, from rock and metal to electronic music SDHC card slot lets users trigger their own WAV sounds stored on SDHC media, from one-shot samples and loop phrases to complete backing tracks Two trigger inputs that support both single- and dual-trigger pads Simple and intuitive user interface for creating and selecting kits Process kits with powerful effects such as reverb, flanger, delay, and more Compatible with Roland RT-series acoustic drum triggers and Roland percussion pads, including the BT-1 Bar Trigger Pad, KT-10 Kick Trigger Pedal, V-Pads, and V-Cymbals Powered by batteries or included AC adapter; runs for up to four hours on four AA-size batteries Included mounting plate allows the TM-2 to be attached to a hi-hat stand or drum rack with a standard multi-clamp MIDI I/O for triggering sounds in external sound modules, capturing MIDI data in music software, and playing the TM-2 from other devices A CONVENIENT AND AFFORDABLE WAY TO CREATE A POWERFUL HYBRID DRUM KIT With its ultra-compact size, simple operation, and very affordable price, the TM-2 gives you a hassle-free way to bring the power of Roland electronic percussion to your acoustic drum kit. It mounts quickly and unobtrusively onto a hi-hat stand or drum rack using standard hardware, while the convenience of battery-powered operation eliminates the need to bring AC power to your setup. The intuitive panel features straightforward controls for assigning sounds to the trigger inputs and saving them as kits, plus large, easy-to-press buttons for calling up kits as you perform. TRIGGER INPUTS FOR ROLAND PADS AND ACOUSTIC DRUM TRIGGERS The TM-2 is equipped with trigger inputs for connecting two pads or trigger devices at once. Nearly any pad in Roland s extensive V-Drums lineup can be used, including those that support dual triggering. When building a hybrid kit, ideal partners for the TM-2 include the BT-1 Bar Trigger Pad, which has a curved shape that mounts onto the rim of an acoustic drum, and the new KT-10 Kick Trigger Pedal, which features an innovative, all-in-one design and compact size that fits comfortably alongside other pedals in your kit. The TM-2 also works great with Roland s RT-series acoustic drum triggers that mount on kick, snare, and tom drums. READY-TO-PLAY PRO SOUNDS FOR ENHANCING ACOUSTIC DRUMS IN LIVE PERFORMANCES In top-level playing situations, professional drummers and sound engineers strive to create polished, high-impact sounds when amplifying live acoustic drums through a PA system. With the TM-2 and RT-series acoustic drum triggers, it s simple to achieve processed, concert-quality drum sounds wherever you play. The trigger module offers a wide range of acoustic sounds and tonal elements optimized for layering with acoustic drums, as well as a generous selection of electronic sounds for modern music styles. In addition, the TM-2 s traditional percussion instruments such as cowbell, wood block, wind chimes, and others are perfect for extending the capabilities of any acoustic kit with a compact device such as the BT-1 Bar Trigger Pad. USER SOUND EXPANSION VIA SDHC CARDS It s easy to use your own sounds with the TM-2, such as studio-processed drums from song recordings, sound effects, looped grooves, or even complete backing tracks. Just copy WAV audio files from your computer onto an SDHC card, and then insert it into the trigger module s card slot that s it! You can use your own sounds right alongside the internal sounds as you build kits, which you can also process with the TM-2 s great onboard multi-effects. EXPAND YOUR CREATIVE POSSIBILITIES WITH MIDI MIDI I/O in the TM-2 allows you to greatly expand your electronic percussion setup with external devices. You can trigger sounds in V-Drums modules, keyboards, and synth modules, and connect to a computer via a MIDI interface to record MIDI data and play sounds in popular music software. It s also possible to play the TM-2 s sounds both internal sounds and WAV sounds stored on an SDHC card from an external MIDI device.

Blues Cube Stage: Guitar Amplifier Authentic Tube Tone for Top Players The reinvented Blues Cube series launches the classic 1x12 combo amp into a new era, combining genuine tube sound and response with modern reliability and easy portability. Going far beyond modelling, Roland s Tube Logic design philosophy starts with carefully reproducing the inner workings of the revered tweed-era tube amp in every way, from guitar input to speaker output. Versatile clean and crunch channels can be used independently or combined for a complex range of tones, while variable output power modes let you dial in burning, full-throttle sound at any volume. Road-tested and fine-tuned with feedback from top players, the gig-ready Blues Cube delivers the sweet, magical tone and satisfying feel that makes a great guitar amp a highly expressive musical instrument. Performance-ready 60-watt combo guitar amplifier with authentic tube tone and touch response Roland s comprehensive Tube Logic design delivers the interactive tonal behaviours of famous fine-tuned vintage tube amps, including preamp and output tube distortion characteristics, power supply compression, and much more Independent Clean and Crunch channels, plus unique Dual Tone mode for blending channels to expand tonal possibilities Master volume and three-band EQ, plus Boost and Tone switches on each channel Four-way Power Control (0.5 W, 15 W, 45 W, Max) allows for cranked-amp tones at any volume Onboard high-quality reverb Classic open-back design with custom 12-inch speaker and poplar cabinet for enhanced presence on stage Stylish, modern look with a vintage vibe Efficient, lightweight design provides easy portability without sacrificing tone quality USB output for high-quality direct recording to a computer Channel selection and Dual Tone can be controlled with optional footswitches MUSICAL, HIGHLY RESPONSIVE AMP TONES WITH TUBE LOGIC Warm, bouncy, responsive, dynamic, elastic...these are all terms that guitarists use to describe the satisfying experience of playing their favourite tube amps. Thanks to Roland s Tube Logic, these words can be applied to the Blues Cube Stage as well. Dramatically evolved from the first-generation sound of the original Blues Cube amps from the 90s, today s Tube Logic accurately provides the complex, highly interactive behaviour of classic tube designs in meticulous detail, providing the magical it factor that takes a guitar amp from a simple sound system to a living, breathing musical instrument. Great feel, distortion control with touch and volume, bloom, sparkle, power supply sag, and more everything that players love about a finely tuned vintage tube amp is present in abundance with the Blues Cube. PERFORMANCE-READY AMP FOR PRO PLAYERS Ready for live playing, the Blues Cube Stage is equipped with 60 watts of power, plus a custom 12-inch speaker that s been specially designed for maximum tonal response with Tube Logic. The open-back cabinet features poplar plywood construction, which offers acoustically vibrant tone for solo or group performances. CLEAN, CRUNCH, AND DUAL TONE The Blues Cube Stage has two independent channels one voiced for cleaner tones, and the other for crunch. Each channel has its own Boost and Tone switches to shape the character. The Clean channel s single volume control dials in natural tube fullness and bite as the volume is cranked, while the Crunch channel s variable gain control provides a range of grit flavours from mild to aggressive. With the press of a switch, the unique Dual Tone mode lets you blend both channels together for an endless array of rich tones. And just like a vintage tube amp, the Blues Cube loves stompboxes, allowing you to further shape your personal sound by hitting the amp s front end with your favourite gain pedals. WIDE-OPEN SOUND AT ANY VOLUME Every tube-amp player knows that you really need to turn up the volume and push the output tubes to get the amp to sing at its best. The downside is that the sound simply becomes too loud for playing anywhere but the biggest stages though that s certainly never stopped guitarists from trying! With Tube Logic, the Blues Cube authentically delivers the complex distortion characteristics of output tubes and their interaction with the output transformer, with the sound getting richer and the feel becoming more dynamically responsive as the overall volume is increased. But with the Blues Cube s variable Power Control, you re able to enjoy this musical, cranked-up tone while matching the volume to any situation, from recording to rehearsals to nightclub gigs and beyond. MAINTENANCE-FREE AND EASY ON YOUR BACK With its modern approach, the Blues Cube eliminates the big drawbacks found in all tube amps powerful enough for stage playing they re extremely heavy, prone to damage through vibration, and require frequent tube replacement and other costly maintenance to keep them going strong. In contrast, the Blues Cube is basically maintenance-free, and has been carefully designed to reduce weight in every area that doesn t affect the tone. With the Blues Cube, you re able to enjoy great tube sound at every gig, but with much easier load-in and no actual tubes to worry about! REVERB, FOOT CONTROL, AND DIRECT RECORDING VIA USB The Blues Cube Stage features onboard reverb, and the rear panel is equipped with a footswitch jack for remote switching of channel selection and Dual Tone mode. And with the USB jack, it s simple to capture the Blues Cube s rich tones directly into your favorite computer recording applications. SPECIFICATIONS Rated Power Output 60 W Nominal Input Level INPUT HIGH: -10 dBu (1 M ohm) INPUT LOW: 0 dBu Speaker 30 cm (12 inches) x 1 Controls POWER switch DUAL TONE switch CH SELECT switch [CLEAN channel] BOOST button TONE button VOLUME knob [CRUNCH channel] BOOST button TONE button GAIN knob VOLUME knob [EQUALIZER] BASS knob MIDDLE knob TREBLE knob [EFFECT] REVERB knob MASTER knob POWER CONTROL switch Indicators CLEAN CHANNEL BOOST TONE CRUNCH CHANNEL BOOST TONE POWER Connectors INPUT HIGH/LOW jack: 1/4-inch phone type LINE OUT jack: 1/4-inch phone type PHONES jack: Stereo 1/4-inch phone type FOOT SW (TIP: CH SELECT, RING: DUAL TONE) jack: 1/4-inch TRS phone type REC OUT: USB type B AC IN jack Accessories Owner's manual Power cord Options (sold separately) Footswitch (BOSS FS-5L, BOSS FS-6) SIZE AND WEIGHT Width 513 mm 20-1/4 inches Depth 244 mm 9-10/16 inches Height 465 mm 18-5/16 inches Weight 14 kg 30 lbs. 14 oz. * 0 dBu = 0.775 Vrms

Blues Cube Artist: Guitar Amplifier Authentic Tube Tone for Top Players The reinvented Blues Cube series launches the classic 1x12 combo amp into a new era, combining genuine tube sound and response with modern reliability and easy portability. Going far beyond modelling, Roland s Tube Logic design philosophy starts with carefully reproducing the inner workings of the revered tweed-era tube amp in every way, from guitar input to speaker output. Versatile clean and crunch channels can be used independently or combined for a complex range of tones, while variable output power modes let you dial in burning, full-throttle sound at any volume. Road-tested and fine-tuned with feedback from top players, the gig-ready Blues Cube delivers the sweet, magical tone and satisfying feel that makes a great guitar amp a highly expressive musical instrument. Performance-ready 80-watt combo guitar amplifier with authentic tube tone and touch response Roland s comprehensive Tube Logic design delivers the interactive tonal behaviours of famous fine-tuned vintage tube amps, including preamp and output tube distortion characteristics, power supply compression, and much more Independent Clean and Crunch channels, plus unique Dual Tone mode for blending channels to expand tonal possibilities. Master volume, three-band EQ, and Presence control, plus Boost and Tone switches on each channel Four-way Power Control (0.5 W, 15 W, 45 W, Max) allows for cranked-amp tones at any volume Onboard high-quality reverb and tremolo effects with vintage sound character, plus effects loop for external devices Classic open-back design with custom 12-inch speaker and poplar cabinet for enhanced presence on stage Stylish, modern look with a vintage vibe Efficient, lightweight design provides easy portability without sacrificing tone quality USB output for high-quality direct recording to a computer Optional GA-FC Foot Controller for Channel Select, Dual Tone, and Tremolo/EFX Loop MUSICAL, HIGHLY RESPONSIVE AMP TONES WITH TUBE LOGIC Warm, bouncy, responsive, dynamic, elastic...these are all terms that guitarists use to describe the satisfying experience of playing their favourite tube amps. Thanks to Roland s Tube Logic, these words can be applied to the Blues Cube Artist as well. Dramatically evolved from the first-generation sound of the original Blues Cube amps from the 90s, today s Tube Logic accurately provides the complex, highly interactive behaviour of classic tube designs in meticulous detail, providing the magical it factor that takes a guitar amp from a simple sound system to a living, breathing musical instrument. Great feel, distortion control with touch and volume, bloom, sparkle, power supply sag, and more everything that players love about a finely tuned vintage tube amp is present in abundance with the Blues Cube. PERFORMANCE-READY AMP FOR PRO PLAYERS Ready for live playing, the Blues Cube Artist is equipped with 80-watts of power, plus a custom 12-inch speaker that s been specially designed for maximum tonal response with Tube Logic. The open-back cabinet features poplar plywood construction, which offers acoustically vibrant tone for solo or group performances. CLEAN, CRUNCH, AND DUAL TONE The Blues Cube Artist has two independent channels one voiced for cleaner tones, and the other for crunch. Each channel has its own Boost and Tone switches to shape the character. The Clean channel s single volume control dials in natural tube fullness and bite as the volume is cranked, while the Crunch channel s variable gain control provides a range of grit flavours from mild to aggressive. With the press of a switch, the unique Dual Tone mode lets you blend both channels together for an endless array of rich tones. And just like a vintage tube amp, the Blues Cube loves stompboxes, allowing you to further shape your personal sound by hitting the amp s front end with your favourite gain pedals. WIDE-OPEN SOUND AT ANY VOLUME Every tube-amp player knows that you really need to turn up the volume and push the output tubes to get the amp to sing at its best. The downside is that the sound simply becomes too loud for playing anywhere but the biggest stages though that s certainly never stopped guitarists from trying! With Tube Logic, the Blues Cube authentically delivers the complex distortion characteristics of output tubes and their interaction with the output transformer, with the sound getting richer and the feel becoming more dynamically responsive as the overall volume is increased. But with the Blues Cube s variable Power Control, you re able to enjoy this musical, cranked-up tone while matching the volume to any situation, from recording to rehearsals to nightclub gigs and beyond. MAINTENANCE-FREE AND EASY ON YOUR BACK With its modern approach, the Blues Cube eliminates two of the big drawbacks found in all tube amps powerful enough for stage playing they re extremely heavy, prone to vibration damage, and they require frequent tube replacement and other costly maintenance to keep them going strong. In contrast, the Blues Cube is basically maintenance-free, and has been carefully designed to reduce weight in every area that doesn t affect the tone. With the Blues Cube, you re able to enjoy great tube sound at every gig, but with much easier load-in and no actual tubes to worry about! EFFECTS, FOOT CONTROL, AND DIRECT RECORDING VIA USB The Blues Cube Artist features onboard reverb and tremolo, plus an effects loop for patching in any external effect that you like. The rear panel has jacks for connecting an optional footswitch such as the GA-FC Foot Controller, which provides remote switching for channel selection, Dual Tone mode, and on/off for the built-in effects and effects loop. And with the USB jack, it s simple to capture the Blues Cube Artist s rich tones directly into your favourite computer recording applications. SPECIFICATIONS Rated Power Output 80 W Nominal Input Level INPUT HIGH: -10 dBu (1 M ohm) INPUT LOW: 0 dBu EFX LOOP RETURN:-10 dBu Speaker 30 cm (12 inches) x 1 Controls POWER switch DUAL TONE switch CH SELECT switch [CLEAN channel] BOOST button TONE button VOLUME knob [CRUNCH channel] BOOST button TONE button GAIN knob VOLUME knob [EQUALIZER] BASS knob MIDDLE knob TREBLE knob [EFFECT] TAP button EFX LOOP button TREMOLO knob REVERB knob PRESENCE knob MASTER knob POWER CONTROL switch Indicators CLEAN CHANNEL BOOST TONE CRUNCH CHANNEL BOOST TONE TAP EFFECT POWER Connectors INPUT HIGH/LOW jack: 1/4-inch phone type LINE OUT jack: 1/4-inch phone type PHONES jack: Stereo 1/4-inch phone type FOOT SW (TIP: TREMOLO, RING: EFX LOOP) jack: 1/4-inch TRS phone type FOOT SW (TIP: CH SELECT, RING: DUAL TONE) jack: 1/4-inch TRS phone type FOOT SW (GA-FC): 1/4-inch TRS phone type EFX LOOP SEND jack: 1/4-inch phone type EFX LOOP RETURN jack: 1/4-inch phone type REC OUT: USB type B AC IN jack Accessories Owner s manual Power cord Options (sold separately) Footswitch (BOSS FS-5L, BOSS FS-6) GA Foot Controller (GA-FC) SIZE AND WEIGHT Width 592 mm 23-5/16 inches Depth 260 mm 10-1/4 inches Height 485 mm 19-1/8 inches Weight 16 kg 35 lbs. 5 oz. * 0 dBu = 0.775 Vrms

HYBRID DRUMMING BEGINS HERE No two drummers are the same, and every player has their own distinctive style. Getting a sound that you re happy with, not to mention having the right sound for the gig, is vital. But it can be expensive and time consuming trying to find out what works. Enter the TM-1 a unique trigger module that makes it easy to add more sounds to your acoustic drum kit. And those sounds can be anything you like, from the TM-1 s onboard kick, snare, tom, cymbal, and percussion samples to your own samples and loops. Just connect any compatible Roland trigger pad to the TM-1 and directly play the sounds you need, or mount an RT-series trigger to one of your acoustic drums and play with your preferred sample layered on top in perfect sync, with no lag whatsoever. Getting your own custom sounds into the TM-1 is a breeze, thanks to the free editor app for Mac/Windows and iOS/Android.* Simply connect the TM-1 to your device, open the app, import samples from your library, and tweak the settings as needed. When it comes to performing on stage, the battery- or mains-powered TM-1 can be easily controlled with your foot via built-in switches. It s even possible to mute the hybrid sound with a foot press, letting you go all-acoustic in the verses before bringing in some extra hybrid power for the chorus. Every working drummer can benefit from a hybrid setup these days, and the TM-1 is the easiest and most affordable place to start. - The easiest way to get started with the power of hybrid drums - Simple and intuitive to use, with direct controls for all trigger functions - Small size, battery operation, and sturdy floor-based design integrates easily with your regular drum set - Two built-in footswitches for triggering sounds, changing kits, and muting the module - Suitable for any music style, from rock and metal to electronic music and beyond - 15 ready-to-play onboard kits and nearly unlimited sound customization via a convenient editor app - Free TM-1 Editor (Mac/Windows, iOS/Android) provides access to over 150 additional sounds, plus user sample import and much more - Compatible with Roland RT-series acoustic drum triggers and a wide variety of Roland trigger pads - Connect up to two pads or triggers (two single-trigger devices or one dual-trigger device) - Also works as a trigger-to-MIDI convertor when connected to a computer - USB for editor communication and trigger-to-MIDI conversion Specs : Kits : 15 Preloaded Sounds : 30 Number of User Sample : 30 Sound Length : Approx. 6 second/Sample Data Format : - Mac OSX: - WAV, AIFF, MP3, AAC, Apple Lossless Windows: - WAV (44.1 kHz, 16/24 bits) iOS: - WAV, AIFF, MP3, AAC, Apple Lossless Android: - WAV (44.1 kHz, 16 bits), MP3 - *The Application TM-1 Editor is required. Display : - 7 segments, 1 character (LED) Controls : - [SENS] knob (TRIG1, TRIG2) - [PITCH] knob (TRIG1, TRIG2) - [DECAY] knob (TRIG1, TRIG2) - [LEVEL] knob (TRIG1, TRIG2) - [MODE SELECT] button - [MUTE] switch - [KIT SHIFT] switch - [POWER] switch Indicator : - Trigger Indicator (TRIG1, TRIG2) Connectors : - TRIGGER IN jack : 1/4-inch phone type, mono - OUTPUT jack : Stereo 1/4-inch phone type *When setting the Output Setting to the MIX, The mixed sound of trigger 1 and 2 is output in mono. *When setting the Output Setting to the INDIVIDUAL, Each trigger is output separately to left and right (TRIG1: L-Side, TRIG2: R-Side).PHONES jack: Stereo 1/4-inch phone type - USB port : USB type B - DC IN jack USB : - MIDI Power Supply : - Alkaline battery (9 V, 6LR61) - AC adaptor (DC 9 V, sold separately) - Supplied from the computer via USB port Current Draw : - 100 mA (DC IN) - 250 mA (USB) Expected battery life under continuous use : Approx. 3 hours *It depends on the batteries' specification, capacity, and conditions of use. AccessoriesOwner's manual : - Leaflet USING THE UNIT SAFELY - Alkaline battery (9 V, 6LR61) - USB type B Cable Options (sold separately) : - AC adaptor (PSA-S series) - Acoustic Drum Trigger (RT series) - Pads (PD series, PDX series, BT-1) - Cymbals (CY series) - Kick (KD series) - Kick pedal (KT series) - Footswitch (DP series, BOSS FS-5U, FS-6, FS-7) - Stereo Split Cable (PCS-31L) - Personal Drum Monitor (PM series) SIZE AND WEIGHT - Width : 150 mm 5-15/16 inches - Depth : 95 mm 3-3/4 inches - Height : 60 mm 2-3/8 inches - Weight (including batteries) : 550 g 1 lb 4 oz The Simple Solution to Bring Hybrid Power to Your Acoustic Kit Hybrid drum setups are everywhere these days, from stadium concerts to small clubs and bars. Busy working drummers love the ability to bring studio-style impact to their core acoustic sounds and be able to cover the electronic percussion parts that are so essential to modern music styles. At first, creating a hybrid acoustic-electronic setup can seem daunting. But with the TM-1, it s easy for any player to start their hybrid journey. Just mount one or more Roland trigger devices within your setup, connect them to the TM-1, and access any sound you need. With dedicated controls for sensitivity, pitch, and more, there s no technical knowledge required for operation simply turn the knobs until the sound is right to you and start playing! Cover Any Gig with 15 Ready-to-Play Kits When playing on stage with just your acoustic kit, it s difficult or impossible to change your sound on the fly. But with a hybrid drum kit, changes can be made in an instant. Now you can play the sound of that unique drum you couldn t bring to the gig, or incorporate samples and loops to enhance and expand your main drum sound. Out of the box, the TM-1 has 15 ready-to-go kits with two instruments in each. The free editor app unlocks access to a library of over 150 additional sounds, including kick, snare, and other drums, and even synth loops. And with the ability to add your own sounds via the editor as well, the sonic possibilities are virtually endless. Whatever you want to achieve, changing your kit s sound during the set has never been easier. Editor App for Sample Import and Quick Sound Creation A hybrid drum setup lets you choose and customize the sounds for your entire setlist, so each song gets the perfect drum sound. With the TM-1 Editor, you re able to access all the module s internal sounds, import your own original samples, assign sounds to each trigger pad, and quickly customize them however you like. Samples up to six seconds long can be imported from your computer, tablet, smartphone, or even cloud storage. And you don t have to take your laptop to the gig to change up sounds at the last second just use your smartphone! Enhance Your Acoustic Drum Sounds with Roland RT-Series Triggers Your acoustic drum sound is king, but it can nearly always benefit from some sonic reinforcement at live gigs. The kick and snare are the backbone to a band s sound, but it can be a challenge to get them to cut through when playing with loud guitars, bass, and keys. By using Roland s RT-series acoustic triggers, you can layer samples from the TM-1 with your own kick and snare and amplify them together through the PA, providing increased punch, clarity, and depth that perfectly complements your core acoustic sound. For years, metal drummers have been enhancing their kick drums with electronic samples especially when playing fast double-kick phrases as it really helps cut through a dense mix. But this technique isn t just for speed players; every drummer can take advantage of these powerful hybrid benefits with the TM-1. Expand Your Percussion Palette with Roland Trigger Pads The TM-1 is also a great way to expand the variety of sounds available from your acoustic drum kit. By adding an electronic drum pad, you can perform with any sound assigned to it. There are two trigger inputs available, allowing you to connect two single-trigger pads or one dual-trigger pad. Most Roland drum pads work with the TM-1, including the compact BT-1 Bar Trigger Pad, KT-10 Kick Trigger Pedal, V-Pads, and V-Cymbals. It s even possible to connect BOSS footswitches like the FS-5U or FS-6 and use them as compact floor-based triggers. And don t forget that you can use the TM-1 s built-in footswitches to trigger sounds as well. Ultra-Portable and Built for the Road The TM-1 s compact size lets you take it wherever you want, and the stompbox-style design fits easily alongside your other floor-mounted gear. Better still, support for battery operation eliminates the hassle of finding AC power when you need to set up in a hurry or perform outdoors. The TM-1 is lightweight enough to throw into a bag or instrument case, and robust enough to travel thanks to its metal-body construction and rugged footswitches. Trigger-to-MIDI Conversion for Your Computer Whether you re producing at home, working in the studio, or performing live, you sometimes need to send a MIDI signal when you hit a pad. The TM-1 performs this trigger-to-MIDI conversion simply by connecting it to a computer via USB, allowing you to trigger sounds in drum samplers and plug-in instruments, record MIDI tracks in a DAW, or control clips and other functions in performance software like Ableton Live.

HYBRID DRUMMING BEGINS HERE No two drummers are the same, and every player has their own distinctive style. Getting a sound that you re happy with, not to mention having the right sound for the gig, is vital. But it can be expensive and time consuming trying to find out what works. Enter the TM-1 a unique trigger module that makes it easy to add more sounds to your acoustic drum kit. And those sounds can be anything you like, from the TM-1 s onboard kick, snare, tom, cymbal, and percussion samples to your own samples and loops. Just connect any compatible Roland trigger pad to the TM-1 and directly play the sounds you need, or mount an RT-series trigger to one of your acoustic drums and play with your preferred sample layered on top in perfect sync, with no lag whatsoever. Getting your own custom sounds into the TM-1 is a breeze, thanks to the free editor app for Mac/Windows and iOS/Android.* Simply connect the TM-1 to your device, open the app, import samples from your library, and tweak the settings as needed. When it comes to performing on stage, the battery- or mains-powered TM-1 can be easily controlled with your foot via built-in switches. It s even possible to mute the hybrid sound with a foot press, letting you go all-acoustic in the verses before bringing in some extra hybrid power for the chorus. Every working drummer can benefit from a hybrid setup these days, and the TM-1 is the easiest and most affordable place to start. - The easiest way to get started with the power of hybrid drums - Simple and intuitive to use, with direct controls for all trigger functions - Small size, battery operation, and sturdy floor-based design integrates easily with your regular drum set - Two built-in footswitches for triggering sounds, changing kits, and muting the module - Suitable for any music style, from rock and metal to electronic music and beyond - 15 ready-to-play onboard kits and nearly unlimited sound customization via a convenient editor app - Free TM-1 Editor (Mac/Windows, iOS/Android) provides access to over 150 additional sounds, plus user sample import and much more - Compatible with Roland RT-series acoustic drum triggers and a wide variety of Roland trigger pads - Connect up to two pads or triggers (two single-trigger devices or one dual-trigger device) - Also works as a trigger-to-MIDI convertor when connected to a computer - USB for editor communication and trigger-to-MIDI conversion Specs : Kits : 15 Preloaded Sounds : 30 Number of User Sample : 30 Sound Length : Approx. 6 second/Sample Data Format : - Mac OSX: - WAV, AIFF, MP3, AAC, Apple Lossless Windows: - WAV (44.1 kHz, 16/24 bits) iOS: - WAV, AIFF, MP3, AAC, Apple Lossless Android: - WAV (44.1 kHz, 16 bits), MP3 - *The Application TM-1 Editor is required. Display : - 7 segments, 1 character (LED) Controls : - [SENS] knob (TRIG1, TRIG2) - [PITCH] knob (TRIG1, TRIG2) - [DECAY] knob (TRIG1, TRIG2) - [LEVEL] knob (TRIG1, TRIG2) - [MODE SELECT] button - [MUTE] switch - [KIT SHIFT] switch - [POWER] switch Indicator : - Trigger Indicator (TRIG1, TRIG2) Connectors : - TRIGGER IN jack : 1/4-inch phone type, mono - OUTPUT jack : Stereo 1/4-inch phone type *When setting the Output Setting to the MIX, The mixed sound of trigger 1 and 2 is output in mono. *When setting the Output Setting to the INDIVIDUAL, Each trigger is output separately to left and right (TRIG1: L-Side, TRIG2: R-Side).PHONES jack: Stereo 1/4-inch phone type - USB port : USB type B - DC IN jack USB : - MIDI Power Supply : - Alkaline battery (9 V, 6LR61) - AC adaptor (DC 9 V, sold separately) - Supplied from the computer via USB port Current Draw : - 100 mA (DC IN) - 250 mA (USB) Expected battery life under continuous use : Approx. 3 hours *It depends on the batteries' specification, capacity, and conditions of use. AccessoriesOwner's manual : - Leaflet USING THE UNIT SAFELY - Alkaline battery (9 V, 6LR61) - USB type B Cable Options (sold separately) : - AC adaptor (PSA-S series) - Acoustic Drum Trigger (RT series) - Pads (PD series, PDX series, BT-1) - Cymbals (CY series) - Kick (KD series) - Kick pedal (KT series) - Footswitch (DP series, BOSS FS-5U, FS-6, FS-7) - Stereo Split Cable (PCS-31L) - Personal Drum Monitor (PM series) SIZE AND WEIGHT - Width : 150 mm 5-15/16 inches - Depth : 95 mm 3-3/4 inches - Height : 60 mm 2-3/8 inches - Weight (including batteries) : 550 g 1 lb 4 oz The Simple Solution to Bring Hybrid Power to Your Acoustic Kit Hybrid drum setups are everywhere these days, from stadium concerts to small clubs and bars. Busy working drummers love the ability to bring studio-style impact to their core acoustic sounds and be able to cover the electronic percussion parts that are so essential to modern music styles. At first, creating a hybrid acoustic-electronic setup can seem daunting. But with the TM-1, it s easy for any player to start their hybrid journey. Just mount one or more Roland trigger devices within your setup, connect them to the TM-1, and access any sound you need. With dedicated controls for sensitivity, pitch, and more, there s no technical knowledge required for operation simply turn the knobs until the sound is right to you and start playing! Cover Any Gig with 15 Ready-to-Play Kits When playing on stage with just your acoustic kit, it s difficult or impossible to change your sound on the fly. But with a hybrid drum kit, changes can be made in an instant. Now you can play the sound of that unique drum you couldn t bring to the gig, or incorporate samples and loops to enhance and expand your main drum sound. Out of the box, the TM-1 has 15 ready-to-go kits with two instruments in each. The free editor app unlocks access to a library of over 150 additional sounds, including kick, snare, and other drums, and even synth loops. And with the ability to add your own sounds via the editor as well, the sonic possibilities are virtually endless. Whatever you want to achieve, changing your kit s sound during the set has never been easier. Editor App for Sample Import and Quick Sound Creation A hybrid drum setup lets you choose and customize the sounds for your entire setlist, so each song gets the perfect drum sound. With the TM-1 Editor, you re able to access all the module s internal sounds, import your own original samples, assign sounds to each trigger pad, and quickly customize them however you like. Samples up to six seconds long can be imported from your computer, tablet, smartphone, or even cloud storage. And you don t have to take your laptop to the gig to change up sounds at the last second just use your smartphone! Enhance Your Acoustic Drum Sounds with Roland RT-Series Triggers Your acoustic drum sound is king, but it can nearly always benefit from some sonic reinforcement at live gigs. The kick and snare are the backbone to a band s sound, but it can be a challenge to get them to cut through when playing with loud guitars, bass, and keys. By using Roland s RT-series acoustic triggers, you can layer samples from the TM-1 with your own kick and snare and amplify them together through the PA, providing increased punch, clarity, and depth that perfectly complements your core acoustic sound. For years, metal drummers have been enhancing their kick drums with electronic samples especially when playing fast double-kick phrases as it really helps cut through a dense mix. But this technique isn t just for speed players; every drummer can take advantage of these powerful hybrid benefits with the TM-1. Expand Your Percussion Palette with Roland Trigger Pads The TM-1 is also a great way to expand the variety of sounds available from your acoustic drum kit. By adding an electronic drum pad, you can perform with any sound assigned to it. There are two trigger inputs available, allowing you to connect two single-trigger pads or one dual-trigger pad. Most Roland drum pads work with the TM-1, including the compact BT-1 Bar Trigger Pad, KT-10 Kick Trigger Pedal, V-Pads, and V-Cymbals. It s even possible to connect BOSS footswitches like the FS-5U or FS-6 and use them as compact floor-based triggers. And don t forget that you can use the TM-1 s built-in footswitches to trigger sounds as well. Ultra-Portable and Built for the Road The TM-1 s compact size lets you take it wherever you want, and the stompbox-style design fits easily alongside your other floor-mounted gear. Better still, support for battery operation eliminates the hassle of finding AC power when you need to set up in a hurry or perform outdoors. The TM-1 is lightweight enough to throw into a bag or instrument case, and robust enough to travel thanks to its metal-body construction and rugged footswitches. Trigger-to-MIDI Conversion for Your Computer Whether you re producing at home, working in the studio, or performing live, you sometimes need to send a MIDI signal when you hit a pad. The TM-1 performs this trigger-to-MIDI conversion simply by connecting it to a computer via USB, allowing you to trigger sounds in drum samplers and plug-in instruments, record MIDI tracks in a DAW, or control clips and other functions in performance software like Ableton Live.

Versatile Add-On Trigger Pad for V-Pads and Acoustic Drums The compact and affordable BT-1 Bar Trigger Pad makes it easy to add electronic triggering to any drum kit. With a curved shape that mounts on the side of a V-Drums V-Pad or acoustic drum, it provides convenient playing access without disturbing your existing kit layout. The BT-1 is great not only for playing sounds in a V-Drums module or SPD-series percussion pad, but also for convenient control of a variety of functions like start/stop of backing songs and phrase loops, and much more. - Compact and reliable single-trigger pad - Curved shape for mounting on a V-Pad or acoustic drum - Quick and easy mounting through a drum tension rod; attachment parts for standard rod-type mounts included - Internal design eliminates false triggering while playing surrounding drums and/or pads - Use with a V-Drums module or SPD-series percussion pad to trigger sounds and control functions such as start/stop of backing songs and phrase loops, effects on/off, kit selection, tap tempo, and more - Great way to add electronic triggering to any acoustic kit or additional triggering to a V-Drums set Additional Triggering for V-Drums Kits If you re a V-Drums player, the compact BT-1 makes it simple to incorporate additional triggers without having to add more pads. This gives you access to additional sounds, as well as convenient control of an enormous range of performance features in your V-Drums module or an SPD-series percussion pad. And with its small size, it s easy to add additional BT-1s as needed to continuously expand the expressive power of your Roland percussion rig. Easily Incorporate Electronics with Acoustic Drums The BT-1 is an easy and affordable way to integrate electronics with your acoustic kit. Unlike large round pads and inconvenient foot switches, the BT-1 blends seamlessly with your kit without adjusting your setup or playing style. Simply plug the BT-1 into a trigger input on a V-Drums module or SPD-series percussion pad and enjoy a universe of new possibilities that Roland electronic percussion brings.

Playing drums at home can be a headache. Traditional acoustic shells are impractical for late-night practice, while many electronic kits are disruptive (even with headphones), due to the sound of the pedals in operation. Roland s new FD-9 hi-hat controller pedal is the smart way to drive down decibels. Designed for ultra-quiet home practice, the unit s patent-pending link mechanism means dramatic noise reduction when the pedal is depressed. Expressive players will also appreciate this compact pedal s authentic hi-hat feel, with smooth transitions between open/closed/half-open positions. With the Roland FD-9, you can play as hard as you like, as late as you want. Low-noise operation for late-night practice (50% less noise in your practice space and 15% less to rooms below, compared to standard hi-hat pedal) Link mechanism allows ultra-quiet operation and authentic hi-hat control Compact design, easy setup and small footprint for home practice Use alongside other noise-reducing Roland products, including NE-10 Noise Eater Isolation Boards and NE-1 Isolation Feet, for quietest-ever performance Practice Whenever You Like With Ultra-Quiet Link Mechanism Even when you re drumming with headphones, the sound made each time you depress a standard hi-hat pedal is sure to disturb anyone near your practice space. The FD-9 is the solution, with a newly developed link mechanism* that gives a marked reduction in operational noise (50%** less in your practice space and 15%** less to rooms below, compared with a standard FD-8 Hi-Hat Controller). For drummers who really need to keep it down, the FD-9 works even better alongside the low-noise mesh heads featured on Roland V-Drums, ultra-quiet KT-9 Kick Trigger Pedal, plus our NE-10 Noise Eater Isolation Boards and NE-1 Isolation Feet. Compact All-In-One Design That Fits Into Your Setup The FD-9 is designed to make home practice as easy as possible. As well as being our quietest hi-hat pedal yet, the compact and lightweight unit is compatible with any V-Drums sound modules featuring ¼-inch trigger inputs. It s the ideal addition to your electronic kit and your ticket to professional performance in a practice scenario. Allows Advanced Techniques and Supports Your Drumming Style Whether you re practicing at home or playing out, it s important to have a hi-hat pedal that picks up all the subtleties of your drumming style. The FD-9 is a great choice for expressive players. The unit s feet ensure total stability, letting you work the pedal as hard or soft as you like (with the sound module picking up every nuance). The toe-stopper is a familiar touch carried over from acoustic pedals, while the FD-9 s smooth open/closed/half-open operation delivers authentic hi-hat feel. You can even pull off aggressive moves like hi-hat splashes without disturbing the neighbors. Create the Ultimate Percussion Setup with Connectivity to Roland Gear As your percussion setup evolves, you need a hi-hat pedal that can keep up. Designed for open-ended flexibility, the FD-9 is compatible with Roland s full range of electronic percussion gear, from the OCTAPAD SPD-30 to the HandSonic HPD-20. It s the compact, ultra-quiet hi-hat pedal that does it all. * Patent Pending ** Compared to a Roland FD-8 Kick Pad with Roland original measurement SPECIFICATIONS Accessories Owner's Manual Connection cable Option (sold separately)Noise eater (NE-10) SIZE AND WEIGHT Width: 139 mm - 5-1/2 inches Depth: 365 mm - 14-3/8 inches Height: 158 mm - 6-1/4 inches Weight: 2.0 kg - 4 lbs 7 oz

High-Quality Sound for Performers On the Go With its compact size and battery-powered operation, Roland s CUBE Street was a huge hit among traveling musicians. Now, the new CUBE Street EX infuses the popular mobile amp with a huge performance upgrade that delivers more projection, more channels, and more versatility. 50 big watts of power and a stereo speaker system with dual woofers and tweeters provide clean, punchy sound for larger crowds, while four independent channels offer abundant connections for a variety of mics and instruments. Detailed sound adjustment is available with separate EQ and reverb controls, and great guitar tones are dialed in easily with the onboard COSM® amps. Selectable power modes provide up to 20 hours of operation with eight AA batteries, and two CUBE Street EX units can be linked together for more sound coverage if needed. And with i-CUBE LINK, you can even plug in your iPhone or iPad to play backing music and record your performances! Innovative new Roland technology provides 50 watts of stereo power from eight AA-size batteries Selectable output power modes to optimize battery life for different performing situations (Max: 50 W/5 hours; Normal: 25 W/10 hours; Eco: 10 W/20 hours*) Portable, lightweight design (7.4 kg/16 lb. 5 oz.) with durable ABS injection-molded cabinet Powerful, full-range stereo sound with dual 8-inch woofers and 2-inch tweeters Four independent channels for connecting a variety of mics, instruments, and audio devices Two XLR mic inputs allow two vocalists to perform at once COSM tones for electric guitar, including Clean, Crunch, and Lead; preamp for acoustic guitar provides clean, natural sound Angled back for use as a stage monitor; mounting hole for use with optional ST-A95 Speaker Stand Stereo Line Out jacks for connecting to an external sound system when used as a stage monitor Stereo Link jacks to connect a second CUBE Street EX for broader sound coverage Easy recording into your iPhone/iPad via i-CUBE LINK and free CUBE JAM app Optional CB-CS2 Carrying Case made with water-repellent material *Approximate battery life under continuous use with rechargeable AA Ni-MH batteries IMPRESSIVE PERFORMANCE EQUIVALENT TO A SMALL PA SYSTEM Equipped with 50 watts of stereo power, two eight-inch woofers, and two tweeters, the compact CUBE Street EX effortlessly projects your musical performances with clear, dynamic sound. Thanks to unique new power circuitry developed by Roland, you can enjoy clean headroom and quality sound at a level that s impossible with any other battery-powered amp. The output power is adjustable in three levels Max (50 W), Normal (25 W), and Eco (10 W) allowing you to conserve battery life in situations where you don t need maximum power. In Eco mode, eight AA Ni-MH batteries will last up to 20 hours! The CUBE Street EX can also be powered with the included AC adapter at gigs where electrical power is readily available. MULTIPLE INPUTS TO SUPPORT ANY PERFORMING SETUP The CUBE Street EX has an onboard mixer with four independent channels, providing ample connectivity options for all kinds performers. Mic/Instrument and Mic/Guitar channels feature XLR/TRS combo jacks to support microphones or devices with 1/4-inch outputs, and each channel is outfitted with its own three-band EQ and reverb effect for discrete sound shaping. The mono/stereo Line In channel is equipped with 1/4-inch jacks, while the Audio In channel provides a stereo 1/8-inch mini jack that also supports i-CUBE LINK. If you fill up all the channels, you can use the rear-panel Aux In jack to connect an additional mono device if needed. The versatile CUBE Street EX is ideal for all kinds of musical performance situations. Here are just a few: Vocal, guitar, synthesizer, and electronic percussion Two vocalists, keyboard, and backing tracks Electric and acoustic guitar duo with drum machine Vocal, guitar, drum machine, and backing tracks GREAT GUITAR TONES WITH COSM® AMPS AND EFFECTS The CUBE Street EX makes it easy for guitarists to plug in and get pro sounds immediately. COSM tones for electric guitar include Lead, Crunch, and Clean, plus an Acoustic Simulator for extra versatility from a single axe. There s also an AC preamp optimized for acoustic/electric guitar and a convenient built-in tuner. Chorus/delay and reverb effects are available as well, and these can be turned on/off with optional footswitches while performing. JAM AND RECORD WITH I-CUBE LINK AND CUBE JAM Roland s innovative i-CUBE LINK interface lets you incorporate your iPhone, iPad, or iPod touch into your performances with the CUBE Street EX. i-CUBE LINK connects to your device s audio jack with the included cable, providing two-way communication with your favorite music apps. Roland s free CUBE JAM app is an ideal partner, allowing you to play along with music tracks from your iTunes library and record the CUBE Street EX s output right back into the app. CUBE JAM also includes a number of useful functions for practice, jamming, and performing, such as independent pitch/speed adjustment and Center Cancel for minus-one playing and karaoke. STAND MOUNTING AND SOUND EXPANSION When placed on the ground, the CUBE Street EX s angled back provides excellent monitoring for performing in street situations and on larger stages. If you need broader sound coverage for bigger crowds, the amp can be mounted on an optional ST-A95 Speaker Stand. With the handy Stereo Link function, two CUBE Street EX units can be used together to create a powerful stereo PA with up to eight separate inputs. LIGHT AND DURABLE DESIGN Like all amps in Roland s renowned CUBE series, the CUBE Street EX is built to last. It features a high-strength ABS injection-molded body that s passed rigorous durability testing, ensuring reliability in all kinds of outdoor performing situations. In addition to being tough, the CUBE Street EX is surprisingly light, making the amp a breeze to carry from gig to gig. An optional CB-CS2 Carrying Case provides a convenient shoulder strap and accessory pockets, plus a water-resistant covering that protects the amp from moisture while traveling. SPECS Maximum Power Output 50 W (25 W 25 W) Nominal Input Level (1 kHz) MIC/INSTRUMENT INPUT: -50/-10 dBu MIC/GUITAR INPUT: -10 dBu LINE IN: -10 dBu AUDIO IN (i-CUBE LINK): -10 dBu AUX IN/STEREO LINK IN: -10 dBu Nominal Output Level (1 kHz) LINE OUT (L/MONO, R)/STEREO LINK OUT (L, R): -10 dBu Speakers Woofer: 20 cm (8 inches) x 2 Tweeter: 5 cm (2 inches) x 2 Controls POWER switch BATTERY CHECK/MUTE button OUTPUT POWER switch (ECO, NORMAL, MAX) [MIC/INSTRUMENT] SELECT switch (MIC, INST) VOLUME knob BASS knob MIDDLE knob TREBLE knob REVERB knob [MIC/GUITAR] TUNER button TYPE switch (A-GUITAR, ACOUSTIC SIM, CLEAN, CRUNCH, LEAD, MIC) VOLUME knob BASS knob MIDDLE knob TREBLE knob CHORUS/DELAY knob (CHORUS, DELAY) REVERB knob [AUDIO IN] VOLUME knob [LINE IN] VOLUME knob BATTERY CHECK/MUTE button STEREO LINK/LINE OUT switch Indicators POWER BATTERY BATTERY CHECK/MUTE TUNER Connectors [MIC/INSTRUMENT] INPUT jack: Combo type (XLR type, 1/4-inch TRS phone), balanced FOOT SW (REVERB) jack: 1/4-inch TRS phone type [MIC/GUITAR] INPUT jack: Combo type (XLR type, 1/4-inch TRS phone), unbalanced FOOT SW (TIP: CHORUS/DELAY, RING: REVERB) jack: 1/4-inch TRS phone type [AUDIO IN] STEREO AUDIO IN (i-CUBE LINK) jack: 4-pole miniature phone type [LINE IN] STEREO LINE IN (L/MONO, R) jacks: 1/4-inch phone type AUX IN/STEREO LINK IN jack: 1/4-inch phone type LINE OUT (L/MONO, R)/STEREO LINK OUT (L, R) jacks: 1/4-inch phone type PHONES jack: Stereo 1/4-inch phone type DC IN jack Power Supply AC adaptor (DC 13 V) Alkaline battery (AA, LR6) x 8 Rechargeable Ni-MH battery (AA, HR6) x 8 Current Draw 730 mA Expected battery life under continuous use [OUTPUT POWER switch: MAX (Maximum power output: 50 W)] Alkaline battery: Approximately 4 hours Rechargeable Ni-MH battery: Approximately 5 hours (*1) [OUTPUT POWER switch: NORMAL (Maximum power output: 25 W)] Alkaline battery: Approximately 8 hours Rechargeable Ni-MH battery: Approximately 10 hours (*1) [OUTPUT POWER switch: ECO (Maximum power output: 10 W)] Alkaline battery: Approximately 16 hours Rechargeable Ni-MH battery: Approximately 20 hours (*1) *1 When using batteries having a capacity of 2,450 mAh. * These can vary depending on the specifications of the batteries, capacity of the batteries, and the conditions of use. Accessories Owner's manual AC adaptor Power cord Mini cable (4-pole miniature phone type) Options (sold separately) Carrying Case: CB-CS2 Footswitch (BOSS FS-5U, BOSS FS-6) Speaker Stand: ST-A95 SIZE AND WEIGHT Width 490 mm 19-5/16 inches Depth 341 mm 13-7/16 inches Height 305 mm 12-1/16 inches Weight 7.4 kg 16 lbs. 6 oz.

Enhance Your Sound and Add New Expression to Your Acoustic Cajon Performances The EC-10M ELCajon Mic Processor is a totally unique and innovative creative tool designed for the acoustic cajon. Compact and battery powered, the EC-10M picks up the cajon s acoustic sound with the included clip-on condenser mic, which is also used to trigger a variety of onboard tones for layering with the acoustic voice. You can then send both sounds to an amp or PA, giving you complete control over your stage sound. It s also possible to create percussion phrases with a built-in looper, and play additional sounds via integrated A/B foot pads or optional kick trigger pedals. Everywhere you play, the EC-10M transforms the acoustic cajon experience with a world of new expressive power. A unique and innovative creative tool for acoustic cajon players. FEATURES Easy setup simply attach the included clip-on condenser mic to the sound hole of the acoustic cajon and start playing Amplify the acoustic cajon the EC-10M can be used as a mic preamp for the supplied microphone A variety of sounds 16 onboard kits with tones including tambourine, shaker, djembe, electronic drums, and more can be layered with the acoustic cajon Multiple tones play two different electronic sounds by slapping the edge or head of the acoustic cajon Add pedals up to two kick trigger pedals (Roland KT-10, KT-9, or KD-7) can be connected to play additional sounds; integrated A/B foot pads can also trigger sounds Create loops and play along a simple looper function allows recording of rhythm phrases using the onboard sounds Versatile outputs send the microphone and layered sounds to a PA mixer via two independent outputs, or mix all sounds to one mono output Two-way power can be used with four AAA-size batteries (for up to five hours of use*) or included power supply *Maximum use time will vary depending on the battery specifications, capacity, and conditions of use. ENHANCE YOUR ACOUSTIC CAJON PERFORMANCES With the EC-10M, it s easy to take your acoustic cajon performances to new heights. Just attach the dedicated clip-on mic to the instrument s sound hole, and then layer EC-10M tones with the acoustic voice to create unique hybrid sounds. The 16 kit variations include percussion sounds such as tambourine, surdo, splash cymbal, and many others, plus acoustic snare drum and the famous TR-808 snare. Built-in cajon tones with ambience are also included for reinforcing your acoustic cajon s natural voice with powerful studio sound. ADD VARIETY AND PLAY WITH AUTHENTIC CAJON TECHNIQUES The EC-10M intelligently senses when the mic is picking up sounds from the head and edge surfaces on the cajon, giving you the ability to trigger distinctly different electronic sounds with each of these areas. This lets you integrate EC-10M sounds using authentic cajon techniques, so you don t have to adjust your playing in any way. TRIGGER EXTRA SOUNDS WITH FOOT PADS OR OPTIONAL PEDALS In addition to head and edge sounds, each of the 16 kits within the EC-10M includes two electronic sounds that are pre-assigned to the onboard A/B foot pads for triggering with toe taps while performing. If you d prefer to play these sounds with authentic foot techniques and a more solid feel, up to two Roland kick trigger pedals (KT-10, KT-9, or KD-7) can be connected.* *A splitter cable (such as the optional PCS-31L) is required to connect two kick trigger pedals to the EC-10M. LIGHT, COMPACT, AND BATTERY-POWERED You can use the compact EC-10M anywhere, since it weighs just 500 g/1.1 lbs. and runs on four AAA batteries. The included clip-on condenser mic is compact and convenient, eliminating the need to take up valuable stage space with a mic stand and large microphone. With its small footprint, the EC-10M is an easy fit in the tightest performing spaces. AMPLIFY YOUR ACOUSTIC CAJON AND EC-10M LAYERED SOUNDS Along with being a sound module for electronic sounds, the EC-10M also functions as a mic preamp for the clip-on mic, enabling you to amplify both the acoustic cajon and layered sounds through an amp or PA. You can send the sounds to two independent outputs, or mix them together to one. With the EC-10M, it s simple to achieve a powerful, consistent cajon sound at every gig, from intimate street performances to the biggest concert stages. RECORD PERCUSSION PHRASES AND PLAY ALONG The EC-10M includes a built-in looper* for the electronic layered sounds. This lets you create instant percussive backing for acoustic cajon playing or jamming with another instrument. The looper is controlled using the A/B foot pads, and you can capture electronic sounds triggered from the cajon and external pedals in your loops. And by changing the kits while the loop is playing, the tones in the loop are changed too. With this cool creative option, your acoustic cajon performances will be transformed forever! *Recorded phrases cannot be saved. Spécifications: -Sound Kit Variation 16 -Layered Sound Contents 2 (High, Low) -Controls [Top Panel] POWER switch (MIC) COMPRESSOR knob (MIC) VOLUME knob (ELECTRONIC) THRESHOLD knob (ELECTRONIC) VOLUME knob MODE SELECT button A button B button [Left Side] MIC GAIN knob ENHANCE switch -Indicators KIT Number -Connectors TRIGGER INPUT jack: 1/4-inch TRS phone type MIC INPUT jack: Stereo miniature type (Use included clip mic only) MIC/MIX OUTPUT jack (MONO): 1/4-inch phone type ELECTRONIC OUTPUT jack (MONO): 1/4-inch phone type DC IN jack -Power Supply AC adaptor (DC5.7V) Rechargeable Ni-MH battery (AAA, HR03) x 4 -Current Draw 150 mA -Expected battery life under continuous use Approx. 5 hours. * These can vary depending on the specifications of the batteries, capacity of the batteries, and the conditions of use. -Dimensions 175 (W) x 135 (D) x 55 (H) mm 6-15/16 (W) x 5-3/8 (D) x 2-3/16 (H) inches -Weight 500 g 1 lb 2 oz -Accessories Clip Mic Owner's manual Leaflet USING THE UNIT SAFELY AC adaptor -Options (sold separately) Kicks: KD-7, KT-9, KT-10 Stereo Split Cable: PCS-31L

A-49 MIDI Keyboard ControllerPortable Control with Pro ActionFeatures There s no shortage of portable MIDI keyboard controllers on the market, but portability often equates to subpar keyboard action. With the new A-49, the game has changed this lightweight, slim-line controller features a premium-grade, full-size keyboard that raises the bar in its class. Available in pearl white and black finishes, the A-49 is a dream for musicians seeking a simple, easy-to-use MIDI keyboard with pro-quality playing feel.- 49 full-size keys with velocity sensitivity- Lightweight and compact- Easy to use- Two knobs, two switches, and D-BEAM controller- USB bus powered; no AC adapter required- Bundled with Cakewalk SONAR LE software- Pearl white and black finishesGreat Keys, Great ControlsThe A-49 s keys have a rounded shape for better reaction to the player s touch and more comfortable glissandi. Other enhancements have been made to reduce the already low mechanical noise and eliminate vertical shake. All of these features add up to a keyboard that even the most discerning pros will appreciate.Add color to your sound and excitement to your performance by waving your hands over the invisible D-BEAM. The A-49 can assign all its controllers automatically for fully utilizing an external SuperNATURAL sound module such as the INTEGRA-7. It s also a great second keyboard for controlling synthesizers that have onboard SuperNATURAL sounds, such as the JUPITER-80 and JUPITER-50.Mobile MusicThe A-49 was born for mobile use. It s strong yet amazingly lightweight (less than six pounds/2.5 kilograms), making it easy to lift and carry. And although it has a very streamlined design, the A-49 features a full-size, premium keyboard with 49 velocity-sensitive keys.For the ultimate in portable convenience, the A-49 is powered from your computer s USB bus no power cable or adapter is required. It draws a minimal amount of current, which is ideal for a USB bus-powered device.Make Music with Your Mac or PCThe A-49 provides clean connections via its recessed rear panel, so you can place a computer monitor or laptop in the perfect position for creating music. Two knobs, two switches, and the D-BEAM controller are all easily accessible and intelligently arranged to make your workflow fast and fluid. Dedicated octave buttons offer immediate control of the key scale, and a transpose button is provided for adjusting the scale in semitone steps; LED indicators give you instant visual feedback of your octave/transpose settings. Other settings can be accessed via the Function button, which lets you use the keys to perform additional tasks printed above the keyboard.Perfect Partner for the iPad*Recently, many musicians have gravitated toward their Apple iPads to record musical ideas. While there are small MIDI keyboards that can be used with the iPad, the A-49 gives you pro playability as well as mobility. Its clean, clutter-free surface and excellent feel keeps your fingers on the keys and your mind on the music.*The A-49 can be connected to the iPad via Apple s Camera Connection Kit.

The Ultimate Percussive Sampling InstrumentThe new SPD-SX Sampling Pad puts powerful sample creation and playback under your sticks with innovative audio-capturing features, expressive playability, three multi-effects engines, and much more. The perfect addition to any acoustic or electronic drum kit, percussion setup, DJ booth, or keyboard rig, the SPD-SX is equally at home on the live stage, in the recording studio, pre-production suite, or dance club. The SPD-SX takes many of the proven concepts from its predecessor and raises them to a new level. Whether you re firing off one-shot samples, looped phrases, or complete audio playback tracks, the SPD-SX is loaded with the latest technology and tools to get the job done with speed, precision, and convenience. Enjoy the most advanced triggering and sampling technology in a sleek, easy-to-use percussion instrument.* Unique sampling-pad concept the only instrument of its kind in the world* 2 GB internal memory, enabling approximately 360 minutes of sampling (mono) without requiring external memory* Nine velocity-sensitive rubber pads, two external dual-trigger inputs* Easy capturing and assignment of audio data through Multi-Pad Sampling* Three units of multi-effects onboard, with two real-time control knobs and four dedicated effect buttons* Individual Pad Dynamics indicators show pad status and audio-level activity during performance* Expanded USB functionality (USB Mass Storage, USB MIDI/AUDIO, USB Memory)* Wave Manager software included for easily importing, assigning, and organizing samples* Large backlit LCDThe Playing FieldThe SPD-SX is equipped with nine highly sensitive rubber pads with two independent real-time control knobs and four dedicated effect buttons. Roland s most advanced triggering technology ensures the ultimate in accuracy and fully dynamic performance, while a large backlit LCD provides easy-to-read data in all varieties of environments. Each pad has a companion LED that illuminates to show the pad s status. When you trigger sample phrases, the LEDs remain lit to show you which pads are in play and which are not. In addition, the LEDs change illumination strength according to audio-level activity (similar to level meters on a mixing board). The high-contrast red divider lines help you see the pad zones clearly onstage.Improved Playability and FunctionalityToday, increasing numbers of drummers and percussionists need to incorporate audio samples into their performance. The SPD-SX will satisfy their increasing requirements with essential features such as individual click output routing, dedicated volume controls, Pad Check function, individual Sub Out, and more.Onboard EffectsThe SPD-SX has three multi-effects units onboard: one master unit and two units that are assignable per kit. The master effects engine lets you perform in real time like a DJ using the dedicated front-panel controls. Get your hands on the filter, delay, short looper, and user-assignable effect all of which can be creatively adjusted with the four front-panel buttons and two control knobs.Multi-Pad SamplingThere s much more to the SPD-SX than meets the eye. A powerful-yet-friendly lineup of features has been built into this little powerhouse, such as Multi-Pad Sampling. While audio streams in from an external audio player or computer (via Audio In or USB), simply strike each pad at the appropriate start/end points, and the sample will be automatically truncated and assigned to that pad. It s a fast, friendly way to create multi-sampled phrases and pad maps.SPD-SX Wave Manager Software IncludedThe SPD-SX s generous internal memory (2 GB) lets you store and carry your entire sample library inside. With no external memory required, you can house approximately 360 minutes of audio (10,000 files) at 16-bit, 44.1 kHz, mono. The built-in USB ports let you directly import audio files from USB flash memory. The bundled SPD-SX Wave Manager software app lets you import audio files directly from computer via USB, assign the samples to each pad, and organize the thousands of samples efficiently.

A-49 MIDI Keyboard ControllerPortable Control with Pro ActionFeatures There s no shortage of portable MIDI keyboard controllers on the market, but portability often equates to subpar keyboard action. With the new A-49, the game has changed this lightweight, slim-line controller features a premium-grade, full-size keyboard that raises the bar in its class. Available in pearl white and black finishes, the A-49 is a dream for musicians seeking a simple, easy-to-use MIDI keyboard with pro-quality playing feel.- 49 full-size keys with velocity sensitivity- Lightweight and compact- Easy to use- Two knobs, two switches, and D-BEAM controller- USB bus powered; no AC adapter required- Bundled with Cakewalk SONAR LE software- Pearl white and black finishesGreat Keys, Great ControlsThe A-49 s keys have a rounded shape for better reaction to the player s touch and more comfortable glissandi. Other enhancements have been made to reduce the already low mechanical noise and eliminate vertical shake. All of these features add up to a keyboard that even the most discerning pros will appreciate.Add color to your sound and excitement to your performance by waving your hands over the invisible D-BEAM. The A-49 can assign all its controllers automatically for fully utilizing an external SuperNATURAL sound module such as the INTEGRA-7. It s also a great second keyboard for controlling synthesizers that have onboard SuperNATURAL sounds, such as the JUPITER-80 and JUPITER-50.Mobile MusicThe A-49 was born for mobile use. It s strong yet amazingly lightweight (less than six pounds/2.5 kilograms), making it easy to lift and carry. And although it has a very streamlined design, the A-49 features a full-size, premium keyboard with 49 velocity-sensitive keys.For the ultimate in portable convenience, the A-49 is powered from your computer s USB bus no power cable or adapter is required. It draws a minimal amount of current, which is ideal for a USB bus-powered device.Make Music with Your Mac or PCThe A-49 provides clean connections via its recessed rear panel, so you can place a computer monitor or laptop in the perfect position for creating music. Two knobs, two switches, and the D-BEAM controller are all easily accessible and intelligently arranged to make your workflow fast and fluid. Dedicated octave buttons offer immediate control of the key scale, and a transpose button is provided for adjusting the scale in semitone steps; LED indicators give you instant visual feedback of your octave/transpose settings. Other settings can be accessed via the Function button, which lets you use the keys to perform additional tasks printed above the keyboard.Perfect Partner for the iPad*Recently, many musicians have gravitated toward their Apple iPads to record musical ideas. While there are small MIDI keyboards that can be used with the iPad, the A-49 gives you pro playability as well as mobility. Its clean, clutter-free surface and excellent feel keeps your fingers on the keys and your mind on the music.*The A-49 can be connected to the iPad via Apple s Camera Connection Kit.

NE-10: Noise Eater Acoustic Sound Isolation for V-Drums The NE-10 Noise Eater is a unique sound isolation board designed specifically for use with V-Drums kick pads/pedals and hi-hat control pedals. Thanks to its multiple dome-shaped rubber dampers, placing the NE-10 under a pedal/pad dramatically reduces the transfer of noises and vibrations through the floor caused by normal playing. This allows users in multi-level buildings to enjoy V-Drums freely without disturbing people occupying rooms or dwellings below. The NE-10 Noise Eater is very easy and convenient to use, with a compact, low-profile design that doesn t affect feel or playability. Highly effective sound isolation for V-Drums kick pad/pedal combinations and hi-hat pedals Low-profile design and rubber dampers maintain stability and playability Reduces playing noise and vibration transfer through the floor to rooms below by approximately 75 percent, based on Roland test data Lets users enjoy playing V-Drums without disturbing family members and neighbors Ideal for drummers that live in multi-level homes, apartments, and condos; also great for multi-level lesson studios and music classrooms Use standalone with KD-9 Kick Pad, KD-7 Kick Trigger, or FD-8 Hi-Hat Control Pedal When the NE-10 is used with a KD-140/KD-120 V-Kick or hi-hat stand for the VH-13/VH-11 V-Hi-Hat, companion NE-1 Noise Eater units (sold separately) must also be used under stand legs for maximum effectiveness NOISE EATER TECHNOLOGY FOR V-DRUMS: THE EASY SOLUTION TO ACOUSTIC NOISE TRANSFER PROBLEMS Roland s innovative Noise Eater technology helps V-Drums users enjoy playing any time without disturbing family members and neighbors in adjoining rooms and living spaces. One of the many benefits of V-Drums and their patented mesh-head pads in particular is that they re extremely quiet acoustically, allowing players to use headphones to practice and record in situations where it would be impossible to use acoustic drums. However, the physical action of using kick and hi-hat pedals in a multi-level building can result in unwelcome noise and vibration being transferred to rooms below via direct sound conduction through the floor. Based on Roland s tests, the unique isolating properties of Noise Eater products reduce this noise transfer by approximately 75 percent over using pedals without them, a dramatic improvement that lets you play day or night in situations where the noise could otherwise be a problem. Width (1) 550 mm Height (1) 40 mm Depth (1) 225 mm

Be immediately effective. Music production can take a lot of time, money and knowledge. And for many newbie growers, it's hard to know where to start. VERSELAB integrates all the tools to produce broadcast-ready titles without complications. You can focus only on the most important: your music. From intro to coda. Whether you are a singer, beatmaker, or both, it will be easy for you to create complete songs on VERSELAB, no matter what your musical knowledge. From your basic ideas, seamlessly create your beats and gimmicks from song templates and pattern generators, being guided through the process. Whether you are just a beginner, overwhelmed by the many options available, or looking for ideas, VERSELAB is here to help. Rhythms for your measurements. VERSELAB was designed for vocal recording and the creation of contemporary music. The high-quality XLR microphone input allows you to easily record vocal parts and add effects: Auto-Pitch, Harmonizer, Doubler, etc. Just plug in your mic, adjust the sound, and go. With 16 easily accessible takes and the ability to copy them wherever you want in the song, building structures becomes easy. Features: - Song production studio - Portable, stand-alone composition tool for vocal recording, beat production, sequencing and mixing - Intuitive workflow and AI-based pattern / chord generator, plus song templates - ZEN-Core sound generator with up to 128 voices - 3000 sounds and 80 drum kits - Import of samples and loops via SD card - Recording of samples and loops via line / microphone inputs - 8 parts (7 instrument tracks and 1 vocal track) - Loop tracks with Time-Stretching and Pitch-Shifting - Recording up to 16 voice takes - Vocal track effects: Auto-Pitch, Harmonizer, Doubling, Enhancer - Effects: EQ and multi-effects per part (90 different types of effects) - Master effects: Compressor, EQ, reverb, delay and chorus - TR step sequencer with up to 128 steps - Comfortable programming via 16 illuminated touch pads - Mix-Down mode with mastering effects - Plug and Play integration into the Roland Zenbeats Music Creation application via computer, tablet or smartphone - Built-in microphone - Power supply via external power supply unit or USB port - Stereo Mix output on 2 x 6.3 mm jack - Headphone output on 3.5 mm stereo mini jack - Headphone output on 6.3 mm stereo jack - 2 line inputs on 6.3 mm jack - Microphone input on XLR ( 48 V phantom power) - MIDI in / out - USB-B port - Included: Power supply and SD card - Dimensions: 354 x 208 x 60 mm - Weight: 1.17 kg