Pedalboard Tape- Length: 100 cm- Can be used like hook-and-loop fastener- No counterpart is required due to the use of interlocking hooks- Significantly stronger connection than with conventional hook-and-loop fasteners- Proven 3M adhesive technology ensures a secure and powerful hold for all pedal sizes- Self-adhesive- Individually shortenable- Width: 25 mm

All-in-one patch-bay for pedalboards- Suitable for MOD Slots in RockBoard pedalboards- Compatible with a wide range of other pedalboards- Acts as a central access point to the effects setup- Establishes clear cable routes to and from the pedal board- Removable front panel for mounting on or under pedal boards- 5x 6.3 mm TRS thru- 1x XLR Thru (male front / female rear)- 1x DC 2.1 x 5.5 mm barrel thru- 1x AC IEC thru (male front / female back)- All connections mirrored on the rear side- Dimensions with front panel (W x D x H): 175 x 85 x 47 mm- Dimensions without front panel (W x D x H): 160 x 85 x 33 mm- Weight: 450 g- Includes mounting screws, lock nuts and TX wrench

Rockboard HA 1 In-Ear Monitoring Headphone Amplifier, headphone amplifier for in-ear monitoring, ideal for singers, keyboarder, drummers, guitarists, bassists and other musicians, compact and lightweight design, practical, externally accessible battery compartment with clip lock, solid belt clip for fixing to belt or waistband, up to 12 hours battery run time, Volume/on-off control, Stereo/mono source switch, easily accessible, status LED, aluminium housing, 1 x combo jack stereo (6.35 mm)/ XLR input, 1 x 3.5 mm stereo jack headphone output, max. Output 2 x 110 mW at 16 Ohms, impedance

All-in-one patch-bay for pedalboards- Suitable for MOD Slots in RockBoard Pedalboards- Compatible with a wide range of other pedalboards- Acts as a central access point to the effect setup- Establishes clear cable routes to and from the pedalboard- Removable front panel for mounting on or under pedalboards- 3x 6.3 mm TRS thru- 2x XLR thru (male front / female rear)- 1x XLR thru (female front / male back)- 1x DC 2.1 x 5.5 mm hollow plug thru- 1x AC IEC thru (male front / female rear)- All connections mirrored on the rear side- Dimensions with front panel (W x D x H): 175 x 85 x 47 mm- Dimensions without front panel (W x D x H): 160 x 85 x 33 mm- Weight: 450 g- Includes mounting screws, lock nuts and TX wrench

Wired Volume Control for In-Ear Monitors- Perfect for singers, keyboardists, drummers, guitarists, bassists and other musicians- With metal belt clip- Stereo input and stereo output possible- Mono/Stereo switch to send an incoming mono signal to both ears- XLR / 6.3 mm - TRS combo input jack with locking mechanism to prevent accidental disconnection of the XLR cable- 3.5 mm Stereo output jack for connecting your preferred in-ear monitor, earphone or headphones- Passive volume control - no batteries required- Handy belt pouch format for easy access and reliable connection to the source- Compact and lightweight design- Aluminium housing- Dimensions including clip, sockets and buttons (L x W x H): 30 x 33 x 86 mm- Weight: 72 g

Universal power supply mounting solution for pedalboards- Fits all new RockBoards except Duo 2.0 and 2.1- Made of aluminium- No drill holes necessary- Dimensions (L x W): 241 x 122 mm- Weight: 210 g

MIDI and USB patch-bay- All-in-one patch-bay for pedalboards- Suitable for MOD slots in RockBoard pedalboards- Compatible with a wide range of other pedal boards- Acts as a central access point to the effect setup- Establishes clear cable routes to and from the pedal board- Removable front panel for mounting on or under pedal boards- 4x 6.3 mm TRS thru- 2x 5-Pin DIN MIDI thru- 1x USB Type A thru- 1x DC 2.1 x 5.5 mm hollow plug thru- 1x AC IEC thru (male front / female rear)- All connections mirrored on the rear side- Dimensions with front panel (W x D x H): 175 x 85 x 47 mm- Dimensions without front panel (W x D x H): 160 x 85 x 33 mm- Weight: 420 g- Includes mounting screws, lock nuts and TX wrench

Headphone Amplifier for In-Ear Monitoring- Wired, two-channel in-ear monitor amplifier for singers, keyboardists, drummers, guitarists, bassists and other musicians- With metal belt clip- 5/8" and 3/8" screw adapter for installation on a microphone stand- Two separate input jacks for separate monitor signals or a stereo signal- XLR/TRS combo input jack with locking mechanism that prevents accidental disconnection of the XLR cable- 3.5 mm Stereo output jack for connecting your preferred in-ear monitor, earphone or headphones- MONO/STEREO switch to send an incoming mono signal to both ears- Volume and balance controls- ON/OFF switch to switch off when not in use- LED display for power supply- Power supply via 9 V DC power supply with negative pole on the center contact or 9 V battery (both not included)- Easily accessible battery compartment- Practical belt pouch format for easy access and reliable connection to the source- Compact, lightweight design with aluminum housing- Dimensions including clip, sockets and buttons (L x W x H): 102 x 85 x 34 mm- Weight: 295 g (without battery)

Pedalboard- Suitable for approx. 9 to 15 effect pedals- Torsion-resistant and lightweight aluminium construction- Slot design for easy pedal mounting- Made of cold-rolled aluminium sheet- Additional reinforcement through U-shaped support strut- Absolutely flat, 10° angled board surface - no welded seams- Insert for RockBoard Module Patchbays- Compatible with RockBoard The Tray - universal power supply mounting solution (not included)- Robust black powder-coated surface- Mounting holes on both sides for RockBoard LED Light (art. 461657 - not included)- Board dimensions (L x W): 622 x 330 mm- Height incl. rubber feet: 37 - 71 mm- Inside dimensions gig bag (W x D x H): 660 x 370 x 130 mm- Weight board: 2.05 kg- Weight gig bag: approx. 1.75 kg- Incl. gig bag, self-adhesive hook-and-loop fastener (50 mm wide) and fleece tape (25 mm wide) and cable ties

Power Reducer- Maximum output power of the amplifier 100 watts- 3 Separate inputs for 4, 8 or 16 ohms- 1 x 3.5 mm AUX input- 2 x 6.3 mm speaker outputs (parallel)- 1 x 6.3 mm line level output- 1 x 3.5 mm headphone output- 1 x XLR-DI output- 1 x Volume control on the speaker- 1 x Level control for the line level output- 1 x On/Off switch for loudspeaker simulation- 1 x Switch for speaker simulation 2 x 12" or 4 x 12"- 1 x 9 VDC, 2.1 x 5.5 mm barrel connector, centre negative- Input voltage for operation with headphones / DI / line outputs- 1 x Fan- 1 x LED for overload indication- Dimensions (L x W x H): 180 x 160 x 125 mm (incl. feet and controller)- Weight: 1545 g

Flat MIDI Cable- Length: 60 cm- With rectangular profile and compact omni-directional plugs- Plug direction can be angled from straight in 2 directions by 90°- Plug alignment lockable with 1.5 mm hex key (not included)- Compact design saves space on the pedalboard- Flat rectangular cable prevents cable breakage and twisting and keeps the setup clear- Suitable for use with Clock / SYNC functionality & phantom power- Flexible copper conductor 5 x 7 x 0.12 mm- Angled DIN 5 pin plug- Max. nominal current 1A- PVC external insulation- Operating temperatures: -20°C to +60°C- External dimensions of cable (W x H): 6.5 x 3.5 mm (rectangular)- Outer dimensions, straight plug (L x W x H): 33 x 20 x 15 mm- Outer dimensions, angled plug (L x W x H): 33 x 20 x 20 mm- Colour: Black

Pedal Board and Gigbag for Effects Devices- For approx. 5 to 10 effects pedals (depending on size)- Torsion-resistant, lightweight aluminium construction- Slot design for easy pedal attachment- Mounting holes on both sides for RockBoard LED Light (optional, not included in delivery)- Made from one cold-rolled aluminium sheet- Additional stiffening via U-shaped support strut- Completely flat, 10° angled board surface - no welds- Slot for RockBoard Module Patchbays- Robust black powder-coated surface- Width: 432 mm- Depth: 234 mm- Height including rubber feet: 37 - 71 mm- Board weight: 950 g- With gigbag- Weight of gigbag: approx. 1200 g- Internal dimensions of case (L x W x D): 460 x 290 x 120 mm- Includes self-adhesive hook tape (50 mm wide) and loop tape (25 mm wide) as well as cable ties

Pedalboard for Effects Devices- For approx. 3 to 5 effect pedals - depending on size- Torsion-resistant and lightweight aluminium construction- Slot design for easy pedal mounting- Made of cold-rolled aluminium sheet- Additional stiffening thanks to u-shaped struts- Completely flat 10° angled board surface - no weld seams- Robust black powder-coated surface- Right side mounting holes for RockBoard LED Light (article no. 461657, not included)- Dimensions pedalboard (W x D x H) including rubber feet): 320 x 142 x 35 - 58 mm- Weight of pedal board: 0.5 kg- Includes gig bag, self-adhesive hook-and-loop fastener (50 mm wide), hook-and-loop fastener (25 mm wide) and cable ties- Internal dimensions of gig bag (L x W x D): 360 x 185 x 115 mm- Weight of gig bag: approx. 0,835 kg

Flat MIDI Cable- Length: 30 cm- With rectangular profile and compact omni-directional plugs- Plug direction can be angled by 90° from straight in 2 directions- Plug alignment can be locked using a 1.5 mm hex key (not included)- Compact design saves space on the pedalboard- Flat rectangular cable prevents breaks and twisting while keeping your setup clear- Suitable for use with Clock/SYNC functionality & phantom power- Flexible copper conductor 5 x 7 x 0.12 mm- Angled DIN 5-Pin connector- Max. nominal current: 1 A- PVC external insulation- Operating temperatures: -20°C to + 60°C- External dimensions cable (W x H): 6.5 x 3.5 mm (rectangular)- Outer dimensions, straight plug (L x W x H): 33 x 20 x 15 mm- Outer dimensions, angled plug (L x W x H): 33 x 20 x 20 mm- Colour: Black

Handle Set- For the RockBoard TRES, QUAD & CINQUE series- Easy mounting in the slot grid of the RockBoard pedalboard for a secure hold- Ergonomically shaped handles for comfortable handling- Powder-coated steel- Dimensions (L x W): 129 x 52 mm / 5 5/64" x 2 3/64"- Weight: approx. 80 g / 0.18 lb- Colour: Black- Including mounting screws and tools

Pedalboard- Suitable for approx. 7 to 12 effect pedals- Torsion-resistant and lightweight aluminium construction- Slotted design for easy pedal mounting- Made of cold-rolled aluminium sheet- Additional stiffening through U-shaped support brace- Absolutely flat, 10° angled board surface - no welds- Insert for RockBoard Module Patchbays- Compatible with RockBoard The Tray - universal power supply mounting solution (not included)- Robust black powder-coated surface- Mounting holes on both sides for RockBoard LED Light (Art.461657 - not included)- Dimensions (L x W): 470 x 330 mm- Height incl. rubber feet: 37 - 71 mm- Weight board: 1.5 kg- Weight gig bag: approx. 1.5 kg- Incldues gig bag, self-adhesive hook (50 mm wide) and loop tape (25 mm wide) and cable ties- Internal dimensions (W x D x H): 505 x 370 x 130 mm

Pedalboard- Suitable for approx. 9 to 15 effect pedals- Torsion-resistant and lightweight aluminium construction- Slot design for easy pedal mounting- Made of cold-rolled aluminium sheet- Additional stiffening through U-shaped support strut- Absolutely flat, 10° angled board surface - no welds- Slot for RockBoard Module Patchbays- Compatible with RockBoard The Tray - universal power supply mounting solution (not included)- Robust black powder-coated surface- Mounting holes on both sides for RockBoard LED Light (Art.461657 - not included)- Dimensions (L x W): 622 x 330 mm- Height incl. rubber feet: 37 - 71 mm- Weight board: 2.05 kg- Weight flight case: approx. 5.25 kg- Includes flight case, self-adhesive Velcro (50 mm wide) and fleece tape (25 mm wide) and cable ties- Internal dimensions (W x D x H): 630 x 345 x 165 mm- Internal dimensions (W x D x H): 660 x 380 x 195 mm