Effects Loops Switcher with Mic Preamp- For vocals or instruments- By way of an effects loop, enables you to incorporate guitar FX pedals into the signal path- Adjustable Dry / Wet- Adjustable Send and Return- Adjustable Low / High EQ- Mute button- Loop Wet / Dry button- 48 V Phantom power- XLR In / Out- Jack In / Out- Incl. external power supply

3 analog TRS 1/4 " jack stereo inputs with individual volume control for keyboards- Digital USB / MIDI port for laptop soft synth- 24 bit / 192 kHz converter- On-board sustain and effect loop footswitch for external effects such as delay / reverb- Stage monitor outputs for adjusting the level on the stage- 2 XLR main outputs for connecting a PA system- Switchable stereo effect bus to mono- Built-in sustain footswitch for connection to master keyboard or digital piano- Steel construction with steel shaft potentiometer and switch- Gnd / lift per output channel- Operation with external 15 V DC power supply (included)

Passive Stereo DI Box- 2 Independent ProDI channels- 15 dB pad- Frequency response: 20 Hz - 18 kHz- Ground lift- Connections: Jack in / out, XLR out- Ideal for stereo sources such as keyboards, drum computers and digital recorders

Stereo Bluetooth Receiver- 2 Balanced XLR outputs- Integrated adjustable headphone amplifier with 3.5 mm stereo jack connection- Switchable ground lift- Switchable mono summing- Power supply either via phantom power or USB-C for use with laptop or mains voltage- Status LED- Bluetooth 5.0- Robust metal housing- Dimensions: 84 x 127 x 51 mm- Weight: 500 g

Professional Keyboard Mixer in 19" Format- Four stereo analog inputs for keyboards- Redundant USB ports for software synthesizer- Stereo aux sends/returns with optional foot pedal control- Headphone outputs and Cue switch for silent monitoring- Several KL-8 can be connected to larger setups

4-Channel Audio Snake- Receives analogue audio signals via Cat5/6 lines- XLR-out for operation within an existing cable infrastructure- Ethernet connection Neutrik Ethercon- Powder coated steel housing- 0.6 m whip with robust, waterproofed nylon braid- Compatible with Radial Engineering Catapult Mini TX (article no. 468943) and Radial Engineering Catapult Mini TRS (article no. 468952) (both not included)

4-Channel Audio Snake- Transmits analogue audio signals over Cat5/6 lines- XLR-in for operation within an existing cable infrastructure- Ethernet connection Neutrik Ethercon- Powder coated steel housing- 0.6 m whip with robust, waterproofed nylon braid- Compatible with Radial Engineering Catapult Mini RX (article no. 468948) and Radial Engineering Catapult Mini TRS (article no. 468952) (both not included)

Microphone Mute Switch- Pedal for dynamic microphones and line signals- Suitable as splitter- Switchable GDN lift- Connections: XLR in/ out- Suitable as talkback for communication between musician and crew or to mute hardware as vocalists etc.

8-Channel line level auto switcher- Redundant backup switch- For live applications from previously recorded backing tracks- Switches to a second backup multi-track system if an error occurs in the main path.- Silent switching- 8x XLR outputs- 2x 8 Jack inputs- 1x 8-Channel 25-pin D-Sub output- 2x 8-Channel 25-pin D-Sub input- Contact inputs and outputs- Ground lift switch- Frequency range: 20 - 20,000 Hz- Gain: -20 dB- Dimensions 44.5 x 15.25 x 4.5 cm- Design: 19" / 1 HE- Weight: 4.4 kg

Active re-amping box- Splitter for guitar amps- Converts a +4 dB signal into a hi-impedance signal for guitar amplifiers or effects pedals- 1x XLR in- 2x Jack out- Phase reverse- Output gain- Attenuation 10 dB to 60 dB- Incl. power supply

4-Channel Audio Snake- Transmits analogue audio or digital AES signals over Cat5/6 lines- 4 XLR female inputs- 4 XLR male thru- RJ45 output and thru- For operating within an existing cable infrastructure- Hard-wired or isolated splits- Transmits four AES signals (eight audio channels)- Ethernet connection with switchable ground lift

4-Channel Audio Snake- Receives analogue audio signals via Cat5/6 lines- Jack plug for operating within an existing cable infrastructure- Ethernet connection Neutrik Ethercon- Powder coated steel housing- 0.6 m whip with robust, waterproofed nylon braid- Compatible with Radial Engineering Catapult Mini TX (article no. 468943) and Radial Engineering Catapult Mini RX (article no. 468948) (both not included)

Class A phase controller- For combining two sources such as microphone and DI signal- Switchable Gnd / lift- Polarity and bypass- XLR in out- Low pass filter- Includes power supply- Dimensions: 114 x 57 x 147 mm- Weight: 1.4 kg

Professional Passive DI Box- Jack input- Jack thru connection- XLR output- Switchable -15dB pad- Merge function to combine 2 line signals to 1x XLR out- Switchable speaker simulation for 12 guitar speaker- Ground lift switch- Phase switch (polarity)