The KH 80 DSP is designed for use as a near-field monitor, as a front loudspeaker in small multi-channel systems, or as a rear loudspeaker in a compact multi-channel systems. Due it small footprint, it is well suited to desktop applications. It can be used in project, music, broadcast centers, OB vans, and post production studios for tracking, mixing, and mastering. The KH 80 DSP two-way active studio monitor features a Mathematically Modeled Dispersion Waveguide (MMD ), flexible acoustical controls, various input options, high efficiency amplifiers, and an extensive range of mounting hardware. A standard IP network connection allows the monitoring system to be controlled using Neumann.Control which runs on a PC/Mac computer or Android/iOS tablet. This allows the loudspeaker to be used in diverse acoustical conditions, with any source equipment and in a wide variety of physical locations. The KH 80 DSP represents the latest in acoustic and electronic simulation and measurement technologies to ensure the most accurate sound reproduction possible. - 4 composite-sandwich membrane woofer, 1 alloy fabric dome tweeter with Mathematically Modeled Dispersion (MMD ) waveguide, and protective grilles - 120 70 W class D-amplifiers with thermal protection - Compact, vented enclosure - Frequency response: 57 Hz - 21 kHz, (-3 dB) - Maximum SPL: 108.8 dB at 1 m - Input gain and output level control - Eighth-order phase linear DSP crossover - External four-position Low-Mid switch and internal 8x IIR 1st order PEQ/Shelf Precision Alignment plus low / high shelf global balance acoustical control set - 70 ms delay for time-of-flight and lip-sync adjustment - Self-generated noise level

The KH 310 three-way active tri-amplified monitor features a Mathematically Modeled Dispersion Waveguide (MMD), flexible acoustical controls, various input options and an extensive range of mounting hardware. This allows the loudspeaker to be used in diverse acoustical conditions, with any source equipment and in a wide variety of physical locations. The KH 310 represents the latest in acoustic and electronic simulation and measurement technologies to ensure the most accurate sound reproduction possible. The KH 310 is designed for use as a near-field monitor, as a front loudspeaker in mid-sized multi-channel systems, or as a rear loudspeaker in a larger multi-channel system. It can be used in project, music, broadcast centers, OB vans, and post production studios for tracking, mixing, and mastering. Features - Powerful alloy fabric dome : Low-distortion high-frequency reproduction - Elliptical Mathematically Modeled Dispersion (MMD) waveguide, with wide horizontal and narrow vertical dispersion : * Smoother off-axis response, * More forgiving of diverse acoustical environments * Freedom of movement across the mixing console * Reduces reflections off the mixing console - New in-house simulated drivers : * Latest modeling techniques used to minimize non-linear (intermodulation) distortion - Fabric dome, neodymium magnet, midrange driver * Dedicated driver reproduces important midrange frequencies, which is especially important for speech and vocals * Light weight dome has better transient response and less breakup modes than cone designs * High power magnet reduces harmonic and intermodulation distortion - Long throw composite sandwich cone bass driver with Extremely Linear Force Factor (ELFF) and ribbed surround * Damping of break-up modes and low distortion at high sound levels * Linear pistonic motor gives a very low harmonic distortion even at high excursions * Reduced radial break-up modes on the ribbed surround - Two-color dimmable Neumann logo * Displays operation status and activation of the extensive protection system * Dimmable for low lighting level conditions or behind the screen applications - Compact sealed three-way cabinet design (magnetically shielded) * No standing wave resonances * Fastest bass transient response * Reduced intermodulation distortion in midrange - One-piece front panel with no discontinuities * Reduced diffraction and smoother frequency response - Powerful analog class AB amplifiers with large headroom * Improved transient response - Independent thermo limiters for woofer, midrange dome and tweeter to protect the voice coils. Woofer soft clip and excursion limiters * Fast acting, high reliability and allows extraction of the maximum performance from the system - Production consistency due to individual hand-alignment in final test * Any KH 310 is pair-matched to any other KH 310 - 4-position bass, low-mid and treble acoustical controls * More control in diverse acoustical environments - Wide range input gain and output level controls * Easier interfacing with signal sources - Ground lift * Reduced noise in electrically noisy environments and over-comes ground loops - Universal switched-mode power supply (100 ... 240 V) * One version works in any country and robust to poor quality mains supply - Extensive mounting hardware options * More flexibility in mounting cabinets in more diverse locations and backwards compatibility with previous models - Optional robust metal grille * Can be used, if required, to protect the drivers - Optional transportation accessories * Stylish soft carry bag with space for cables * Robust wooden flight case Delivery Includes - 1x KH 310 A - 3x Main cables (European, UK and US version) - 4x Self-adhesive feet - 1x Operating manual - 1x Supplement Getting Started Quickly Technical Data : Acoustical - 3 dB free field frequency response : 34 Hz - 21 kHz, ± 3 dB - Pass band free field frequency response : 36 Hz - 20 kHz, ± 2 dB - Self-generated noise (with input gain set to 100 dB for 0 dBu) : 85 Hz - Max. SPL in full space / calc. in half space at 3% THD at 1m : 114.2 / 116.3 dB SPL (averaged between 100 Hz and 6 kHz) - Bass capability: Max. SPL in half space at 3% THD at 1m : 111.3 dB SPL (averaged between 50 Hz and 100 Hz) - Max. short term SPL with IEC-weighted noise (IEC 286-5) at 1 m, in typical listening conditions : 113 dB(C) SPL - Max. short term SPL with music material at 2.3 m, in typical listening conditions (pair) : * 100 dB(C) SPL (full range) * 107 dB(C) SPL (with subwoofer) - Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single/pair) : * 93 / 99 dB(C) SPL (full range) * 94 / 100 dB(C) SPL (with subwoofer) Electronics - Bass / Midrange / Treble Class AB amplifiers, cont. (peak) output power* : 150 W (210 W) / 70 W (90 W) / 70 W (90 W) - Controller design : Analog, active - Crossover frequencies : 650 Hz / 2 kHz - Crossover slope : 24 dB/oct, 4th order - Equalization - Bass : 0, 2.5, 5, 7.5 dB - Equalization - Low Mid : 0, 1.5, 3, 4.5 dB - Equalization - Treble : 1, 0, 1, 2 dB - Protection circuitry : Independent thermo limiters for woofer, midrange dome and tweeter. Woofer soft clip and excursion limiters - Infrasonic filter - frequency; slope : 15 Hz; 6 dB/oct - Input : XLR, analog electronically balanced - Impedance : * 10k Ohms in position 94/108 dB SPL at 1 m * 20k Ohms in position 100/114 dB SPL at 1 m - Input gain control (sensitivity) : 0 dBu to 15 dBu - Output level control : 94, 100, 108, 114 dB SPL - CMRR : > 56 dB @ 100 - 15 kHz - Max. input level : 24 dBu Displays and Mains Power - Displays and indicators - power on : Neumann logo White - Displays and indicators - limit / clip : Neumann logo Red - Mains Power Supply, voltage; frequency : 100-240 V~; 50/60 Hz - Power consumption - idle : 24 W - Power consumption - full output : 300 W Mechanics - Cabinet surface finish, colour : * Painted wood and polyurethane, * Anthracite (RAL 7021). * Aluminum electronics panel, Black. - Baffle cover : Optional removable metal grille - Operating conditions : 10° C to 40° C ( 50° F to 104° F),

The KH 310 three-way active tri-amplified monitor features a Mathematically Modeled Dispersion Waveguide (MMD), flexible acoustical controls, various input options and an extensive range of mounting hardware. This allows the loudspeaker to be used in diverse acoustical conditions, with any source equipment and in a wide variety of physical locations. The KH 310 represents the latest in acoustic and electronic simulation and measurement technologies to ensure the most accurate sound reproduction possible. The KH 310 is designed for use as a near-field monitor, as a front loudspeaker in mid-sized multi-channel systems, or as a rear loudspeaker in a larger multi-channel system. It can be used in project, music, broadcast centers, OB vans, and post production studios for tracking, mixing, and mastering. Features - Powerful alloy fabric dome : Low-distortion high-frequency reproduction - Elliptical Mathematically Modeled Dispersion (MMD) waveguide, with wide horizontal and narrow vertical dispersion : * Smoother off-axis response, * More forgiving of diverse acoustical environments * Freedom of movement across the mixing console * Reduces reflections off the mixing console - New in-house simulated drivers : * Latest modeling techniques used to minimize non-linear (intermodulation) distortion - Fabric dome, neodymium magnet, midrange driver * Dedicated driver reproduces important midrange frequencies, which is especially important for speech and vocals * Light weight dome has better transient response and less breakup modes than cone designs * High power magnet reduces harmonic and intermodulation distortion - Long throw composite sandwich cone bass driver with Extremely Linear Force Factor (ELFF) and ribbed surround * Damping of break-up modes and low distortion at high sound levels * Linear pistonic motor gives a very low harmonic distortion even at high excursions * Reduced radial break-up modes on the ribbed surround - Two-color dimmable Neumann logo * Displays operation status and activation of the extensive protection system * Dimmable for low lighting level conditions or behind the screen applications - Compact sealed three-way cabinet design (magnetically shielded) * No standing wave resonances * Fastest bass transient response * Reduced intermodulation distortion in midrange - One-piece front panel with no discontinuities * Reduced diffraction and smoother frequency response - Powerful analog class AB amplifiers with large headroom * Improved transient response - Independent thermo limiters for woofer, midrange dome and tweeter to protect the voice coils. Woofer soft clip and excursion limiters * Fast acting, high reliability and allows extraction of the maximum performance from the system - Production consistency due to individual hand-alignment in final test * Any KH 310 is pair-matched to any other KH 310 - 4-position bass, low-mid and treble acoustical controls * More control in diverse acoustical environments - Wide range input gain and output level controls * Easier interfacing with signal sources - Ground lift * Reduced noise in electrically noisy environments and over-comes ground loops - Universal switched-mode power supply (100 ... 240 V) * One version works in any country and robust to poor quality mains supply - Extensive mounting hardware options * More flexibility in mounting cabinets in more diverse locations and backwards compatibility with previous models - Optional robust metal grille * Can be used, if required, to protect the drivers - Optional transportation accessories * Stylish soft carry bag with space for cables * Robust wooden flight case Delivery Includes - 1x KH 310 A - 3x Main cables (European, UK and US version) - 4x Self-adhesive feet - 1x Operating manual - 1x Supplement Getting Started Quickly Technical Data : Acoustical - 3 dB free field frequency response : 34 Hz - 21 kHz, ± 3 dB - Pass band free field frequency response : 36 Hz - 20 kHz, ± 2 dB - Self-generated noise (with input gain set to 100 dB for 0 dBu) : 85 Hz - Max. SPL in full space / calc. in half space at 3% THD at 1m : 114.2 / 116.3 dB SPL (averaged between 100 Hz and 6 kHz) - Bass capability: Max. SPL in half space at 3% THD at 1m : 111.3 dB SPL (averaged between 50 Hz and 100 Hz) - Max. short term SPL with IEC-weighted noise (IEC 286-5) at 1 m, in typical listening conditions : 113 dB(C) SPL - Max. short term SPL with music material at 2.3 m, in typical listening conditions (pair) : * 100 dB(C) SPL (full range) * 107 dB(C) SPL (with subwoofer) - Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single/pair) : * 93 / 99 dB(C) SPL (full range) * 94 / 100 dB(C) SPL (with subwoofer) Electronics - Bass / Midrange / Treble Class AB amplifiers, cont. (peak) output power* : 150 W (210 W) / 70 W (90 W) / 70 W (90 W) - Controller design : Analog, active - Crossover frequencies : 650 Hz / 2 kHz - Crossover slope : 24 dB/oct, 4th order - Equalization - Bass : 0, 2.5, 5, 7.5 dB - Equalization - Low Mid : 0, 1.5, 3, 4.5 dB - Equalization - Treble : 1, 0, 1, 2 dB - Protection circuitry : Independent thermo limiters for woofer, midrange dome and tweeter. Woofer soft clip and excursion limiters - Infrasonic filter - frequency; slope : 15 Hz; 6 dB/oct - Input : XLR, analog electronically balanced - Impedance : * 10k Ohms in position 94/108 dB SPL at 1 m * 20k Ohms in position 100/114 dB SPL at 1 m - Input gain control (sensitivity) : 0 dBu to 15 dBu - Output level control : 94, 100, 108, 114 dB SPL - CMRR : > 56 dB @ 100 - 15 kHz - Max. input level : 24 dBu Displays and Mains Power - Displays and indicators - power on : Neumann logo White - Displays and indicators - limit / clip : Neumann logo Red - Mains Power Supply, voltage; frequency : 100-240 V~; 50/60 Hz - Power consumption - idle : 24 W - Power consumption - full output : 300 W Mechanics - Cabinet surface finish, colour : * Painted wood and polyurethane, * Anthracite (RAL 7021). * Aluminum electronics panel, Black. - Baffle cover : Optional removable metal grille - Operating conditions : 10° C to 40° C ( 50° F to 104° F),

Since the 1950s, the Neumann M 50 has been heralded as the ideal microphone for orchestral recording and string scoring. With its phenomenal transient response and unique directional characteristic, this classic mic has endeared many fans, both in the control room and on the soundstage. The new M 150 Tube* takes many of the features from the original M 50 and incorporates them in a very modern microphone. With low self noise, a Titanium membrane and capsule, transformerless tube amplifier and sophisticated power supply, the M 150 Tube is not a reissue but an entirely new microphone in its own right. Acoustical features The Titanium diaphragm of the pressure capsule is 12 mm in diameter and is exceedingly thin. Although Titanium has been known to have unique and desirable characteristics for some time, it has, until very recently, been very difficult to procure in the quality necessary for use in a microphone of this type. The headgrille is shaped just like that on the original M 50, as requested by various top engineers in the recording industry. Due to mounting the pressure capsule with the diaphragm flush to the surface of a small (40 mm) sphere, the directional characteristic of the M 150 Tube is entirely unique. At the lowest frequencies, this system is a pure omnipressure transducer with a perfectly circular polar pattern. However, in the mid- and upper frequencies, the pickup pattern becomes more narrow. The M 150 Tube is an ideal microphone for any stereo, 5.1 or 7.1 surround recording, particularly DECCA Tree technique. Electrical features The dynamic range of the M 150 Tube is 119 dB, allowing reproduction of the full musical expression, without restraint. With a low self noise of 15 dB-A, more gain can be used without risk of adding noise to the final product. The transformerless output circuit of this microphone allows for extremely fine reproduction of small signals and low frequency information. Also, long cable runs can be used with no loss of signal quality.

The KH 420 is designed for use as a mid-field or main monitor in stereo and multi-channel systems. It can be used in project, music, broadcast centers, and post production studios for tracking, mixing, and mastering. The KH 420 three-way analog active studio monitor features a Mathematically Modeled Dispersion™ Waveguide (MMD™), flexible acoustical controls, various input options, analog class-AB amplifiers, and an extensive range of mounting hardware. This allows the loudspeaker to be used in diverse acoustical conditions, with any source equipment and in a wide variety of physical locations. The KH 420 represents the latest in acoustic and electronic simulation and measurement technologies to ensure the most accurate sound reproduction possible. Specifications • 10 woofer, 3 soft dome midrange, 1 alloy fabric dome tweeter and protective grille • 330 140 140 W class AB-amplifiers with thermal protection • Vented enclosure with rotatable Mathematically Modeled Dispersion™ (MMD™) Waveguide • Frequency response: 26 Hz - 22 kHz, (-3 dB) • Maximum SPL: 122.4 dB at 1m • Input gain control, output level control, ground lift • Fourth-order crossover and 4-position bass, low-mid and treble acoustical controls, and parametric EQ • Self-generated noise level

For attachment to a lighting truss and for attachment to speaker and light stands- Compatible with various products of the Neumann LH series- Colour: Metal