Effect Pedal for Electric Guitar- Analogue attenuator- For use in effects loop of amplifiers- For a saturated preamp output, but with lower output volume- Passive operation- Control for level- Input and output: 6.3 mm mono jack- No power supply required- Dimensions (L x W x H) 40 x 110 x 50 mm- Weight 120 g- Made in USA

Effect Pedal for Electric Guitar- Distortion / Boost- Limited to 5,000 pieces, this is a revised reissue of the pedal designed with Stu G (Delirious )- New look, improved gain range, extended headroom, more output power- 4 distorition modes- Controls: Volume, Tone and Gain- Switches: Cut/Flat, G1 (for selecting the clipping circuit), G2 (for selecting additional clipping circuits)- Footswitches: Effect bypass- Status LED- Input and output: 6.3 mm mono jack- Remote footswitch input (for remote control of G2 toggle switch): 6.3 mm TRS jack- Current consumption: 64 mA- Power supply via 9 V DC mains adapter (2.1 x 5.5 mm barrel connector, centre negative) - suitable mains adapter Art. 409939 (not included)- Aluminium housing- Dimensions (L x W x H): 122 x 66 x 41 mm- Weight: 395 g- Made in USA

Parametric Mid-EQ Effect Pedal- Analogue operation- Up to +/- 15 dB Mid Boost or Cut- Center frequency adjustable from 400 Hz to 7.5 kHz- Switchable Q setting (LO / HI)- True bypass- Controls for Volume, Mids and Sweep- Lo / Hi toggle switch to select the Q-setting- Bypass footswitch- Status LED- Metal housing- 6.3 mm Mono IN / OUT jacks- Power supply via optional 9V DC adapter with 2.1 x 5.5mm barrel connector and polarity: (-) inside (power supply not included)- Power consumption: Less than 100 mA- Dimensions: 66 x 122 x 40 mm- Weight: 290 g

Effect Pedal for Electric Guitar Overdrive / Distortion Emulation of the gain stages of a classic Portastudio 424 MKI multi-track recording device Buffered Bypass Controls for Volume, Gain 1, Gain 2, Bass and Treble Ground Lift switch for the XLR output Soft-touch footswitch Status LED Metal housing Input and output: 6.35 mm mono jack Balanced XLR output Power supply via optional 9 V DC (not included, 2.1 x 5.5 mm barrel connector, centre negative) Current consumption: 50 mA Dimensions (L x W x H): 122 x 66 x 41 mm Weight: 290 g Made in USA Note: Battery operation not supported

Preamp / EQ DI Box- Limited 10 Year Anniversary Edition- Sound and character of a vintage Neve studio console- 2 Serial gain stages- Suitable for electric guitar, acoustic guitar, bass, keyboards, vocals or other instruments- Extended EQ section with +/- 17 dB cut/boost in each band- Can provide 48V phantom power to condenser microphones- True bypass- Controls for Master, Pre-Vol, Step, Hi Pass, Treble, Middle, Bass, Treble Shift, Mid Shift, Bass Shift- Hi-Pass toggle switch activates the Hi-Pass section- Hi/Lo toggle switch selects between clean mode (lower gain) or distorted mode (higher gain)- INST/XLR switch selects input source- Pad switch (-20 dB) for the XLR input- Bypass foot switch- Status LED- Metal housing- Combo input: XLR / TRS (6.3 mm)- Outputs: XLR and 6.3 mm mono jack- Power supply with optional 9 V DC power supply unit (not included), 2.1 x 5.5 mm barrel connector, centre negative- Power consumption: 193 mA- Dimensions: (L x W x H): 120 x 110 x 60 mm- Weight: approx. 480 g- Made in USA

Switch- A / B dial footswitch- Passive way of working- Two-colour status LED- Metal housing- Input and output: 6.3 mm mono- Powered by optional 9V DC power adapter (not included), 2.1mm x 5.5 mm hollow plug, polarity (-) inside- Power consumption: less than 100 mA- Power supply only required for the status LED- Dimensions (L x W x H) 95 x 47 x 35 mm- Weight 140 g- Made in USA

Effect Pedal for Electric Guitar- Compressor- Natural vintage-style compression without sacrificing the sound- Controls: Volume, comp, EQ and blend- "Dirt" switch- Power consumption: 100 mA- Power supply via 9 V DC power supply (coaxial connection - negative pole inside, not included in delivery, matching power supply, for example, Article Nr. 409939)- Dimensions (W x H x D): 55.9 x 109 x 38 mm- Made in USA

Overdrive- Controls for volume, drive, tone and gain switch- Gain switch activates a boost mode for more low-end and higher distortion- Additional footswitch connector for gain switch- True bypass- Very transparent tone- TRS inputs and output- Operates exclusively on power supply (not included, matching power supply available under Art. Nr 409939)- Hand built in the USA

Effect Pedal DIY Kit- DIY overdrive pedal with all the necessary components- No soldering work required- Switchable JHS ‘Shamrock’ modification- True bypass- Controls: Volume, Treble, Gain- Switch: Shamrock Mod- Footswitch: Effect Bypass- Status LED- Input/Output: 6.3 mm mono jack- Current consumption: 30 mA- Power supply via 9 V DC mains adapter (2.1 x 5.5 mm barrel connector, centre negative - not included)- Metal housing- Dimensions: (L x W x H) 122 x 94 x 41 mm- Weight: approx. 408 g- Made in USA

Effect Pedal for Electric Guitar- Mini-compressor- Analogue operation- FET-based circuit- By the parallel operation, it is possible to mix the dry and the compressed signal as desired- From subtle smoothing of the sound to pleasant country squash- True bypass- Volume, compression and blend controls- Bypass footswitch- Status LEDs- Metal housing- 6.3 mm Mono jack input / output- Power supply via optional 9V DC power supply (2.1 x 5.5 mm coaxial connection, polarity (-) inside)- Power consumption less than 100 mA- Dimensions (W x D x H): 47 x 95 x 35 mm- Weight 150 g- Made in USA

Effects Pedal for Electric Guitar- Compressor- From the JHS Pedals 3 Series- Intuitive control options offer a wide range of possible sounds- Ranges from smooth smoothing to extremely compressed sounds- Bright switch activates a brighter EQ voicing- True bypass- Volume, attack, and sustain controls- Bright toggle switch- Bypass foot switch- Status LED- Metal housing- Input: 6.3 mm jack- Output: 6.3 mm jack- Power supply via 9 V DC power supply (2.1 mm x 5.5 mm barrel connector, polarity (-) inside, not included)- Current consumption: 8 mA- Dimensions (L x W x H): 112 x 60 x 31 mm- Weight: approx. 210 g- Made in the USA

To remotely enable toggle switch options of compatible effects pedals- Compatible with the JHS Morning Glory V4, the SuperBolt V2, and the Twin Twelve V2- Suitable for standard TS instrument cables- 6.3 mm jack plug- Power supply is not required- Dimensions (L x W x H): 53 x 50 x 50 mm- Weight: 100 g- Made in the USA

Effect pedal for electric guitar- Chorus / Vibrato- From the JHS Pedals 3 series- Intuitive control options offer a wide spectrum of possible sounds- Ranges from subtle doubling effect to extremely 'watered down' modulations- Vibe switch removes dry signal from signal path- True bypass- Volume, Rate, Depth, Vibe toggle switches- Bypass footswitch- Status LED- Metal housing- Input: 6.3 mm jack- Output: 6.3 mm jack- Power supply via 9 V DC power supply unit (2.1 mm x 5.5 mm barrel connector, polarity (-) inside, not included in delivery)- Power consumption: 70 mA- Dimensions (L x W x H): 112 x 60 x 31 mm- Weight: approx. 210 g- Manufactured in the USA

Effect Pedal- Multi-mode overdrive / distortion / fuzz- Combines 9 selectable Proco RAT sound modes in one pedal: OG V1, White Face V3, Turbo V5, BRAT V6, Dirty V7, LA, Landgraff MO'D, Caroline, JHS Mode- Unique switching system combines fully analogue switching with digital control for each mode- Extremely accurate replication of the individual models- True bypass- Controls for volume, distortion, filter- 9-Way selector switch for sound mode- Bypass footswitch- Status LED- Input: 6.3 mm jack- Output: 6.3 mm jack- Mains adapter connection: Hollow female plug 5.5 x 2.1 mm, negative polarity inside- Power supply via 9 V DC mains adapter (not included in the delivery)- Current consumption is less than 100 mA- Metal housing- Dimensions (L x W x H): 121 x 66 x 40 mm- Weight: approx. 350 g- Made in USA

Mute footswitch- Mutes the signal completely- Two-colour status LED- Metal housing- Input and output: 6.3 mm mono jack- Powered via optional 9V DC power supply (not included): 2.1 x 5.5 mm barrel connector, negative polarity (-) inside- Power consumption: less than 100 mA- Power supply is only necessary for the status LED- Dimensions (L x W x H): 95 x 47 x 35 mm- Weight: 130 g- Made in the USA

Effect Pedal- Chorus / Vibrato- Analog operation- Selectable bypass: True / Buffered- Tap-tempo function- Controls for Volume, Tone, Speed ​​and Depth- Toggle switch to select between chorus / vibrato modes- Toggle switch to select the effect waveform (sine / rectangle / triangle)- Internal mini switch for selecting the bypass (true / buffered)- Bypass footswitch- Tap tempo footswitch- Status LEDs- Metal housing- 6.3 mm Mono jack input- 6.3 mm TRS output (for splitting the signal in Dry / Wet)- 6.3 mm TRS expression / tap-tempo input- Power supply via 9 V DC power supply unit (2.1 mm x 5.5 mm barrel connector, polarity (-) inside - not included in delivery, matching power supply: article nr 409939)- Current consumption less than 100 mA- Dimensions (L x W x H): 127 x 66 x 54 mm- Weight: 290 g- Made in USA