Machine Heads Set For 5-String Electric Basses- Configuration: 3 + 2 (3 x left, 2 x right)- Enclosed construction- Each machine head has its own transmission ratio calibrated for the respective string- One full turn of any machine head results in a complete pitch change (+ / -)- Gear ratio: B - 48:1, E - 36:1, A - 30:1, D - 20:1, G - 18:1- Shaft diameter without mounting sleeve: 8.9 mm- Mounting diameter with mounting sleeve: 13.9 mm- Weight per machine head: approx. 52.62 g- Y-Style Contemporary knobs- Finish: Black

Set of locking machine head for electric guitar- Right-handed set- Configuration: 3x left, 3x right- Closed construction- Each machine head has its own ratio, calibrated for the respective string- A half turn of any machine head changes the tuning of the respective string by a semitone- Faster, more accurate tuning of each string- Thumbscrew on the back to clamp the string in place- Ratio: E - 12:1, B - 20:1, G - 35:1, D - 20:1, A - 24:1, E - 39:1- 2-Pin mounting- Axle diameter without assembly sleeve: 5.9 mm- Installation diameter with assembly sleeve: 9.9 mm- Vintage button- Finish: Chrome- Weight per machine head: approx. 37.75 g- Incl. 4 sets of InvisoMatch standard mounting plates to use existing screw holes

Locking Machine Heads for Electric Guitar- Right-handed set- Closed construction- Staggered posts (different shaft heights, thus no string hold-downs necessary)- Each machine head has its own ratio, calibrated for the respective string- A half turn of any machine head changes the tuning of the respective string by a semitone- Faster, more accurate tuning of each string- Locking screw on the back to clamp the string in place- Ratio: E - 12:1, B - 20:1, G - 35:1, D - 20:1, A - 24:1, E - 39:1- 6 Pieces: 6-in-Line- Bass Side (Left)- 2-Pin mounting- Axis diameter without mounting sleeve: 6.0 mm- Mounting diameter with mounting sleeve: 10.0 mm- Incl. 4 sets InvisoMatch standard mounting plates to use existing screw holes- Weight approx. 37.75 g (single)- Mini Contemporary knobs- Black finish

Set Of Machine Heads For Electric Basses- Configuration: 4 pieces; 2 x left, 2 x right- Enclosed construction- Each machine head has its own transmission ratio calibrated for the respective string- One full turn of any machine head results in a complete pitch change (+ / -)- Gear ratio per string: E - 36:1, A - 30:1, D - 20:1, G - 18:1- Shaft diameter without mounting sleeve: 8.9 mm- Mounting diameter with mounting sleeve: 13.9 mm- Weight per machine head: approx. 52.62 g- Y-Style Contemporary tuning knobs- Finish: Black

Locking Machine Heads for Electric Guitar- 6 Pieces for 3 + 3 arrangement- Incorporate string gauges in tuning equation, half turn equals half tone on each string- Quicker and more accurate tuning of each string- Thumb wheel screw on the back for locking the string- Contemporary tuning buttons- Closed construction- 2-Pin mounting- Mounting hole diameter: 9.7 mm- Axis diameter: 6 mm- Ratio E - 12:1, B - 20:1, G - 35:1, D - 20:1, A - 24:1, E - 39:1- Colour: Black- Incl. InvisoMatch standard mounting plates for the use of existing screw holes

Machine Head Set For Electric Bass- Configuration: 4-in-Line- Bass Side (Left)- Closed construction- Each machine head has its own ratio, calibrated for the respective string- One full turn of any machine head results in a complete pitch change (+ / -)- Ratio: E - 36:1, A - 30:1, D - 20:1, G - 18:1- Axle diameter without the mounting sleeve: 8.9 mm- Mounting diameter with the mounting sleeve: 13.9 mm- Weight per machine head: approx. 52.62 g- Y-Style Contemporary buttons- Finish: Black

Locking Machine Heads for Electric Guitar- 6 Pieces for 6-in-line arrangement- Bass Side/Right Hand- Incorporate string gauges in tuning equation, half turn equals half tone on each string- Quicker and more accurate tuning of each string- Thumb wheel screw on the back for locking the string- Contemporary tuning buttons- Closed construction- 2-Pin mounting- Mounting hole diameter: 9.7 mm- Axis diameter: 6 mm- Ratio E - 12:1, B - 20:1, G - 35:1, D - 20:1, A - 24:1, E - 39:1- Colour: Black- Incl. InvisoMatch standard mounting plates for the use of existing screw holes

Locking Machine Head Set for Electric Guitar- 6 Pieces- Style: 6-in-Line- Bass side/right hand- Staggered post design- String gauges were considered in gear ratio: Half a turn corresponds to 1 semitone per string- Faster, more accurate tuning of each string- Locking screw on the back for clamping the string- Contemporary buttons- Closed construction- 2-Pin assembly- Mounting hole diameter: 9.7 mm- Shaft diameter: 6 mm- Gear ratio: E - 12:1, B - 20:1, G - 35:1, D - 20:1, A - 24:1, E - 39:1- Surface: Chrome- InvisoMatch standard mounting plates included for using existing screw holes

Machine Head Set for Electric Guitar- Style: 3 + 3- String gauges are considered in gear ratio- Half a turn corresponds to 1 semitone per string- Faster, more accurate tuning of each string- Locking screw on the back for clamping the string- Vintage button- Closed construction- 2-Pin assembly- Mounting hole diameter: 9.7 mm- Shaft diameter: 6 mm- Colour: Black- InvisoMatch standard mounting plates included for using existing screw holes- E - 12:1- B - 20:1- G - 35:1- D - 20:1- A - 24:1- E - 39:1

Locking Machine Heads for Electric Guitar- 6 Pieces for 6-in-line arrangement- Bass Side/Right Hand- Incorporate string gauges in tuning equation, half turn equals half tone on each string- Quicker and more accurate tuning of each string- Thumb wheel screw on the back for locking the string- Contemporary tuning buttons- Closed construction- 2-Pin mounting- Mounting hole diameter: 9.7 mm- Axis diameter: 6 mm- Ratio E - 12:1, B - 20:1, G - 35:1, D - 20:1, A - 24:1, E - 39:1- Finish: Chrome- Incl. InvisoMatch standard mounting plates for the use of existing screw holes

Configuration: 2x left, 3x right- Enclosed construction- Each machine head has its own gear ratio calibrated for the respective string- One full turn of any machine head results in a complete pitch change (+ / -)- Fear ratio: B - 48:1, E - 36:1, A - 30:1, D - 20:1, G - 18:1- String post diameter without mounting sleeve: 8.9 mm- Mounting diameter with mounting sleeve: 13.9 mm- Weight per tuning key: approx. 52.62 g- Y-Style Contemporary tuning pins- Colour: Black

Machine Head Set for Electric Guitar- Configuration: 3 Left / 3 right- String gauges are considered in gear ratio- 1/2 Turn corresponds to 1 semitone- Faster, more accurate tuning- Locking screw on the back for clamping the string- Vintage button- Closed construction- 2-Pin assembly- Mounting hole diameter: 9.7 mm- Shaft diameter: 6 mm- Graph Tech No.: PRL-8341-G0- Colour: Gold- InvisoMatch standard mounting plates included for using existing screw holes- E - 12:1- B - 20:1- G - 35:1- D - 20:1- A - 24:1- E - 39:1

Set of Locking Machine Heads for Electric Guitar- Right-handed set- Enclosed design- Different shaft heights (staggered posts)- Each tuner has its own gear ratio calibrated for the respective string- Half a turn corresponds to a semitone- Faster, more accurate tuning of each string- Locking screw on the back for locking the string- Gear ratio: E - 12:1, B - 20:1, G - 35:1, D - 20:1, A - 24:1, E - 39:1- 6 Tuners: 6-in-line- Bass side (left)- 2-Pin mounting- Shaft diameter without mounting bushing: 6.0 mm- Mounting diameter with mounting bushing: 10 mm- Including 4 sets of InvisoMatch standard mounting plates to use existing screw holes, classic tuning knobs- Weight: approx. 37.5 g (single)- Colour: Black

Set of Locking Machine Heads for Electric Guitar- Configuration: Six left / in line- Right-handed set- Sealed design- Staggered posts (different shaft heights) - no string trees necessary- Each tuner has its own gear ratio calibrated for the respective string- Half a turn of any tuner changes the tuning of the respective string by a semitone- Faster, more accurate tuning of each string- Locking screw on the back for locking the string- Gear ratio: E - 12:1, B - 20:1, G - 35:1, D - 20:1, A - 24:1, E - 39:1- 2-pin mounting- Shaft diameter without bushing: 6.0 mm- Installation diameter with bushing: 9.8 mm- Weight per machine head: Approx. 37.75 g- Classic buttons- Finish: Chrome- Includes four sets of InvisoMatch standard mounting plates to utilise existing screw holes

Set of Locking Machine Heads for Electric Guitar- Right-handed set- Configuration: 3 left / 3 right- Enclosed design- Each tuner has its own gear ratio calibrated for the respective string- Half a turn of any tuner changes the tuning of the respective string by a semitone- Faster, more accurate tuning of each string- Locking screw on the back for locking the string- Gear ratio: E - 12:1, B - 20:1, G - 35:1, D - 20:1, A - 24:1, E - 39:1- 2-Pin mounting- Shaft diameter without mounting sleeve: 6 mm- Mounting diameter with mounting sleeve: 9.8 mm- Vintage Keystone knobs- Finish: Chrome- Weight: approx. 38 g (single)- Incl. 4 sets of InvisoMatch standard mounting plates to utilise existing screw holes

Machine Heads Set For Ukulele- Suitable for all types of ukuleles except sopranos- 6:1 Ratio especially developed for ukuleles- No static friction and no countermovement- Light composite material which guarantees a better-balanced instrument- The durable material is tested to a tensile force of over 34 kg- Suitable for most closed headstocks- Two screws mounting- A larger button than the PRU-4004-BK version- Weight per unit: 7 g- Set of 4 pieces