Boîte de scène 32x16 en réseau AVB presonus NSB 32.16Entrées et sorties là où vous en avez besoinLe boîtier de scène en réseau PreSonus® NSB 32.16 vous permet de placer les E/S analogiques de votre console numérique StudioLive® série III là où vous en avez besoin. Équipé de 32 préamplis micro XMAX à contrôle numérique, de 32 entrées symétriques de niveau ligne, de 16 sorties analogiques et de 2 sorties numériques stéréo AES3, le NSB 32.16 s\'intègre parfaitement aux mélangeurs numériques StudioLive Series III grâce à une simple connexion Ethernet. Contrôlez à distance le réglage des entrées, l\'alimentation fantôme et bien plus encore, directement depuis votre console StudioLive Series III ou le logiciel de mixage à distance UC Surface sur votre tablette ou votre ordinateur portable.Une connectivité puissante conçue pour être partagéeLe boîtier de scène en réseau NSB 32.16 est doté de 32 prises combo polyvalentes à verrouillage. Connectez vos microphones aux préamplis XMAX à commande numérique ou utilisez les entrées TRS ¼symétriques pour connecter vos appareils de niveau ligne - le NSB 32.16 peut tout gérer. Les entrées peuvent être envoyées à n\'importe quelle table de mixage numérique StudioLive Series III sur le réseau, et grâce à la compensation de gain, chaque table de mixage bénéficie d\'un contrôle de gain individuel sans affecter le mixage de façade.Boîtier de scène robuste, installation flexiblePreSonus a construit le NSB 32.16 à l\'intérieur d\'un châssis en acier robuste conçu pour résister aux rigueurs des tournées les plus exigeantes. Le NSB 32.16 est doté d\'oreilles de rack réglables, ce qui vous permet de choisir entre une installation affleurante ou encastrée, ainsi qu\'une installation d\'E/S avant ou arrière, afin de l\'adapter au mieux à votre rack. Grâce à sa conception standard 3U 19 pouces, le NSB 32.16 est également compatible avec la plupart des pochettes de scène universelles pour les installations permanentes.Une solution complète en réseauLes produits en réseau de la série III de StudioLive forment un écosystème facilement extensible et rapidement configurable. Conçus pour se renforcer mutuellement, ces produits sont à la pointe de la technologie de mise en réseau AVB. Le NSB 32.16 peut être utilisé seul ou avec de nombreux autres boîtiers de scène de la série NSB pour ajouter de l\'audio à distance à un mélangeur numérique StudioLive Series III ou à plusieurs mélangeurs sur le même réseau. Pour les consoles de mixage de la série III de la StudioLive qui disposent d\'un nombre limité d\'E/S analogiques, la NSB 32.16 permet d\'étendre facilement le système de mixage à 32 ou 64 canaux.Caractéristiques principales32x16 network stage box for StudioLive Series III console mixers36 digitally controlled XMAX mic/line inputs with gain compensation for shared streams16 line outputsEasy configuration from StudioLive Series III console mixers and UC SurfaceBuilt-in 2-port AVB switch with locking Ethernet connections for easy point-to-point and daisy-chain network configurationsRugged all-metal stage box enclosureIncluded multi-position rack earsCompatible with stage pockets from Ace BackstagePréamplificateur de microphoneType d\'entrée : XLR femelle, symétriqueRéponse en fréquence à la sortie principale (à gain unitaire) : 20-20 kHz, ±0,5 dBuImpédance d\'entrée 1 k THD à la sortie principale :

The PRM1 Precision Reference Microphone is a special type of condenser microphone that provides an accurate reproduction of a room's sound characteristics for use with audio-analysis tools such as real-time analyzers (RTAs) and spectrographs. Since it is a condenser mic, it requires phantom power. The PRM1 employs a ¼ pre-polarized electret-condenser capsule and has an omnidirectional polar pattern, meaning it is equally sensitive in all directions. This allows the microphone to measure reflections, as well as direct signals, providing an accurate depiction of the room. This mic can handle up to 132 dB SPL and exhibits linear ( flat ) frequency response between 20 Hz and 20 kHz, so it won t color the sound. The PRM1 has a narrow dynamic range, since it is intended to receive test frequencies, such as pink noise, at a fixed level. Therefore it is not recommended for recording purposes. But it s the right mic for tuning a sound system to reproduce those tracks accurately in a room. While the PRM1 can be used for a variety of measurement applications, such as MLSSA , Spectrafoo , and TEF , it is especially recommended for use with PreSonus Virtual StudioLive software with Smaart Measurement Technology and PreSonus StudioLive 24.4.2 and StudioLive 16.4.2 digital mixers. With this combination, you can have a complete, powerful, and affordable, audio-analysis and correction system. The PRM1 has an all-metal chassis and comes with a clip, foam windscreen, and hard case. FEATURES : - 1/4-inch, pre-polarized electret-condenser capsule - Linear frequency response between 20 Hz and 20 kHz - Omnidirectional polar pattern - Low noise, low distortion - All-metal chassis - Comes with a clip, foam windscreen, and hard case - High-quality components and rugged construction - Suitable for system analysis and measurement - Especially recommended for use with PreSonus StudioLive mixers and VSL with Smaart® Measurement Technology TECH SPECS : General Specifications - Type : Black electret condenser - Element : Pressure, FET preamplifier - Polar Pattern : Omnidirectional Connections - Polarity : Pin 2 output positive voltage (relative to Pin 3) when diaphragm receives positive pressure (moves inward) - Connector : 3-pin XLR Male Performance - Frequency Response : 20 Hz to 20 kHz - Sensitivity (@ 1 kHz open-circuit voltage) : -37 dB/Pa (14 mV/Pa) 1 Pa=94 dB SPL - Rated Impedance : 200Ohms - Minimum Load Impedance : 1,000Ohms - EIN (A-weighted) : 26 dB - Max. SPL (1 kOhms load) : 132 dB SPL (THD 1%, 1 kHz) - Dynamic Range (1 kOhms load) : 106 dB - S/N Ratio : 70 dB Power - Phantom Power : 9-52V - Current Consumption : 2 mA Physical - Length : 7.56 (192 mm) - Width : 0.83 (21 mm) - Weight : 5.3 oz (150g) - Finish : Metal, matte black - Environmental Conditions : 10-50 C, humidity 0-95%

PreSonus SW5E AVB switch supplies five AVB ports with secure. locking XLR Ethernet jacks. This, along with its robust construction, makes the SW5E an especially good choice for live sound systems. Network Link/Activity indicators help you ensure that network data is flowing properly. Audio networking is much more than just a way to connect a digital snake. With an AVB network, you can connect digital audio devices over long distances using CAT5e or CAT6 Ethernet cable and route your audio anywhere on the network with extremely low latency. AVB offers several unique benefits that make it a better choice for audio than other networking protocols. For example, AVB provides a high-precision clock that significantly reduces harmonic distortion and phasing, ensuring your audio stays clear and clean. AVB ensures you always have enough bandwidth to carry your low latency audio even when your intern starts streaming a movie. These important benefits are an inherent part of AVB; you don t need to do anything special to your devices or AVB switch. And you can only get them with AVB. Features Ports and Indicators - 5 Locking XLR Ethernet AVB jacks - 4 ports with PoE - PoE power indicators - Network Link/Activity indicators Switches and Power - PoE power on/off - Internal power supply with IEC connector Physical - Rugged metal chassis - Rack mountable (screws to a rack tray) General - AVB Ports: 5 Locking XLR Ethernet - PoE Ports: 4 - PoE Supported: IEEE 802.3at-2009 (Type 1) - Operational Bandwidth: 10 / 100 / 1 Gigabit - Front Panel: 5 Activity LEDs, 4 PoE active LEDs - Power: 100-230V, 50-60 Hz, 65W - Dimensions: 1.7 x 8.5 x 7 (44 x 217 x 178 mm)

Bundle offer comprising Presonus Eris E5 Active Studio Monitor Set - 5.25" (133 mm) woofer with Kevlar cone- 1"(25 mm) tweeter with silk cone- Power: Class AB power amplifiers with 45 / 35 W- Frequency range: 53 - 22,000 Hz- Gain control- Input impedance: 10 kOhm- Mid-range controls: Peak EQ, 1 kHz, +/- 6 dB- Treble controls: Cow tail filter, 4.5 kHz, +/- 6 dB- Switchable highpass filter: 80 Hz - 100 Hz- Acoustic-Space switch: -2 dB, -4 dB- Crossover frequency: 3 kHz- Maximum continuous SPL 102 dB- Input: XLR and jack (balanced) and RCA (unbalanced)- Shielded against RF interference- Switch-on delay- Output current limiting- Overheating, transient and subsonic protection circuit- Dimensions (W x D x H): 178 x 198 x 260 mm- Weight: 4.63 kg- Includes: 2 Monitors (1 pair) Swissonic M-Control + Passive monitor controller - Switchable mute- Switchable mono summation- Robust metal housing- Dimensions: 162 x 98 x 54 mm- Weight: 420 g Connections: - Input A: 2x Jack- Input B: 2x RCA and 1x 3.5 mm mini jack- Output A: 2x XLR male- Output B: 2x Mono jack and 1x stereo 3.5 mm mini jack

16 x 16 AVB - Dante Bridge- 16 x 16 AVB- 16 x 16 Dante- Use of asynchronous sampling rates possible- 1 x AVB port (etherCON)- 2 x Dante port (etherCON)- Supports 44.1 kHz and 48 kHz (AVB and Dante)- Supports 88.2 kHz and 96 kHz (Dante)- Robust metal housing- Dimensions (W x D x H): 150 x 145 x 43 mm- Weight: 0.74 kg

5-Way AVB Switch with PoE- Lockable Ethercon sockets- 4 Ports with PoE (Power over Ethernet) as well as a port for connecting additional switches- PoE standard: IEEE 802.3at-2009 Type 1- 10/100/1 Gigabit- 5 Activity LEDs- 4 PoE LEDs- Internal power supply- Combined network / PoE switch- Metal housing can be rack mounted using a rack tray (not included)- Dimensions (W x H x D): 217 x 44 x 178 mm