Effect Pedal for Electric Guitar Overdrive Limited black edition of the Centavo Faithful reproduction of the probably most sought-after overdrive The circuitry remains faithful to the vintage pedal, with carefully selected components for an authentic overdrive sound Additional "MOD" switch on the rear panel for boosting bass reproduction by changing the value of the high-pass filter Conrols: Gain, Treble, Output LED: Effect On Footswitch: Effect bypass Input and output: 6.3 mm jack Power supply connection: Barrel connector 5.5 x 2.1 mm, centre negative Power consumption: 40 mA Power supply with a 9 V battery or a 9 V DC mains adapter (not included, suitable power supply: Art. 409939) Dimensions (W x D x H): 171 x 127 x 57 mm

Warm Audio Pedal76 FET LTD Compressor; Effects Pedal for Electric Guitar; Blue Limited Editrion; Controls: 5 x (Ratio, Attack, Release, Output, Input/Comp); Push Buttons: no; Switches: 3x (GND, LEVEL, DRIVE); LED: no; Display: VU-Meter; Footswitches: Ja/Yes; Connections: Input (1/4" Jack), Balanced Output (1/4" Jack), Amplifier Output (1/4" Jack); Power Supply connector: Barrel Connector 5.5 x 2.1 mm, center negative; Current Draw: 90mA (9V) mA; powered by a 9 V DC Power Supply (not included); switchable True/Buffered Bypass; Dimensions (W x D x H): 165 x 97 x 41 mm (6,5" x 3,82" x 1,61"); Weight: 862 g (1,9 lbs); Note: Battery operation is not supported

Stereo Tube Condenser Microphone Two dual diaphragm capsules in CK12 design Upper capsule can be rotated 180º Polar pattern separately adjustable for each capsule: Cardioid, omnidirectional, figure-of-eight, plus 6 additional intermediate stages Various stereo configurations can be realized without any problems Twp TAB spark mechanisms (AMI) USA Output transformer 12AY7 vacuum tube Maixmum sound pressure level SPL: 149 dB Frequency range: 30 Hz - 20,000 Hz Output impedance: 200 ohm Signal-to-noise ratio: 73 dB Inherent noise: 22 dBA Power supply via external power supply Connection: 5 m 9-pin Gotham GAC-9 cable Dimensions of the microphone: 356 x 50 mm Microphone weight: 1.4 kg

1-Channel tube opto-compressor / limiter- 100% discrete signal path- CineMag input transformer- CineMag output transformer- 4 Premium TungSol and Electro-Harmonix tubes: 2x 12AX7, 1x 12BH7, 1x 6AQ5 (or the 6P1 - can be interchanged)- Kenetek opto attenuator- Integrated power adapter- Stereo-link capability- Balanced XLR and jack inputs - 600 ohm impedance- Balanced XLR and jack outputs - 600 ohm impedance- Frequency response: +/- 1 dB, 15 - 20,000 Hz- Gain: 40 dB +/-1 dB- Input level: +16 dB maximum- Output level: +10 dB nominal, +16 dB maximum- Distortion: less than 0.1% THD at +/-10 dBm- Attack time: 10 milliseconds- Release time: 0.06 seconds for 50% release, 0.5 up to 5 seconds for complete release- Meter for gain reduction and output- Dimensions 483 x 178 x 89 mm- Weight: 5.44 kg

1-Channel Tube Opto-Compressor- With output transformers- True to the original 270 V, 100 % discrete analogue signal path - hand-wired- Tubes: 12ax7 Tung-Sol and JJ 12au7- Frequency range @ -3 dB: 5 - 25,000 Hz- Inherent-noise:- Ratio adjustable from 2:1 to 10:1- Variable threshold from off (+20 dBU) to -40 dBU- Continuously adjustable attack and release time- 3 Different attack/release modes: fixed, manual and fix/man- Output gain: adjustable from off to +30 dBU- Balanced XLR and jack inputs and outputs- Input impedance: 600 Ohm- Two bus connectors for connecting multiple sidechains- Meter (VU) for input, output or compression- Dimensions: 483 x 184 x 89 mm- Weight: 3.9 kg

1 Channel tube EQ- With gain modification for level adjustments of two devices- CineMag input and output transformer - made in the USA- Premium 12AX7 and 12AU7 tubes- CineMag inductor EQ section- The EQ section can be set to bypass while the signal is still running through the tubes and transformers, thus keeping the "warmth" of the tube- Transformer balanced inputs and outputs (XLR and jack)- Linear frequency response from 20 – 50,000 Hz- Boost and cut can be used simultaneously to allow phase effects- Low frequency boost - 20, 30, 60, 100, 200, 400, 800 Hz - 12 dB- Low frequency cut - 20, 30, 60, 100, 200, 400, 800 Hz - 18 dB- High frequency boost - 3, 4, 5, 8, 10, 12, 16 kHz - 18 dB- High frequency cut - 3, 4, 5, 10, 20 kHz - 14 dB- 5 more additional frequency points than the EQP-1 A for greater versatility- Integrated 115 / 230 V IEC power supply- Dimensions: 19" / 2U

Ribbon Microphone With integrated 26 dB preamplifier CineMag USA transformer Powerful neodymium magnet 1.8 µm thin aluminium ribbon Switchable 26 dB preamplifier (requires phantom power) Polar pattern: Figure-8 Frequency range: 30 - 15.000 Hz ( /- 3db Maximum sound pressure level: 148 dB (1kHz=1%T.H.D) Output impedance: 300 ohm (passive), 150 ohm (active) S/N ratio: 87 dB Sensitivity (passive): -47 dBv Re. 1v/pa Sensitivity (active): : -21 dBv Re. 1v/pa Dimensions (L x D): 170 x 38 mm Weight: 0.3 kg Includes case, microphone holder and dust cover

Ribbon Microphone Stereo Pair With integrated 26 dB preamplifier CineMag USA transformer Powerful neodymium magnet 1.8 µm thin aluminium ribbon Switchable 26 dB preamplifier (requires phantom power) Polar pattern: Figure-8 Frequency range: 30 - 15,000 Hz ( /-3 dB) Maximum sound pressure level: 148 dB (1kHz=1%T.H.D) Output impedance: 300 ohm (passive), 150 ohm (active) S/N ratio: 87 dB Sensitivity (passive): -47 dBv Re. 1v/pa Sensitivity (active): : -21 dBv Re. 1v/pa Dimensions per microphone (L x D): 170 x 38 mm Microphone weight : 0.3 kg Includes case, two microphone holders and two dust protectors

FET Compressor- Analogue, discrete FET compressor- Faithful reproduction of the ‘Rev D’ FET compressor with additional features- Premium O-12 input and 5002 output transformers from CineMag USA- VU metre options: Gain Reduction, +8 dB or +4 dB- Class-A line-level output amplifier- Input impedance switchable between 600 Ohm and 10 kOhm- Dry/wet control for parallel compression- Variable sidechain high-pass filter: 30 - 300 Hz, 12 dB/octave- Active bypass for operation as a line amplifier and true bypass option for A/B comparisons- Stereo link and external sidechain input- Attack: 20 µS - 0.8 mS- Release: 50 mS - 1.1 seconds- "All-Buttons-In" setting for experimental and hard limiter tones- Frequency response: ± 1 dB 20 Hz - 20.000 Hz- Signal-to-noise ratio (SNR): 86 dB- Total harmonic distortion (THD): -64 dB (at -8 dBu)- Balanced XLR and TRS inputs and outputs- Dimensions: 483 x 90 x 159 mm- Weight: 3.7 kg

Effect Pedal for Electric Guitar- Compressor- Controls: Ratio, Attack, Release, Output, Input/Comp- Switch: GND, LEVEL, DRIVE- Display: VU Meter- Footswitch- Input: 6.3 mm jack- Balanced output: 6.3 mm jack- Preamp output: 6.3 mm jack- Power supply connection: Barrel connector 5.5 x 2.1 mm, centre negative- Power consumption: 90 mA (9V)- Power supply with a 9 V DC mains adapter (not included)- Footswitchable True/Buffered bypass- Dimensions (W x D x H): 165 x 97 x 41 mm- Weight: 862 g

2-Channel Microphone Preamp in British 1073 Style with Equaliser- Discrete Class A circuit- Carnhill transformer- 80 dB gain- Incremented potentiometer- Tone button for switching the input impedance- Switch for phase reversal- Low-cut filter 4-step switchable: 50, 80, 160, 300 Hz- 3-Band induction coil EQ low-band Boost/Cut: 35, 60, 110, 220 Hz- Mid-band Boost/Cut: 360, 700, 1600, 3200, 4800, 7200 Hz- Treble-band Boost/Cut: 10, 12, 16 kHz- Additional treble band EQ points- LED meter- 48V Phantom power- Integrated 115 / 230V power supply- Build: 19" / 2 U- 2 Microphone inputs: XLR- 2 Line inputs: 6.3 mm jack- 2 Instrument inputs: 6.3 mm jack- 2 Insert inputs and outputs: 6.3 mm jack- 2 Line outputs: XLR and 6.3 mm jack

Large Diaphragm Tube Condenser Microphone- Limited Edition- TAB-Funkenwerk (AMI) USA output transformer- Premium 5751 vacuum tube- Gotham 3 Meter GAC-7- 7-Pin tube microphone cable- Polar pattern: cardioid, omnidirectional, figure of eight + 6 intermediate stages- Inherent-noise: 11 dB (A)- Dynamic range: 130 dB A- Max. SPL: 140 dB SPL (- Frequency range: 20 Hz - 20,000 Hz- Output impedance: 200 ohm- S/N-Ratio: 82 dB(A)- WA-47T microphone- Power supply- Titanium shockmount- Gotham 7-pin cable- Wooden box- Black heavy duty flight case with individual serial number- Case dimensions (H x D): 254 x 90 mm

Large-Diaphragm Condenser Microphone- Discrete construction- Transformerless FET version of the renowned '47 classic- Gold-coated double large diaphragm- Switchable polar pattern: cardioid, ball, eight- Frequency range: 20 - 20,000 Hz- Dynamic range: 138 dB (A)- Max. SPL: 147/157 dB SPL (@ 1 kHz 1k Ohm 0.5% THD 0 / -10 dB)- Noise: 9 dB (A)- Output impedance: max. 100 ohms- Output: 16 dBu @ 1 kHz 1k ohms- 0.5% THD- LoCut: 70 Hz- Pad: -10 dB- Requires 48 V phantom power- Including elastic suspension, microphone holder and storage bag- Dimensions (Ø x length): 52 x 210 mm- Weight: 0.5 kg

4-Channel Microphone and Instrument Amplifier- 100% discrete, transformer-balanced circuit- Altran USA Custom wrapped premium input and output transformers- X520 operational amplifiers in each channel (exchangeable if required, as plugged on base)- 65 dB gain- Transmitter-balanced XLR and active instrument inputs- Transformer-balanced XLR and jack outputs- TONE switch changes the impedance of the microphone and instrument preamp from 600 to 150 ohms- -20 dB pad (affects microphone and instrument preamps)- +48 V phantom power- LED metering- Output-Trim control for precise volume control and saturation effects- Internal power supply- Format: 19 "/ 1U

2-Channel VCA Compressor- Switchable signal path with CineMag USA input and output transformer- THAT 2180 VCAs- External side chain input switchable- Switchable hi-pass filter: 30, 60, 105, 125, 185 Hz- Frequency response: 18 to 22,000 Hz- Dynamic range:> 120 dB- Input impedance: 10k ohms- Output impedance: 50 ohms- Input and output: XLR and TRS jack- Built-in power supply- Dimensions: 19"/ 1U

Effect Pedal for Electric Guitar & Bass- Phaser- An authentic recreation of one of the most sought-after phasers of the 70s, which stood out from the rest due to its flexibility; sound quality and the addition of fuzz sounds- Six modes: 2 x phase & 4 x jet- Resonance control- Slow rate control adjusts the main modulation speed, but pressing the fast/slow footswitch ramps up to maximum speed- Controls: Level, Mode, Resonance, Slow Rate- Switch: Battery/DC Adapter- Footswitch: Effect Bypass, Fast/Slow- Input: 6.3 mm jack- Output: 6.3 mm jack- Power supply connection: Barrel connector 5.5 x 2.1 mm, negative polarity inside- Power consumption: 9 mA- Powered by a 9 V battery or 18 V DC mains adapter included)- True bypass- Dimensions (W x D x H): 260 x 165 x 57 mm- Weight: 2.1 kg- Includes power supply unit