Passive DI Box- Direct injection- 2-Channel- PAD switch (0dB/-30dB)- Jack as an input connector- Balanced XLR output- Input impedance: 68 Ohm- Output impedance: 600 Ohm- Transfer ratio: 10: 1- Maximum output level: +4 dBu- 5-Years manufacturer warranty

Switch for Dynamic Microphones- Suitable as a switch for communication with technicians, as a splitter for different microphone inputs and for different zones, and more- 1 XLR input- 2 XLR outputs- With Ground / Lift switch

19" Microphone Splitter- Low-noise- 8 Balanced XLR inputs- Each to a direct output and a transformer isolated output- Combine 2 channels to double or sum the outputs- Ground lift per channel- Suitable for phantom-powered condenser microphones and DI boxes- A total of 16 XLR outputs- Dimensions: 19", 1 U- Case depth: 73 mm- Weight: 1.3 kg

Balanced Line Input Foot Switch- 2 XLR inputs- 1 XLR output- Large foot switch for switching- Channel A 0 / -15 dB switchable- Channel B 0 / -15 dB and 0 / -6 dB switchable- Gnd / Lift switched to input B- Rugged metal casing- Operation with 9 V battery- Dimensions: 100 x 60 x 120 mm

Monitor Controller Active/passive monitor controller Bluetooth compatible Adjustable headphone output Adjustable AUX volume Switchable mute Switchable mono summing Switchable PFL Input and output selector Inputs: Two balanced XLR/TRS combo sockets (stereo) and one AUX Outputs: Two balanced XLR (stereo) and one XLR (mono) Robust housing Dimensions (W x H x D): 218 x 76 x 124 mm Weight: 1 kg Colour: Black

Passive DI Box Direct Injection- 1-Channel version- PAD switch (0dB/-30dB)- Jack as an input connector- Balanced XLR output- Input impedance: 68 kOhm- Output impedance: 600 Ohm- Transmission ratio of the symmetry transformer: 10 : 1- Maximum output level: +4 dBu- Dimensions: 110 x 73 x 42 mm- 5-Years manufacturer warranty

Especially for electric guitar- Output Power: 2 x 200 W @ 4 Ohm, 2x 100W bridged @ 8 Ohm: 1x 400W @ 8 Ohm- Class D dynamic circuit- Frequency range: 20 - 20,000 Hz- Protection: soft start, short-circuit, DC, overheating, overvoltage- Controls: on/ off, volume, high, low, mode (bridge/ parallel/ stereo), ground lift, limiter sensitivity- Line input: 2x XLR and 2x 6.3 mm jack- Speaker output: 2x speaker twist and 3x 6.3 mm jack- Dimensions (W x H x D): 482 x 44 x 244 mm

Splitter Box- Press splitter 10 channel stereo / 20 channel mono- 2 Channels- Input level: +20 dB- 2 XLR inputs- Outputs: 6.3 mm jack, RCA, XLR, controls like attenuator- Ground lift- Input gain- Mic / line switch- Phones level, etc.- Powder coated steel- Internal shielded power supply- Dimensions (W x D x H): 480 x 200 x 135 mm- Weight: 9.09 kg

2-Channel Phantom power- Suitable for condenser microphones and active DI boxes- XLR in/out- Fixed power cord- LED Indicator- External phantom power- On/Off switch- Dimensions: approx.: 110 x 110 x 45 mm

Active monitor controller- For up to 3 pairs of speakers- Output 1-3 with volume controls for level adjustment of the individual monitors- Integrated talkback microphone with volume control and button- Mute, mono and adjustable dim function for the three main outputs- LED level indicator and correlation meter- 2 Stereo inputs: 6.3 mm TRS- 1 Stereo input: Switchable between RCA, 3.5 mm stereo jack and SPDIF- 3 Switchable balanced outputs- 1 CUE output- 1 Main output- Mono sum output for subwoofer or mono monitor- Main and cue direct outputs- 2 Headphone outputs with volume controls and main cue selectors- Dimensions (WDH): 254 x 215 x 84 mm- Weight: 1.5 kg

Bass Preamp- For practicing, recording and performing- For active and passive basses- 3 Sound modes: Clean, Overdrive and Fuzz- 3-Band equalizer which has been specifically tuned for bass guitar and with semi-parametric mid control- Output DI or with speaker emulation- Effects loop- Controls: Bass, Mid Level, Mid Freq, Highs, Drive, FX Blend, Saturate and Volume- Connections: Bass input with pad switch, headphones, AUX In, Bass Thru, XLR DI Out, Amp Out with ground lift, FX insert- Aluminium diecast housing- Powered with optional 9V battery or 9V DC power supply (e.g., Article Nr 409939 - not included)

Press box- Audio distributor- Electrically isolated audio splitters e.g. for press conferences and other applications- 1x XLR / f line in and 10x XLR / m out- GND lift switch per input and output- Adjustable input level with LED chain- Adjustable headphone output- Line bus input and output to cascade several devices- Design: 19", 1U- Integrated power supply- 5 Year warranty

4 Outputs - adjustable from 9 to 18V- 2 of which can be connected together with a Y-cable (not included in delivery) and deliver up to 36 V output voltage- The maximum capacity of the 9 V outputs is 300 mA, the variable outputs 500 mA- Connections: Output 1-8: 9V DC @ 300mA (individually isolated) - Output 9-12: 6-18V DC @ 500mA (individually isolated)- Dimensions: (W x D x H) 193 x 70 x 30 mm- Weight: 400 g- Included cables: 12 pieces of 5.5 x 2.1 mm coaxial plugs to 5.5 x 2.1 mm coaxial plugs