Ethernet Interface- Fully compatible with LightShark consoles- Single mode mode: RDM / DMX to ArtNet / sACN transceiver- Merger mode: where the LS-Nodes can receive different universes (via ArtNet/sACN or DMX) and merge them in the same output, being able to select HTP/LTP merge modes.- Backup mode: When LS-Node works in Backup mode with two consoles connected, the device can detect a loss of connection from the primary console and automatically switch to the backup console with a max latency of 3 seconds.- ArNet / sACN / DMX 512-A (RDM) converter / bidirectional- Web browser configuration- RMD compatible- Power over Ethernet (PoE)- 4 Universes- DMX connection: 4x XLR 5-pin female- EtherNet connection: 2x RJ 45 etherCON female- Power supply: external via USB-C or PoE- Mains voltage: 5 V or PoE- Current consumption: 2 A at 5 V- Protection class: IP20- Black metal housing- Dimensions (L x W x H): 12.9 x 10.9 x 4.2 cm- Weight: 0.5 kg

Ethernet Interface- Fully compatible with the LightShark consoles- Single mode mode: RDM / DMX to ArtNet / sACN transceiver- Merger mode: where the LS-Nodes can receive different universes (via ArtNet/sACN or DMX) and merge them in the same output, being able to select HTP/LTP merge modes.- Backup mode: When LS-Node works in Backup mode with two consoles connected, the device can detect a loss of connection from the primary console and automatically switch to the backup console with a max latency of 3 seconds.- ArNet / sACN / DMX 512-A (RDM) converter / bidirectional- Web browser configuration- RMD compatible- Power over Ethernet (PoE)- 1 Universe- DMX connection: 1x XLR 5-pin female & 1x XLR 5-pin male- EtherNet connection: 2x RJ 45 etherCON female- Power supply: external via USB-C or PoE- Mains voltage: 5 V or PoE- Current consumption: 2 A at 5 V- Protection class: IP20- Black metal housing- Dimensions (L x W x H): 12.9 x 10.9 x 4.2 cm- Weight: 0.5 kg

Playback Wing- Extension for LS-1 and LS-Core- Slightly more compact than the LS-1 console, the LS-Wing still offers enough space to hold a 12.9" iPad Pro- Coupled with an LS-1, the LS-Wing adds ten additional playback faders and 20 executor buttons to the console- In addition to the two existing DMX outputs of the LS-1 and LS-Core, the LS-Wing provides two additional DMX outputs- The Wing is connected to the console via the integrated USB hub and at the same time provides two additional USB data ports- With the additional USB charging port, another tablet can be charged- With integrated Ethernet switch- Three EtherCon ports allow the direct connection of one or more LS-nodes as well as a 3D visualization- Memory: 1,200 cuelists, 1,200 cues- Submaster / Cue Stack Fader: 10 cue stacks / submaster and / or effect speed / size fader- Playback: 10 faders (+ Option, Go, Flash)- Virtual executor page via external tablet- Power connection: Power Twist TR1- Power supply: 90-250 V 50-60 Hz- Current consumption: 1.1 A at 230 V- DMX 512 connector: 2x XLR 5 pin female- USB connection: 1x USB-B 2.0, 3x USB-A 2.0 (2x Dataport & 1x charging socket for external tablet)- Lamp connection: 1x XLR 3 pin female- EtherNet connection: 3x RJ 45 etherCON (Gigabit)- Dimensions (L x W x H): 32.5 x 33 x 9.4 cm- Weight: 2.7 kg

Gooseneck Lamp- For LS-1 Console and LS Wing- The desk lamp can be dimmed in 3 steps and switched on/off via the switch- Angled 3-pin XLR connector- Power supply: 5 V DC- Length: 520 mm