Eurorack Module- Kick Drum Module- Dual Drive options: Fold for saturation or high gain distortion with clipping- Amplitude envelope with reverse switch- CV control over various parameters including V/Oct pitch input- Dynamic phrasing via velocity input- Pitch locking functionality converts pitch potentiometer into an octave switch- Gate mode- Switchable 30Hz 3-pole high-pass filter- Memory and recall function for panel parameters- Select bus compatibility with 16 presets- Trigger CV input- Drive CV input- Decay CV input- Envelope output- Velocity CV input- Click CV input- Pitch CV input- Rubberised Djtechtools rotary knobs- Power requirement: 85mA (+12V) / 10mA (-12V)- Width: 8 HP- Depth: 21 mm

Eurorack Module- Dual adder / differentiator- 2 Inputs per channel, sum and difference output- Suitable for audio and CV signals- Current consumption: 15 mA (+12 V) / 15 mA (-12 V)- Width: 2 TE- Depth: 40 mm

Eurorack Module- Programmable 4-channel quantizer- 80 Programmable scales per each channel- 8 Different scales / harmonies directly accessible via knobs and CV input- Programmable micro tuning functionality- Arpeggiator with 5 playing modes- Octave transposition (+/- 3 octaves)- Tuning per output switchable between V/Oct, Hz/V and 1.2 V/Oct- CV input / output per each channel- CV input for transposition- Gate input- Trigger output- Current consumption: 60 mA (+12 V) / 10 mA (-12 V)- Width: 10 TE- Depth: 29 mm

Eurorack Module Four-channel attenuator/recorder with fader Four inputs and outputs for CV and audio signals (-10 V to 10 V) Recording time up to 81 seconds per channel Mixer function (standardised outputs) Three sync modes: Free, clock rate or quantised (with automatic beat length detection) Adjustable offsets for input normalisation and selectable linear or logarithmic fader response Sample and hold function Click CV input Reset input Assignable gate outputs for channels 1-4 Function, direct/load, erase/save buttons Memory locations for 16 presets Select bus compatibility Power requirement: 75 mA ( 12V) / 45 mA (-12V) Width: 12 HP Depth: 27 mm

Eurorack Module- Hi-Hat and percussion synthesiser and noise generator with hybrid sound generation- Digital sound source with 13 selectable algorithms (noise, sine, bell, metal, FM, 808, 909, grains and more) and external mode for processing external signals through the analogue signal path- Digital effects section with 9 selectable algorithms (Ring Modulation, FM, Comb Filter, Sample Rate Reducer and more)- VCA (voltage controlled amplifier) with decay envelope- Analogue multimode filter with resonance and additional low-cut filter- Analogue gain and distortion stage- Controls for decay, filter, effect and tune - each with CV input- Trigger button and trigger inputs for open hi-hat and closed hi-hat- CV inputs for velocity and preset selection- Memory locations for 96 presets and randomiser function- Compatible with Select Bus protocol- Power requirement: 105 mA (+12V) / 45 mA (-12V)- Width: 8 HP- Depth: 21 mm

Eurorack Module- Clock source module with four different outputs- 2 Clock outputs- Reset output- Accent output with 27 different patterns- MIDI input- Adjustable swing factor- Humanise and random function- Memory locations for 16 presets- Select bus compatibility- Transport button with start/pause, stop, reset and tap tempo- Options menu- Power requirement: 55mA (+12V) / 0mA (-12V)- Width: 6 HP- Depth: 27 mm

Eurorack Module- Dual Stereo Filter- Calibrated low-pass and high-pass filters per channel- Controls for low-pass and high-pass frequency and common (switchable) resonance control- Switchable bandpass mode- Panorama CV input per channel- CV inputs for both filter frequencies and resonance- 2 Audio inputs and outputs- Current consumption: 60 mA (+12 V) / 90 mA (-12 V)- Width: 6 HP- Depth: 29 mm

Eurorack Module Dual Step CV/Gate Recorder, consisting of a sequence recorder, a CV/Gate processor and a (Re)Generative Engine Process section: Glide, ratchet, pitch modulation and gate length (Re)Generative algorithms for sequence generation and transformation Editing options: Duplicate, move, reverse, copy sequences SD card slot for saving and loading recorded sequences Tracker-like grid for arranging sequences in songs or live sets Firmware update via SD card Four assignable CV inputs Select bus compatibility Djtechtools rubberised rotary control Skiff-compatible Power requirement: 70 mA ( 12 V) / 5 mA (-12 V) Wdith: 14 HP Depth: 29 mm

Eurorack Module- Expander for Bard Quartet (item 533980 - not included)- Expands Bard Quartet by 3 gate inputs, 3 trigger outputs, MIDI input (3.5 mm TRS, type A) and MIDI button- Control of all 4 channels via MIDI possible (input of chord progressions and editing of scales)- Power consumption: 5 mA ( 12 V) / 5 mA (-12 V)- Width: 2 U- Depth: 40 mm

Eurorack Module- 3-Channel envelope generator- Per channel: Attack/decay envelope, adjustable via the Time (total time) and Symmetry (attack/decay ratio) controls- 5 Selectable modes per channel: AD envelope, ASR envelope, looped, gated loop and clocked loop with clock divider- Envelope shape switchable from linear to exponential- CV input- Assignable to three selectable parameters- Output voltage adjustable from 0 V to 8 V- Per channel: Gate input, CV input for time, envelope output- Power consumption: 40 mA ( 12 V) / 8 mA (-12 V)- Width: 8 U- Depth: 21 mm

Eurorack Module- Wave warping tool- Combines crossfader, waveshaper, distortion and ring modulator in one module- Suitable for manipulating audio signals and control voltage (selectable with AC/DC switch)- Crossfader for crossfading input 1 and 3 or ring modulation of input 1 and 2- Shape section, switchable between waveshaper or distortion- 3 Signal inputs, mix and shape outputs- Separate input for shape section- CV inputs for mix and shape, each with attenuator- Power consumption: 75mA ( 12V) / 65mA (-12V)- Width: 6 U- Depth: 21 mm

Eurorack Module- Euclidean 4-channel LFO- 4 LFOs triggered in correlation to each other or independently from internal Euclidean sequencers- Adjustable sequencer parameters: Length (1-16 steps), Density and Shift- 8 Selectable sequence tables- Symmetry and Shape controls for setting the LFO waveform- 4 Correlation modes (Main, Compute, Random, Phase) selectable or independent setting of all parameters per channel possible- Tap tempo- Adjustable clock divider per channel- Gate input with 8 selectable functions (Ratchets, Track & Hold, One-Shot)- Assignable VCA CV input- Clock and reset inputs- Bipolar CV inputs for length, density, shape and symmetry- 4 Unipolar or bipolar LFO outputs- Power consumption: 55mA (+12V) / 30mA (-12V)- Width: 12 U- Depth: 21 mm

Eurorack Module- Analogue VCO with digital control- Through-Zero frequency modulation and phase modulation- Shape control for crossfading from sine to triangle and sawtooth to square/pulse- Shape CV input with an attenuator that also serves as a waveshaper- Adjustable sub-oscillator, switchable from -1 to -2 octaves- Controls for coarse and fine-tuning and switchable octave mode- Hard-sync and soft-sync selectable- Switchable LFO mode- Disorder mode modulates the VCO core with a digital random voltage (suitable for atonal sounds and drum sounds)- Pitch input (1V/oct.) and linear FM input- CV inputs for all parameters- Vari output with mix of shape waveform (with square wave or PWM) and sub-oscillator- Pulse, sawtooth and sine outputs- Power consumption: 92mA ( 12V) / 52mA (-12V)- Width: 8 U- Depth: 21 mm

Eurorack Module- Modulation Preset Manager- Configurable modulation source with 4 channels- Each channel can take over one of 15 functions (e.g. LFO, envelope, offset, random)- Memory for 16 scenes- Scenes can be selected by CV or clock signal and manually- Triggering of envelopes and LFOs via gate input- Per channel: status LEDs and parameter controls (e.g. LFO frequency, envelope time, offset value, etc.)- Compatible with Select Bus protocol- Current consumption: 65 mA (+12 V) / 10 mA (-12 V)- Width: 12 HP- Depth: 29 mm

Two-channel clock divider- Selectable divisor and status LED for both channels- Clock and reset inputs- Divider output per channel- Further configurations (chain, auto reset, trigger/gate) via jumpers on the rear side- Power consumption: 10 mA (+12 V) / 0 mA (-12 V)- Width: 14 HP- Depth: 22 mm- Intellijel 1U format

Eurorack Module- Four-channel high-pass filter- 4 Sections with 2 identical filters each- Section 1 & 2: 30 Hz (-18 dB/oct.)- Section 3 & 4: 100 Hz (-18 dB/oct.)- Input and output per section- Current consumption: 15 mA (+12 V) / 15 mA (-12 V)- Width: 2 HP- Depth: 40 mm

Eurorack Module- Dual multi-type gate- 2 Independent channels with analogue signal path- Selectable operating modes per channel: low-pass, band-pass and high-pass filter with mild or aggressive resonance characteristics- Low pass gate with adjustable level boost- VCA with adjustable distortion and feedback- Control for frequency/level- CV (unipolar / bipolar switchable) and resonance/feedback- Switchable vactrol simulation and adjustable input gain with overdrive- CV inputs for all parameters- Serial or parallel operation and link function selectable- Compatible with Select Bus protocol- Power requirement: 190 mA (+12V) / 150 mA (-12V)- Width: 12 HP- Depth: 21 mm

Eurorack Module- A quadraphonic Mixer- Unity Mixer with 3 quadrophonic inputs and 2 stereo inputs- Normalised inputs allow all 5 input channels to process mono and stereo signals- 4 Main outputs, centre and sum output- Configurable for 5.1 applications- Current consumption: 25 mA (+12 V) / 25 mA (-12 V)- Width: 6 TE- Depth: 40 mm

Shakmat Modular Ballista Blast Expander; eurorack module; modulation expander for Shakmat Ballista Blast; dedicated and preset-recallable modulation source; switchable between Envelope and LFO; controls for Shape/Attack, Time/Decay and Depth; Envelope modes: AR, AD and ASR; LFO modes: Free, Synced, Clocked and Both; six modulation destinations: Harmonics, Emphasis, Parameter, Pitch, Amplitude and one freely assignable destination; modulation shapes: linear and exponential (envelope), skewed ramp, symmetrical waves, random (sample & hold) and sequences; three CV inputs for Shape/Attack, Time/Decay and Depth (-5V to +5V); clock/trigger input (0 – 5V); activity LEDs; all settings stored and recalled with Ballista Blast presets; supports up to two expanders per Ballista Blast; passive design; width: 4HP; depth: 21mm

Eurorack Module- Hybrid synthesizer voice with a digital oscillator core (16-bit / 48 kHz) and an analogue signal path- Three synthesis engines: Classic, Wavetable and FM- Wavetable engine with 32 wavetables, each containing eight waves, including user import via microSD- FM engine with seven algorithms- Four main controls: Harmonics, Emphasis, Parameter and Pitch- Built-in, assignable envelope with attack/decay and AR, AD, ASR and Loop modes- Assignable modulation sources: Envelope, gate-triggered randomiser and velocity- Analogue filter types: 2-pole low-pass, band-pass and high-pass, as well as 4-pole low-pass- VCA/LPG modes: Envelope, Gate and Drone- Two types of distortion- Display for menu navigation and preset management- Memory locations for 256 presets- microSD slot for firmware updates, presets and user wavetables- Can be expanded with up to two optional Ballista Blast Expanders- CV inputs for V/Oct, Harmonics, Emphasis, Parameters, Pitch, Attack, Decay, Preset selection, and a freely assignable CV input- Gate and velocity input (0–5 V)- Mono audio output- Power consumption: 135 mA (+12V) / 45mA (-12V)- Width: 12 HP- Depth: 29 mm