Modular Synthesizer Effect Pedal 10th Anniversary Black Limited Edition Five synthesizer modes, including mono, polyphonic and dry processing, polyphonic pitch recognition without special pickup Synthesizer playable via instrument input or MIDI keyboard Six fully polyphonic voices available simultaneously ADSR envelope generators for amplitude and filter Configurable oscillator and filter types SAW, TRIANGLE and SQUARE waveforms selectable per oscillator with cross-modulation Intuitive, award-winning colour screen-based user interface modelled on LVX and MercuryX Expressive hold modifier switch for spontaneous control 99 preset memory locations in 33 banks Favourite Preset Bank for instant access to three favourite presets Instant access tuner with configurable reference and output mode Deep modifier section enables routing of control signals to processing parameters New processing elements, including Meri's own flanger and phaser Digitally controlled analogue mix bus Switchable input/output headroom level for instrument or synthesiser/line level MIDI In and Out via standard MIDI DIN sockets Assignable expression pedal control for several parameters simultaneously MIDI implementation for continuous control parameters MIDI preset send and receive MIDI Beat Clock Synchronisation Advanced ARM processor High-quality analogue signal path and 24-bit AD/DA with 32-bit floating-point DSP High-quality JFET input section from Analog Devices Dimmable display and logo lighting Controls: Pitch, Filter, Level, Controller 1, Controller 2, Controller 3 (Preset/Pages/Save) Four LED buttons (preset bypass and hold modifier function for desktop users) Four footswitches Inputs and outputs: 2 x 6.3 mm mono jack each (true stereo) Expression pedal input: 6.3 mm jack MIDI IN and MIDI THRU connections: 5-pin DIN USB-C connection (for firmware updates only) Power consumption: 300 mA Power supply via 9 V DC mains adapter (2.1 x 5.5 mm barrel connector, centre negative - not included) Metal housing Dimensions (L x W x H): 184 x 114 x 51 mm Weight: 680 g Colour: Black Made in USA Note: Battery operation is not supported.

Effect Pedal for Electric Guitar- Reverb- Modular reverb system architecture- 8 Custom Meris Reverbs: Ultraplate, Cathedral, 78 Room, 78 Plate, 78 Hall, Spring, Prism and Gravity- Extended 2.54 s stereo predelay with modular feedback routing position- Advanced ARM processor- Configurable reverb structures, types and processing elements for a wide range of customisation possibilities- Intuitive user interface based on a colour display- Expressive Hold Modifier switch for spontaneous control- 99 Preset locations in 33 banks- Favorite Preset Bank for direct access to three selectable presets- Built-in instant access tuner with configurable reference and output modes- Deep Modifier Section allows routing of control signals to processing parameters- New independent stereo freeze together with reverb- Gate envelope controls for each reverb type- New processing elements like 79 Chorus, Vibrato, Vowel Mod, Tremolo, Hazy Lo-Fi and more- Selectable note divisions for each side of the stereo predelay- Digitally controlled analogue mix bus- Switchable input / output headroom level for instrument or line level- Assignable expression pedal control for multiple parameters simultaneously- Transmit and receive MIDI presets- MIDI Beat Clock Synchronisation- High-quality analogue signal path and JFET input section- Screen and logo brightness dimmable- 24-Bit A/D and D/A conversion- 32-Bit Floating Point DSP- Controls for Decay, Predelay, Mod, Mix, Control 1, Control 2, Control 3 (Save)- 4 LED buttons (preset bypass and hold modifier function for desktop users)- 4 Foot switches- Metal housing- 2 x 6.3 mm mono jack input / output (true stereo)- 6.3 mm expression pedal input- MIDI IN and MIDI THRU connectors (5-pin DIN)- USB-C connection (for firmware updates only)- Power supply with optional 9 V DC power supply unit (not included), 2.1 x 5.5 mm barrel connector, centre negative- Power consumption: 300 mA- Dimensions (L x W x H): 184 x 114 x 51 mm- Weight: 680 g- Made in USA

Effect Pedal For Electric Guitars- Delay / Looper- Modular delay system architecture- 2540 ms Fully configurable dual delay- Configurable delay structures and types as well as signal processing elements for fully customisable delay processing- Intuitive user interface based on a colour display- True stereo 60-second looper (always available)- 99 Preset locations in 33 banks- Favorite Preset Bank for direct access to 3 favourite presets- Built-in instant access tuner with configurable reference and output mode- Deep Modifier Section allows routing of control signals to processing parameters- True stereo processing elements with completely new designs and familiar elements from the Meris family (Polymoon, Hedra, Enzo and Ottobit Jr.)- Selectable note divisions for each side of the stereo dual delay- Digitally controlled analogue mix bus- Switchable input / output headroom level for instrument or line level- Assignable expression pedal control for multiple parameters simultaneously- MIDI preset send and receive- MIDI beat clock synchronisation- High-quality analogue signal path and JFET input section- Screen and logo brightness dimmable- 24-bit A/D and D/A conversion- 32-bit Floating point DSP- Sample rate: 48,000 Hz- Frequency range: 20 - 20,000 Hz- Selectable true bypass (Relay) or analogue buffered bypass- Controls for: Time, feedback, mod, mix, control 1, control 2, control 3 (Save)- 4x LED buttons - preset bypass and tap function for desktop users- 4x Footswitches - bypass, looper control, tap- Metal housing- 2x Inputs: 6.3 mm mono jack (true stereo)- 2x Outputs: 6.3 mm mono jack (true stereo)- Expression pedal input: 6.3 mm- MIDI IN and MIDI THRU connectors: 5-pin DIN- USB-C connector, only for firmware updates- Power adapter connector: Hollow female plug 5.5 x 2.1 mm, negative polarity inside- Power supply via 9 V DC mains adapter is not included in the delivery- Power consumption: 300 mA- Dimensions (L x W x H): 184 x 114 x 51 mm- Weight: 680 g- Made in the USA

Microphone preamp for recording guitar- Up to 60 dB gain at the input section- -27 dB to 12 dB Output Trim- Post effect grinding path- Selectable high-pass filter: 80 Hz / 200 Hz- Selectable high-shelf filter: 7000 Hz / 4000 Hz- Frequency response: 20 to 2000 Hz flat (all filters deactivated)- 100% Analog signal path- Controller for gain and output- -20 dB Pad toggle switch for high-level input signals- Phase toggle switch to reverse the signal phase- 48 V toggle switch to enable phantom power- High-shelf toggle switch to select the high-shelf filter frequency- High-pass toggle switch to select the high-pass filter frequency- Status LED for 48 V phantom power- Metal housing- 2 Front-side 6.3 mm mono-pin (send / return) connections- Return socket can be used as DI input (post filters, pad and phase reversal)- For mounting in racks of the 500 series- Made in USANote: Register your product at www.w-distribution.com/Warranty and extend the warranty to 4 years.

Reverb- Pedal version of the Meris 500 Series Mercury7- 2 Reverb algorithms- Separate controls for interaction of high and low frequencies with the reverb algorithm- Up to 16 presets via MIDI- 24 Bit AD/DA with 32 bit floating point DSP- Selectable bypass (True/Relay Bypass or Buffered)- Selectable Reverb Trails- Switchable headroom for guitar/line level input level- Auto Swell Envelope function- Analogue signal path- MIDI in/out/preset selection/external tap tempo available via EXP socket- Analogue wet/dry mix- Presets via external 4-preset switch or MIDI selectable- Space Decay, Modulate, Mix, Lo Frequency, Pitch Vector and Hi Frequency controls- Alt (Hold) button for activating alternative controller functions- Algorithm Select button to select the reverb algorithm (Ultraplate/Cathedra)- Bypass footswitch- Swell footswitch- Status LEDs- Metal housing- 6.3 mm TRS input jack (switchable stereo/mono)- 2x 6.3 mm mono jack (L/R) outputs- 6.3 mm TRS Exp/Tap Tempo/External Footswitch/MIDI jack- Power supply via 9 V DC power adapter with 2.1 mm x 5.5 mm barrel connector, polarity (-) inside (power adapter not included)- Current consumption: 150 mA- Dimensions (L x W x H): 115 x 107 x 67 mm- Weight: 410 g- Made in USA

Effects Pedal- Delay- 1,200 ms delay time- Tap Tempo function- 6 Custom LFO waveforms- Up to 16 presets via MIDI- 24 bit AD / DA with 32 bit floating point DSP- Selectable bypass (True / Relay Bypass or Buffered)- Selectable delay trails- Switchable headroom for guitar / line level input level- Tempo Syncable Stereo Barberpole Phaser- Dynamic stereo flanger- Expression control of all effect parameters possible (also simultaneous)- MIDI in / out / preset selection / external tap tempo available via EXP jack- Analogue signal path for wet / dry mix- Presets via external 4-Preset switch or MIDI selectable- Controls for Time, Feedback, Mix, Multiply, Dimension and Dynamic- Alt (Hold) button to enable alternative controller functions- Phaser Select button to select the reverb algorithm (Sync Phase & Slow)- Bypass footswitch- Tap footswitch- Status LEDs- Metal housing- 6.3 mm TRS input jack (switchable stereo / mono)- 2 x 6.3 mm mono latches (L / R) outputs- 6.3 mm TRS Exp / Tap Tempo / External Footswitch / MIDI Jack- Power supply via 9 V DC power supply unit with 2.1 x 5.5 mm barrel connector and polarity (-) inside (not included in delivery)- Current consumption:- Dimensions (L x W x H): 115 x 107 x 67 mm- Weight: 410 g- Made in USA

Modular Synthesizer Effect Pedal 5 Synthesizer modes, including mono, polyphonic and dry processing, polyphonic pitch recognition without special pickup Synthesizer playable via instrument input or MIDI keyboard 6 fully polyphonic voices available simultaneously ADSR envelope generators for amplitude and filter Configurable oscillator and filter types SAW, TRIANGLE and SQUARE waveforms selectable per oscillator with cross-modulation Intuitive, award-winning colour screen-based user interface modelled on LVX and MercuryX Expressive hold modifier switch for spontaneous control 99 preset memory locations in 33 banks Favourite Preset Bank for instant access to 3 favourite presets Instant access tuner with configurable reference and output mode Deep modifier section enables routing of control signals to processing parameters New processing elements, including Meri's own flanger and phaser Digitally controlled analogue mix bus Switchable input/output headroom level for instrument or synthesiser/line level MIDI In and Out via standard MIDI DIN sockets Assignable expression pedal control for several parameters simultaneously MIDI implementation for continuous control parameters MIDI preset send and receive MIDI Beat Clock Synchronisation Advanced ARM processor High-quality analogue signal path and 24-bit AD/DA with 32-bit floating-point DSP High-quality JFET input section from Analog Devices Dimmable display and logo lighting Controls: Pitch, Filter, Level, Controller 1, Controller 2, Controller 3 (Preset/Pages/Save) 4 LED buttons (preset bypass and hold modifier function for desktop users) 4 footswitches Inputs and outputs: 2 x 6.3 mm mono jack each (true stereo) Expression pedal input: 6.3 mm jack MIDI IN and MIDI THRU connections: 5-pin DIN USB-C connection (for firmware updates only) Current consumption: 300 mA Power supply via 9 V DC mains adapter (2.1 x 5.5 mm barrel connector, centre negative - not included) Metal housing Dimensions (L x W x H): 184 x 114 x 51 mm Weight: 680 g Made in USA Note: Battery operation is not supported.

Bit Crusher / Sample Reduction / Step Sequencer- Pedal version of the Meris 500 series Ottobit- 2 Sequencer types: Pitch Seq / Filter Seq- Sample reduction from 48 kHz to 48 Hz- Bit Depth Reduction from 24 to 1 bit- Up to 16 presets via MIDI- 24 Bit AD / DA with 32 bit floating point DSP- Selector Bypass (True / Relay Bypass or Buffered Bypass)- Switchable headroom for guitars / line level input levels- Tap Tempo function- Analog signal path- MIDI In / Out / Preset selection / external Tap Tempo available via EXP jack- Analog wet / dry mix- Presets selectable via external 4-preset switch or MIDI- Controls for sample rate, filter, bits, stutter, sequencer, sequencer mult- Alt (hold) button for activating alternative controller functions- Sequencer Type button to select between Pitch Seq / Filter Seq- Bypass foot switch- Tap foot switch- Status LEDs- Metal housing- 6.3 mm TRS input - stereo / mono switchable- 2x 6.3 mm mono jack (L / R) outputs- 6.3 mm TRS Exp / Tap Tempo / external foot switch / MIDI jack- Power supply with 9 V DC power supply (2.1 mm x 5.5 mm coaxial connection, polarity (-) inside, not included)- Current consumption- Dimensions (L x W x H): 115 x 107 x 67 mm- Weight: 410 g- Made in USA

2 Reverb algorithms- Separate controls for the interaction of high and low frequencies with the Reverb algorithm- 24 bit AD / DA with 32 bit floating point DSP- Switchable headroom for guitar/line level input levels- Auto Swell Envelope function- 100% analog bypass- Analogue wet/dry mix- Controls for Space Decay, Modulate, Mix, Lo Frequency, Pitch Vector and Hi Frequency- Alt (Hold) / Algorithm Select button to select between the reverb algorithms (Ultraplate / Cathedra) and activation of the alternative controller functions- Bypass switch- Swell switch- Status LEDs- Metal housing- For mounting in racks of the 500 series- Made in USA

Effect Pedal for Electric Guitar- Pitch shifter- 3 Harmony voices / delay lines with rhythmic time offset- Tap Tempo function and synchronisation- 12 Diatonic harmonies and chromatic pitch shifting- Up to 16 presets via MIDI- 24 Bit AD / DA with 32 bit floating point DSP- Switchable headroom for guitar/line input level- Tap Tempo functionality with separate temp increases for each voice- Expression control possible for all effect parameters (also simultaneous)- MIDI in / out / preset selection / external tap tempo available via EXP socket- Analogue signal path for wet / dry mix- Presets via external 4-preset switch (Meris Preset Switch, not included) or MIDI selectable- Selectable bypass (True / Relay Bypass or Buffered)- Key, Micro Tune, Mix, Pitch 1, Pitch 2, and Pitch 3 knobs- Alt (Hold) button for activating alternative controller functions- Mode Button for selecting the delay line arrangement (Dual / Dual + Series / Series / Pitch Feedback)- Bypass footswitch- Tap footswitch- Status LEDs- Metal housing- 6.3 mm TRS input jack (switchable stereo / mono)- 2x 6.3 mm mono latches (L / R) outputs- 6.3 mm TRS Exp / Tap Tempo / External Footswitch / MIDI Jack- Power supply via 9 V DC power supply unit with 2.1 x 5.5 mm barrel connector and polarity (-) inside (Power adapter not included)- Current consumption: 150 mA- Dimensions (W x D x H): 107 x 115 x 67 mm- Weight: 410 g- Made in USA

Preset footswitch for Meris Pedals- Easily save and access up to 4 presets on each Meris pedal- Instantaneous preset switching- Connection with a single TRS cable (included)- Control multiple pedals with a simple Y-cable (not included)- Fits exactly 2 Meris pedals- Internal PCB socket for Arduino DIY Midi projects (Arduino microcontroller not included)- No power required- Dimensions (W x D x H): 216 x 57 x 51 mm- Weight: 285 g- Incl. 1 TRS flat cable with 30 cm length

Effect Unit- 500 Series- 3-Voice Rhythmic Pitch Shifter effect module- Selectable pitch correction types and melodies to edit in real time- Individual control of pitch and time delay of the three voices- Micro Tune control creates smooth chorus-like detuning- Classic studio saturation and extreme distortion- 520 ms tap tempo delay with selectable pitch feedback- Glide Mode glides between pitches at the selected speed- 24 bit AD/DA with 32 bit floating point DSP hardware- 100% analogue bypass- Controls for Key, Mix, Micro Tune, Pitch 1, Pitch 2, Pitch 3- Tap / Alt (Hold) buttons for Tap Tempo and alternative control functions- Pitch feedback button- Bypass button- Status LEDs- Metal housing- For mounting in 500 series rack / lunchbox modules

MIDI I/O Interface- Compact, pedalboard-friendly MIDI I / O for up to 4 MERIS pedals- Allows full control of all parameters via MIDI- Supports MIDI inputs and outputs of all MERIS pedals- Allows unlimited offline preset saving and loading- Wireless compatibility with Bluetooth MIDI adapter- MIDI In and Off activity status LEDs- 9 V DC Power supply (not included - suitable power supply unit: Article number 409939)- Power consumption: 10 mA- Dimensions (W x D x H): 94 x 66 x 38 mm- Weight: 185 g- Includes 1x Flat TRS cable with 30 cm length