| Rode : NT5 S Bundle (24 comments)
Rode NT5 S True Condenser Microphone-
With gold sputtered 1/2" diaphragm-
Cardioid-
Satin nickel finish-
Very low noise-
Full frequency response-
Active electronics: JFET impedance converter-
Frequency range: 20 Hz to 20 kHz-
Sensitivity: -38 db at 1v / Pa + -2 dB-
Maximum output: +13.9 dBu...(+) Rode NT5 S True Condenser Microphone-
With gold sputtered 1/2" diaphragm-
Cardioid-
Satin nickel finish-
Very low noise-
Full frequency response-
Active electronics: JFET impedance converter-
Frequency range: 20 Hz to 20 kHz-
Sensitivity: -38 db at 1v / Pa + -2 dB-
Maximum output: +13.9 dBu-
Dynamic range: >128 dB-
Signal to noise ratio: 78 dB-
Weight: Microphone 100g-
Phantom power required (18V - 48V)-
Including windshield, tripod adapter and case-
Including 10 years manufacturer warranty K&M 27105 Microphone stand Thomann Type I-
Plastic base-
Height is adjustable from 900 to 1600 mm-
Boom arm: 810 mm-
Weight: 2.3 kg-
Colour: Black Cordial CAM 9 BK Professional Microphone Cable-
Length: 9 m-
Original Neutrik NC 3 FXX-BAG + NC 3 MXX-BAG XLR plugs-
Cable type: CME 220 Black-
Thomann hook-and-loop fastener included-
Colour: Black |
|
| Rode : Stereo Bar SB20 (337 comments)- For tripod mounting of two microphones- Material: Robust ABS- Precise angle and distance markers for positioning the microphones according to ORTF, XY or small AB- Two slidable 3/8" threads- Spacer can be used above or below- Dimensions (H x W x D): 170 x 240 x 70 mm- Weight: 45 g- Colour: Black |
|
| Rode : NTK (42 comments)- Gold plated large diaphragm- Very low noise level- Wide frequency range- Hand-selected twin-triode valve- Incl. power supply and RM2 microphone flange with ring holder |
|
| Rode : WS11 (14 comments)- Foam mesh on the inside and synthetic fur on the outside- Acoustically transparent- Protects against noise up to approx. wind force 5 during outdoor recordings- Dimensions (L x D): 125 x 85 mm- Weight: 21 g |
|
| Rode : PG1 (9 comments)- For Rode VideoMic or stereo VideoMic- 3/8" thread |
|
| Rode : K2 Bundle (10 comments)
Rode K2 Tube Microphone-
With infinitely adjustable pattern-
Frequency spectrum: 20 - 20,000 Hz-
Impedance: 200 Ohm-
Sensitivity: -36 dB re 1V/Pa (16 mV @ 94 dB SPL) +/-2 dB-
Includes SM6 elastic mount with pop shield and ZP1 leatherette carrying case pro snake TPM 10 Professional microphone ca...(+) Rode K2 Tube Microphone-
With infinitely adjustable pattern-
Frequency spectrum: 20 - 20,000 Hz-
Impedance: 200 Ohm-
Sensitivity: -36 dB re 1V/Pa (16 mV @ 94 dB SPL) +/-2 dB-
Includes SM6 elastic mount with pop shield and ZP1 leatherette carrying case pro snake TPM 10 Professional microphone cable-
Length: 10 m-
Black Yongsheng XLR plug (made by Neutrik)-
XLR male --> XLR female-
Incl. hook and loop fastener |
|
| Rode : RODELink LAV (7 comments)
- Miniature condenser capsule with omnidirectional directional characteristic- Kevlar-reinforced connecting cable (1.2 m)- 3.5 mm locking TRS connector- Broadcast quality sound- Frequency response: 20 - 20,000 Hz- Sensitivity: 21 mV/Pa- SPL (sound pressure level): 110 dB- Power supply: Plug-in power...(+) - Miniature condenser capsule with omnidirectional directional characteristic- Kevlar-reinforced connecting cable (1.2 m)- 3.5 mm locking TRS connector- Broadcast quality sound- Frequency response: 20 - 20,000 Hz- Sensitivity: 21 mV/Pa- SPL (sound pressure level): 110 dB- Power supply: Plug-in power (2 to 5 V)- Dimensions: 12 x 4.5 x 4.5 mm- Includes a foam pop shield, mounting clip and a storage bag |
|
| Rode : DeadWombat (8 comments)- For Rode Blimp- Spare part |
|
| Rode : PodMic W
- Rode PodMic W; dynamic speaker and Recording microphone; polar pattern: cardioid; optimised for speech applications; frequency range: 20 Hz 20 kHz; dual-layer steel mesh; internal pop shield; solid brass construction with hard-wearing ceramic finish; integrated swing-mount; XLR output connector;...(+) - Rode PodMic W; dynamic speaker and Recording microphone; polar pattern: cardioid; optimised for speech applications; frequency range: 20 Hz 20 kHz; dual-layer steel mesh; internal pop shield; solid brass construction with hard-wearing ceramic finish; integrated swing-mount; XLR output connector; color: white; dimensions: 172 x 109 x 62mm; weight: 937 g |
|
| Rode : Cable f. NTK und K2 (1 comments)- For NTK and K2 Tube Mic- 7-Pin XLR connector- For connection between power supply and mic- Length approx. 10 m |
|
| Rode : MiCon 10 - For Rode HS1 headsets, lavalier microphones and PinMics- Suitable for MIPRO transmitters with 4-pin mini XLR connector |
|
| Rode : NT5 Matched Pair (986 comments)
- True condenser microphone with gold sputtered 1/2 capsule- Cardiod characteristic- Frequency range: 20 - 20.000 Hz- Output impedance: 100 Ohm- Maximum SPL: 143 dB- Max. output level: +13.9 dBu- Very low noise- Requires 48V phantom power- Dimensions (H x W x D): 118 x 20 x 20 mm- Weight of each mi...(+) - True condenser microphone with gold sputtered 1/2 capsule- Cardiod characteristic- Frequency range: 20 - 20.000 Hz- Output impedance: 100 Ohm- Maximum SPL: 143 dB- Max. output level: +13.9 dBu- Very low noise- Requires 48V phantom power- Dimensions (H x W x D): 118 x 20 x 20 mm- Weight of each mic: 101 g- Finish: Satin nickel- Incl. 2 x foam windscreen WS5- 2 x RM5 stand adapter and ZP1 zip pouch |
|
| Rode : NT2000 incl. SM2 (53 comments)- Infinitely variable pattern on the microphone- Very low noise- Infinitely variable filter- Infinitely variable PAD- Highest mechanical and acoustic quality- Incl. elastic mount SM2 in a case- Includes 10 years manufacturer warranty |
|
| Rode : Procaster FetAmp Bundle
Rode Procaster Dynamic Large-Diaphragm Broadcast-Quality Microphone-
For radio and dubbing studios as well as for professional podcasting-
Internal pop filter and insensitivity to HF- and other electromagnetic interference-
Neodymium large diaphragm capsule-
Polar pattern: Cardioid-
Frequency r...(+) Rode Procaster Dynamic Large-Diaphragm Broadcast-Quality Microphone-
For radio and dubbing studios as well as for professional podcasting-
Internal pop filter and insensitivity to HF- and other electromagnetic interference-
Neodymium large diaphragm capsule-
Polar pattern: Cardioid-
Frequency range: 75 - 18.000 Hz-
Output impedance: 32 Ohm-
Sensitivity -56.0 dB re 1 V/Pascal (1.60 mV @ 94 dB SPL) +/- 2 dB @ 1 kHz-
Length: 214 mm-
Diameter: 53 mm-
Weight: 695 g Thomann FetAmp Microphone Preamplifier-
Extremely low-noise Class A JFet amplifier-
For dynamic and ribbon microphones-
2 Matched JFet transistor pairs-
Input: Balanced 3-pin XLR female-
Output: Balanced 3-pol. XLR male-
Input impedance: 20 kOhm-
Gain: 28 dB (@ 3 kOhm source impedance)-
Frequency response: 10 - 50,000 Hz (+/- 1 dB)-
Requires phantom power: 24 - 48 V.-
Dimensions (L x W): 77 x 22 mm-
Weight: 35 g-
Developed and produced in Germany |
|
| Rode : WSVM (11 comments)- For Videomic, NTG-1, NTG-2 (replacement) |
|
| Rode : Podcaster Table Bundle
Rode Podcaster USB Voice Microphone-
With a dynamic large-diaphragm capsule-
A/D-D/A Conversion is done in the microphone-
Adjustable headphone amplifier with 3.5 mm jack socket integrated-
Directional characteristics: Cardioid-
Maximum sound pressure: 115dB-
Frequency range: 40 Hz to 14 kHz- ...(+) Rode Podcaster USB Voice Microphone-
With a dynamic large-diaphragm capsule-
A/D-D/A Conversion is done in the microphone-
Adjustable headphone amplifier with 3.5 mm jack socket integrated-
Directional characteristics: Cardioid-
Maximum sound pressure: 115dB-
Frequency range: 40 Hz to 14 kHz-
Including: Mount for microphone stand, USB cable 3 m-
Optional accessories: Spider connector and swivel arm for table mounting (not included) Roadworx Microphone Arm Table microphone arm with cable guide-
Cables up to 8 mm in diameter can be attached to the underside of the arms with a clip system-
Aluminium construction-
Locking centre joint-
3/8" Rhreaded connection with 5/8" adapter-
Table clamp up to 56 mm or table feed-through up to 45 mm (20 mm hole)-
Length upper arm: 43 cm-
Length lower arm: 43 cm-
Colour: Black |
|
| Rode : Tripod 2 (14 comments)
- With ball head for flexible positioning- 1/4" Threaded screw for cameras- Incl. 3/8" adapter for microphones- Two 1/4" threads for accessories on each leg- Can also be used as a handle- Maximum load: 2 kg- Material: Injection Molded Polymer- Dimensions (W x D x H): 205 x 205 x 151 mm- Weight: 180 ...(+) - With ball head for flexible positioning- 1/4" Threaded screw for cameras- Incl. 3/8" adapter for microphones- Two 1/4" threads for accessories on each leg- Can also be used as a handle- Maximum load: 2 kg- Material: Injection Molded Polymer- Dimensions (W x D x H): 205 x 205 x 151 mm- Weight: 180 g |
|
| Rode : NT2-A Studio Solution Set (757 comments)
- Rode NT2-A microphone- Deluxe SM6 shock mount with integrated pop filter- 6 m XLR cable- Dust cover- Suitable case available under Articlr Nr 486805 (not included)- Professional 1" large diaphragm microphone- Switchable directional characteristic (omnidirectional, figure-8, cardioid)- 3-Position h...(+) - Rode NT2-A microphone- Deluxe SM6 shock mount with integrated pop filter- 6 m XLR cable- Dust cover- Suitable case available under Articlr Nr 486805 (not included)- Professional 1" large diaphragm microphone- Switchable directional characteristic (omnidirectional, figure-8, cardioid)- 3-Position high-pass (flat, 40 Hz, 80 Hz); 3-Stage pad switch (flat, -5 dB, -10 dB)- Frequency range: 20 Hz - 20,000 kHz- Max. SPL (sound pressure level): 147 dB- Requires 48 V phantom power- Dimensions (H x W x D): 209 x 55 x 55 mm- Weight: 860 g |
|
| Rode : COLORS (3 comments)- Rode COLORS; identification tags for the NT-USB Mini; multi-colored (pink, green, blue, orange); 4 caps for the NT-USB Mini; 4 clips for USB-A plugs; 2x 4 clips for USB-C plugs; designed to be used with Rode Podcast Software Connect |
|