| the t.bone : Speech 100 C (5 comments)
- Condenser microphone- LCD display- Buttons: Agree, Drop, Disagree, Priority, +/-- Built-in loudspeaker with volume control- Headphone jack- Priority control specially for the presidential microphone unit- 2x LAN (In/Link)- Microphone gooseneck length: Approx. 40 cm- Dimensions (W x H x D): 169 x 4...(+) - Condenser microphone- LCD display- Buttons: Agree, Drop, Disagree, Priority, +/-- Built-in loudspeaker with volume control- Headphone jack- Priority control specially for the presidential microphone unit- 2x LAN (In/Link)- Microphone gooseneck length: Approx. 40 cm- Dimensions (W x H x D): 169 x 46 x 175 mm- Weight: 0.7 kg- Includes a 2 m network cable |
|
| Sennheiser : MAT 153-S - Suitable for Sennheiser MEG 14-40-L-II B or microphones with 5-pin XLR connector- 5-Pin XLR female connector- Talk button- Can be set as On/Off or PTT key- Rear 3-pin XLR output- Power consumption: 3.7 mA- Weight: 1.206 kg- Colour: Black |
|
| Apart : MICPAT-2 (2 comments)- Robust dynamic desktop microphone for two zones- Talk button with LED display per zone- No power supply required (provided via the central system)- Fits perfectly with the Apart Concept1/1T- Includes 5 m cable with open end |
|
| Shure : Centraverse CVG12 B/C (9 comments)- Polar pattern: Cardioid- Frequency range: 17 - 16,000 Hz- Impedance: 180 Ohm- Sensitivity: -33 dBV/Pa- Max. SPL: 120 dB- XLR connector- Length: 305mm- Weight: 0.42 kg- Colour: Black- Incl. Windshield (Article 95A16670 on the Shure website) and mounting flange (Article RPM640 on the Shure website) |
|
| Roland : CGM-30 Gooseneck Microphone (1 comments)
- Condenser microphone with an XLR output and an adjustable gooseneck (length: 30 cm)- High sensitivity for excellent audio performance- Narrow polar pattern for excellent off-axis attenuation- Removable foam shield to reduce pop and wind noise- Possible operation via phantom power (9V-52V DC)- Conn...(+) - Condenser microphone with an XLR output and an adjustable gooseneck (length: 30 cm)- High sensitivity for excellent audio performance- Narrow polar pattern for excellent off-axis attenuation- Removable foam shield to reduce pop and wind noise- Possible operation via phantom power (9V-52V DC)- Connector: XLR- Frequency range: 80 - 18,000 Hz- Output impedance: 220 Ohm- Polar pattern: Supercardioid- Sensitivity: -38 +/-3 dB (0 dB = 1 V / Pa 1 kHz)- Max. input sound pressure level (1% THD): >125 dB SPL- Power requirements: 48 V (phantom power DC 9-52 V), 11 mA- Dimensions (Ø head x L x Ø handle): 13 x 303 x 21 mm- Weight: 140 g |
|
| Shure : MX412D/C (7 comments)
- Polar pattern: Cardioid- With a very slim gooseneck (30.5 cm long)- Programmable switch and LED- Integrated preamplifier- Mini capsule changeable (modular)- Including windscreen and table stand- Transmission range: 50 Hz - 17 kHz- Output impedance: 180 O- No-load sensitivity: cardioid: -35.0 dBV /...(+) - Polar pattern: Cardioid- With a very slim gooseneck (30.5 cm long)- Programmable switch and LED- Integrated preamplifier- Mini capsule changeable (modular)- Including windscreen and table stand- Transmission range: 50 Hz - 17 kHz- Output impedance: 180 O- No-load sensitivity: cardioid: -35.0 dBV / Pa (17.8 mV)- Maximum sound pressure level (1 kHz at 1% total harmonic distortion, 1 kO load): cardioid: 124.2 dB SPL- Self-noise (equivalent sound pressure level): cardioid: 28.0 dB- Common mode rejection: at least 45.0 dB- Power supply: 11 to 52 V- Current consumption: 2 mA- Temperature range: -18º to 57º C- Relative humidity: 0 to 95% |
|
| Behringer : Hm50-BK
- Ideal for choral recordings- With integrated spring clip- Magnetically shielded- Pickup pattern: Cardioid- Frequency range: 50Hz - 18kHz- Sensitivity: (-29dB) ±3dB- 0dB=1V/Pa @ 1kHz- Impedance: 200O ±30%- Connector: Mini XLR (3-pin)- Cable Length: 10m- Colour: Black- Includes phantom voltage con...(+) - Ideal for choral recordings- With integrated spring clip- Magnetically shielded- Pickup pattern: Cardioid- Frequency range: 50Hz - 18kHz- Sensitivity: (-29dB) ±3dB- 0dB=1V/Pa @ 1kHz- Impedance: 200O ±30%- Connector: Mini XLR (3-pin)- Cable Length: 10m- Colour: Black- Includes phantom voltage converter and foam windscreen |
|
| RCS : VLM 100 A - For mixing amplifier VLA 120/240- With pre-chime and priority-switch through RJ45-jack. |
|
| Audio Technica : U857Q (5 comments)- With XLR connector- Polar pattern: Cardioid- Frequency range: 30-20,000 Hz- Sound pressure: 139 dB SPL max.- Switchable low cut 80 Hz, 18dB/octave- Gooseneck length: 36.5 cm- UniGuard technology for shielding against RF interference (such as mobile phones)- Incl. Wind shield and shock mount |
|
| Sirus : Quad R + 4C 823 Bundle Bundle offer comprising:- 4 piece(s) Sirus Quad C 823- Sirus Quad R 823 |
|
| Neumann : KM A (1 comments)- Connector: 3-Pin XLR female- 48 V phantom power- Colour: Nickel |
|
| Sennheiser : MZH 3015 L - Length: 150 mm- XLR 5-pin connector for ME34/35/36- Colour: Matte black- With luminous ring |
|
| Sennheiser : MEG 14-40-L-II B Stand Bundle
Sennheiser MEG 14-40-L-II B Gooseneck Microphone-
Suitable for Sennheiser MAT 153-S-
Condenser-
Polar pattern: Cardioid-
Connector: 5-pin XLR-M-
Requires 12-48 V phantom powe-
1 Bending point-
Light ring-
Length: 45 cm-
Colour: Black Sennheiser MAT 153-S Table Stand for Microphones-
Suitab...(+) Sennheiser MEG 14-40-L-II B Gooseneck Microphone-
Suitable for Sennheiser MAT 153-S-
Condenser-
Polar pattern: Cardioid-
Connector: 5-pin XLR-M-
Requires 12-48 V phantom powe-
1 Bending point-
Light ring-
Length: 45 cm-
Colour: Black Sennheiser MAT 153-S Table Stand for Microphones-
Suitable for Sennheiser MEG 14-40-L-II B or microphones with 5-pin XLR connector-
5-Pin XLR female connector-
Talk button-
Can be set as On/Off or PTT key-
Rear 3-pin XLR output-
Power consumption: 3.7 mA-
Weight: 1.206 kg-
Colour: Black |
|
| AKG : CHM 99 B (12 comments)- Cardiod- 70 - 18,000 Hz- 125 dB (k = 1%)- 10 M cable- 125° pickup angle- 3-Pol. XLR connector- Especially for choir pick up- Integrated spring clamp for optimum alignment- Dimensions 13.5 x 55 mm- Weight: 480 g- Colour: Black- Includes foam windshield |
|
| LD Systems : U505 CS 4 (2 comments)
- 4 channels- Frequency range: 554 - 586 MHz- Audio output: 4x XLR balanced- Audio output "Mix": XLR balanced- Antenna connector: BNC- 106 channels in 6 groups- OLED display- Operating voltage: 12 V DC (1000 mA)- Dimensions of conference system (W x H x D): 484 x 44 x 243 mm- Weight of conference sy...(+) - 4 channels- Frequency range: 554 - 586 MHz- Audio output: 4x XLR balanced- Audio output "Mix": XLR balanced- Antenna connector: BNC- 106 channels in 6 groups- OLED display- Operating voltage: 12 V DC (1000 mA)- Dimensions of conference system (W x H x D): 484 x 44 x 243 mm- Weight of conference system: 6 kg- Dimensions of microphone base (W x H x D): 115 x 54 x 135 mm- Weight of microphone base: 0.73 kg |
|
| the t.bone : Speech 100 B (1 comments)
- For the microphone units 100 C and 100 D of the digital conference system Speech 100- One 100 B supplies up to 32 additional microphone units (1x 100 M +1x 100 B = 2x16 + 2x16 =64)- With a second 100 B up to 72 microphone units (max.) are possible (1x 100 M +1x 100 B +1x 100 B = 2x12 + 2x12 +2x12 ...(+) - For the microphone units 100 C and 100 D of the digital conference system Speech 100- One 100 B supplies up to 32 additional microphone units (1x 100 M +1x 100 B = 2x16 + 2x16 =64)- With a second 100 B up to 72 microphone units (max.) are possible (1x 100 M +1x 100 B +1x 100 B = 2x12 + 2x12 +2x12 =72)- Power consumption 72 W- Dimensions: 305 x 197 x 45 mm- Weight: 2.45 kg |
|
| Behringer : Hm50
- Ideal for choral recordings- With integrated spring clip- Magnetically shielded- Pickup pattern: Cardioid- Frequency range: 50Hz - 18kHz- Sensitivity: (-29dB) ±3dB- 0dB=1V/Pa @ 1kHz- Impedance: 200O ±30%- Connector: Mini XLR (3-pin)- Cable Length: 10m- Colour: White- Includes phantom voltage con...(+) - Ideal for choral recordings- With integrated spring clip- Magnetically shielded- Pickup pattern: Cardioid- Frequency range: 50Hz - 18kHz- Sensitivity: (-29dB) ±3dB- 0dB=1V/Pa @ 1kHz- Impedance: 200O ±30%- Connector: Mini XLR (3-pin)- Cable Length: 10m- Colour: White- Includes phantom voltage converter and foam windscreen |
|
| the t.bone : GM 5212 (169 comments)- Directional characteristic: Supercardioid- Length without XLR plug: 37 cm- With straight XLR plug- Weight: 160 g- Colour: Black- Includes windscreen |
|
| the t.bone : HMC 1 (12 comments)- Cardioid characteristic- Frequency range: 70 - 16,000 Hz- Impedance: 100 Ohm- 41 dB re 1V@1Pa- XLR connector- Requires 48 V phantom power- Dimensions (Ø x L): 12 x 56.6 mm- Weight: 15 g- Colour: Black- Includes suspension bracket |
|
| Shure : MX418 D/C (14 comments)
- Characteristics: Cardioid- With very slender gooseneck (45cm long)- Integrated amplifier- Changeable Mini Capsule (modular)- Programmable switch with status LED- Incl. accessories: Windscreen- Frequency range: 50 Hz - 17 kHz- Output impedance: 180 Ohm- Open circuit sensitivity: Cardioid: -35.0 dBV...(+) - Characteristics: Cardioid- With very slender gooseneck (45cm long)- Integrated amplifier- Changeable Mini Capsule (modular)- Programmable switch with status LED- Incl. accessories: Windscreen- Frequency range: 50 Hz - 17 kHz- Output impedance: 180 Ohm- Open circuit sensitivity: Cardioid: -35.0 dBV / Pa (17.8 mV)- Maximum SPL (1 kHz at 1% THD, 1 kOhm load): Cardioid: 124.2 dB SPL- Self-noise (equivalent sound pressure level): Cardioid: 28.0 dB- CMRR: at least 45.0 dB- Power supply: 11 to 52 V- Power consumption: 2 mA- Temperature range: -18 To + 57 ° C- Relative humidity: 0 to 95% |
|