3 Classic US amp voicings: '60 Tweed, '62 Blonde and '65 Black- Comparable power to a 25-watt tube amp with the included PS-24 power supply or 1-watt low-power mode with a conventional 9V power supply- 2 Cab sims and 1 FRFR mode on XLR and headphone output- Limiter- Reverb- Effect Loop- 1 Channel- Power: 25 W- Controls: Gain, Limiter, Bass, Mid, Treble, Reverb, Master- Switch: Power: On/Stby/Off- Cab Sim: Brt/Norm/FRFR- Voice: 60 Tweed / 62 Blonde / 65 Black- Speaker outputs: 4-16 Ohm (6.3 mm jack)- Input: 6.3 mm jack- FX send / return: 2 x 6.3 mm jack- Phones: 3.5 mm stereo jack- Line output: XLR- Dimensions (W x D x H): 165 x 108 x 38.1 mm- Weight: 0.610 kg- Includes power supply 24 V DC / 3.0 A

2 Channels- Power: 100 W- Clean channel: Volume, Bass and Treble- Dirty channel: Volume, Bass, Middle, Treble and Gain- Master: Volume and Reverb- Effects: Reverb- Serial FX loop- Speaker outputs: 1 x 16 Ohm and 1 x 16/8 Ohm- Input: 6.3 mm jack- FX send / return: 2x 6.3 mm jack- Connection for footswitch: 6.3 mm jack- CabSim: XLR- Dimensions (W x D x H): 55 x 25 x 23 mm- Weight: 13.8 kg- Colour: Orange

2 Channels- Power: 100 W- Clean channel: Volume, Bass and Treble- Dirty channel: Volume, Bass, Middle, Treble and Gain- Master: Volume and Reverb- Effects: Reverb- Serial FX loop- Speaker outputs: 1 x 16 Ohm and 1 x 16/8 Ohm- Input: 6.3 mm jack- FX send / return: 2x 6.3 mm jack- Connection for footswitch: 6.3 mm jack- CabSim: XLR- Dimensions (W x D x H): 55 x 25 x 23 cm- Weight: 13.8 kg- Colour: Black

Guitar Amp Head Power: 100 W Class A/B transistor power amp Single-ended Jfet preamplifier Channel A for clean to dirty (footswitchable) Channel B for crunch to high gain ( footswitchable) Tubby switch on channel A Tight switch on channel B Buffered FX Loop Rack installation possible Dimensions (W x H x D): 300 x 80 x 195 mm Weight: 3.59 kg Includes travel bag

3 Classic UK amp voicings: JMP, AC Normal and AC Top Boost- Comparable power to a 25 watt tube amp with the included PS-24 power supply or 1 watt low power mode with a conventional 9 V power supply- 2 Cab Sims and 1 FRFR mode on XLR and headphone output- Limiter- Reverb- Effect Loop- 1 Channel- Power: 25 W- Controls: Gain, Limiter, Bass, Mid, Treble, Reverb, Master- Switch: Power: On/Stby/Off- Cab Sim: Brt/Norm/FRFR- Voice: 1979 JMP / AC Norm / AC Top- Speaker outputs: 4-16 Ohm (6.3 mm jack)- Input: 6.3 mm jack- FX Send / Return: 2 x 6.3 mm jack- Phones: 3.5 mm stereo jack- Line output: XLR- Dimensions (W x D x H): 165 x 108 x 38.1 mm- Weight: 0.610 kg- Includes power supply 24 V DC / 3.0 A

Incl. 600 W class D power amplifier (600 W at 8 ohm, 300 W at 16 ohm)- Dimensions (W x H x D): 483 x 139 x 220 mm, 19"/ 3 U- Weight: 5.5 kg- Format: 19"/ 3 U (since the rubber feet should not be removed for ventilation reasons, a min. 4 U rack is required)- Colour: Black- Incl. remote control base board- Mic Input- Line In- Alternative Input- Direct Out- Monitor Out- Master Out (jack & XLR)- S/PDIF digital input and output- MIDI In / Out / Thru- 2x Foot switches (jack)- Network- USB

Ideal for metal and high gain sounds- Spirit Tone Generator technology- Completely analogue sound generation- Nano head with up to 50 watts into 4 ohms- Sagging control for power amp saturation independent of volume level- Headphone output with RedBox emulation of the TubeMeister18- Unfiltered line-out as ideal basis for the use of software cab sims- Transport-friendly miniature format- Channels: 1- Power: 50 watts- Controls: Master, Sagging, Tone, Gain- Loudspeaker outputs: min. 4 Ohm (2 x 6.3 mm jack)- Instrument input: 6.3 mm jack)- Aux input: 3.5 mm stereo jack- Headphone connection: 6.3 mm stereo jack- Dimensions (W x D x H): 190 x 90 x 90 mm- Weight: approx. 1.1 kg incl. power supply unit (725 g without power supply unit)

Transistor Amp Head for Electric Guitar 2 Channels: Clean and Overdrive Power: 100 Watt Mosfet-Preamp Controls: Clean Volume, Overdrive Gain, Overdrive Volume, Bass, Middle, Treble, ISF, Reverb Level Switches: Clean Bright, OD, Reverb Select, Power Reduction 5W / 100W Connections: Input, line output / phones, footswitch, line input, effects loop Speaker outputs: 8 Ohm, 16 Ohm Dimensions (H x W x D): 209 x 465 x 219 mm Weight: 6.47 kg Colour: Beige

Picks up where the Overdrive 200 left off and features three new tones with their own overdrive channel, reverb, limiter and a line out with speaker simulation- The three tones range from the improved Quilter classic "Full Q" on Voice 1, the "bell-like" overtone-rich Voice 2 to the concise and full attack of Voice 3- The Overdrive 202 provides a suitable timbre for every musical situation- Can be combined with a UFC-3 footswitch and BlockDock 12 HD box for the ultimate travel rig (neither included)- International power supply accepts AC voltages from 100-250V- 3 Channels- Power: 200 watts- Overdrive Channel controls: Gain, Limit, Output- Controls Clean Channel: Gain, Bass, Mid, Treb - Reverb, Master- Switch: Voice 1/2/3, Sig Out Pre/Post- Speaker outputs: 4, 8 Ohm (2x 6.3 mm jack)- FX loop: Series- Input: 6.3 mm jack- FX Send & Return: 2x 6.3 mm jack- Sig Out: 6.3 mm stereo jack- Footswitch connection: RJ45- DI Out: 6.3 mm Stereo jack- Dimensions (W x D x H): 218 x 185 x 74 mm- Weight: 1.8 kg- Block Case 2.0: Art.491262- UFC-3 foot switch: Art.488400- BlockDock 12HD: Art.442063