Effect Pedal Stereo Looper and Drum Machine Looper and drum machine can be used independently and simultaneously 100 Memory locations for a total of 300 minutes of recording time Round 1.3-inch touch screen for status display and convenient function control 220 Different drum grooves from 11 different styles BPM adjustment via tap tempo input ‘Time Stretch’ function for tempo adjustment without changing the pitch Automatic recording start function avoids synchronisation problems and enables spontaneous recordings Integrated adjustment function for perfect synchronisation of the drum computer with the looper recordings Flexible options for input and output modes Automatic tempo adjustment for the drum computer (DrumMatch) Variable fade out function Special PC software for importing and exporting audio files and updating firmware 44.1 kHz sampling rate 2x Multifunctional footswitches Controls for looper volume and menu encoder Auto Rec, Tap and Drum push buttons 2 x 6.3 mm mono jack input / output 3.5 mm jack stereo headphone output USB Type-C port Power supply via included 9V DC power supply unit, 2.1 x 5.5 mm barrel connector, polarity (-) inside Current consumption: 300 mA Dimensions (L x W x H) 125 x 74 x 49 mm Weight: 200 g Includes USB Type-C to USB Type-A cable Note: Battery operation is not supported

Mooer Ocean Machine II - Devin Townsend Signature Dual Delay/Reverb/Looper effects pedal, two independent delay modules with 9 different delay types available for each module, total of 15 different delay types, 0-2,000 ms delay time, ping pong effect, 9 different reverb types and shimmer effect, programmable parallel/serial effect chain, with selectable order of effects, freeze function, tap tempo functionality, looper with up to 120 seconds of recording time, adjustable Global EQ settings plus adjustable input and output levels, true bypass or DSP (buffered) bypass, 2 modes of operation: Play Mode for quick parameter editing and Patch Mode for quick preset access, 8 banks with 3 presets each, upgraded MIDI control with clock sync, allowing the pedal to sync with other MIDI devices, Reverb section controls for Pre-Dly, Decay, Tone and R. Mix, Reverb rotary switch for selecting Reverb mode (Room / Hall / Plate / Dist-Verb / FL-Verb / Filter / Reverse / Spring / Mod), Delay A section controls for Feedback A, Time A, Sweep A and DlyMix A, Delay A rotary switch for selecting Delay A mode (Digital / Analog / Tape / Echo / Liquid / Rainbow / Crystal / Low-Bit / Fuzzy), Delay B section controls for Feedback B, Time B, Sweep B and DlyMix B, Delay B rotary switch for selecting Delay B mode (Digital / Analog / Tape / Real / Dyna / Galaxy / Mod / Try-Mod / Mod-Inv), Reverb footswitch, Delay A Footswitch, Delay B Footswitch, supports external control with MOOER F4 wireless footswitch controller, Control buttons for Home, Setting, Store and Looper, Menu rotary button for navigating the preset menu, status LEDs, metal housing, 6.3 mm mono input L/R jacks, 6.3 mm mono output L/R jacks, MIDI in jack, MIDI thru jack, 6.3 mm TRS expression input jack, USB Type-C port, power supply via included 9V DC adapter 2.1 mm x 5.5 mm barrel plug, polarity (-) center, battery operation not supported, current draw 500 mA, dimensions (L x W x H) 215 mm x 127 mm x 56 mm / 8.46" x 5" x 2.2", weight 1100 g / 2.43 lbs

Multi-Effect Unit and Audio Interface for Electric Guitar Based on Mooer's unique MNRS sampling technology for high-quality digital amplifier models and effects Free Prime app serves as editor software (available for Android and iOS devices) 1.3" touchscreen enables quick switching of presets and access to the tuner directly on the device 52 amplifier models created with MNRS technology 10 GNR slots for saving simulation files downloaded from the cloud 25 Cab Sim models 10 GIR slots for storing simulation files downloaded from the cloud or third-party IR files 57 classical and experimental effect models Up to 80 presets in 20 banks 4 Metronome styles 56 Drum machine patterns that can be synchronised with the looper 80-Second looper (storage for 10 loops with 8 minutes each) Supports the loading of IR files from third-party providers Supports Tone Cloud sound sharing Supports stereo output for stereo effects Tuner function Bluetooth audio playback in stereo for practice and jamming Direct USB OTG recording via smartphone or tablet Configurable, stylish RGB status LED MIDI connection for preset switching and looper/drum machine control Mooer Studio PC management software for backup and updates Up to 6 hours of battery life per charge Integrated, rechargeable lithium-ion battery: 3000 mAh Bluetooth 5.0 6.3 mm mono jack input 2x 6.3 mm mono jack output 3.5 mm TRRS headphone output (supports the use of headphones with integrated microphone) USB type-C connection Dimensions (L x W x H): 125 x 74 x 49 mm Weight: 228 g Colour: Grey Includes USB Type-A to USB Type-C cable and 3.5 mm to 5-PIN MIDI adapter cable

For electric guitars and electric basses- Also suitable for 7-string electric guitars and 5-string bass- 108 LEDs- True bypass- Metal housing- Power supply via power adapter (not included, matching power adapter Article Nr 409939), battery operation not possible- Dimensions (L x W x H): 93.5 x 42 x 52 mm

Rechargeable Multi-Effects Pedal for Electric Guitar MNRS 2.0 sampling technology for emulating distortion pedals, preamps, amplifiers and cabinets Integrated, rechargeable 7.4 V / 4750 mAh Li-Ion battery for cordless operation Up to 6 hours of battery life per charge Effect signal chain fully adjustable and changeable High-quality 5-inch touchscreen with intuitive user interface Over 350 original factory effects models 120 Sampling slots with upload/download support via the MOOER Cloud app Groove station with a drum machine and a looper with sync function AI-controlled automatic equaliser Professional low-latency ASIO USB audio interface (USB Type-C) with up to 192 kHz sample rate Special computer editor software and mobile app for preset management and sample file downloads MIDI compatibility Switchable serial/parallel TRS stereo FX LOOP for connection to your favourite external pedals Supports third-party IR files with up to 2048 sampling points Adjustable ambient lighting 48V phantom power Multifunctional A, B, C, D footswitches Controls for Master, Select, Mic Gain, Home, Save, Profiling Push buttons Phantom power ON / OFF switch Wireless Bluetooth 5.0 connection for AUX input Support for wireless footswitch control USB MIDI function Aluminium housing Power consumption: 3000 mA Power supply via enclosed 9 V DC power supply unit 2.1 x 5.5 mm hollow plug, polarity (-) inside Dimensions (W x D x H): 240 x 160.5 x 62 mm Weight: 1.43 kg Includes USB cable Connections: Input: 6.3 mm mono jack and XLR/jack (6.35 mm) combo socket Send/Return: 6.3 mm TRS jack each Outputs: 2 6.3 mm mono jacks (L / R) MIDI input and output: Mini TRS USB Type-C Headphone output: 3.5 mm stereo jack

Digital reverb- 14 Selectable reverb modes- Bypass with trails (switchable) allows natural decay of the effect- Foot-switchable Infinite function for endless reverb tails- Storable preset for each effect mode- Controls for mix, decay, pre-DLY, HC (high-cut), LC (low-cut)- Save button- Infinite and bypass footswitch- Status LEDs- Input / output (true stereo): 2x 6.3 mm mono jack- Power supply via 9V DC mains adapter- Mains adapter connection: Hollow female plug 5.5 x 2.1 mm, negative polarity inside- Power consumption: 300 mA- Metal housing- Dimensions (L x W x H): 115 x 75 x 33 mm- Weight: 334 g- Incl. power supply unit

Multi-effects unit / audio interface for electric guitar and electric bass Based on Mooer's unique MNRS sampling technology for high-quality digital amplifier models and effects Free Mooer Prime app serves as editor software (available for Android and iOS devices) 128 Integrated effect models 21 bass amp and speaker simulation models 10 Selectable metronomes 40 Drum machine patterns 80 Second looper Tuner function Bluetooth audio playback for practice and jamming Direct USB OTG recording via smartphone or tablet Compact size and minimalist design LC-display Control for master volume Two multifunctional footswitches for managing the presets, the looper and the drum machine Up to 5 hours of battery life per charge Integrated, rechargeable lithium-ion battery: 2,000 mAh Bluetooth 5.0 6.3 mm mono jack input 6.3 mm Stereo jack output 3.5 mm headphone output USB Type-C connection Dimensions (L x W x H): 120 x 70.2 x 31.9 mm Weight: 190 g Includes USB type A to USB type C cable

14 save slots for the looper- 10 minutes max. Recording time for each looper track (140 min. stereo audio)- 121 different drum grooves from 11 different styles- Justify function synchronises drum machine and looper- Time Stretch function changes playback speed without changing pitch- Looper playback and drum machine can be split to two different outputs- Auto-record function starts recording automatically when input signal is detected- Supports free editor software for importing and exporting audio files- Controls for loop (level), drum (level) and speed- Genre selector- Pattern selector switch- Save button- Rec / Play / Dub footswitch- Stop / Tap footswitch- Status LEDs- Metal housing- Input and output: 2 each 6.3 mm mono jack input / output (true stereo)- 3.5 mm stereo jack input for external control- Power supply via included 9V DC power supply unit, 2.1 x 5.5 mm hollow plug, polarity (-) inside- Power consumption 300 mA- Dimensions (L x W x H): 115 x 75 x 33 mm- Weight 334 g

Digital envelope filter- 5 Different wah filter effects (lowpass, bandpass, highpass, standard and vocal)- 2 Working modes (auto and touch)- Range and speed â â / gain controls- Knob to select the wah filter mode- Toggle switch for switching between auto and touch modes- True bypass- Status LED- Bypass footswitch- Metal housing- 6.3 mm mono jack input / output- Power supply with 9 V DC power supply, 2.1 x 5.5 mm barrel connector, polarity (-) inside (not included)- Current consumption 120 mA- Dimensions (W x D x H): 42 x 93 x 52 mm- Weight: 140 g