2 Noiseless P-90 in Soapbar housing- For bridge and neck position- Output: Vintage- Authentic P-90 tone from the 50s with powerful, clear highs but without the hum- Built using parts and materials found in original vintage P-90 pickups- Connections: 1-core with braided shielding- DC resistance (bridge): 8.6 kOhm- DC resistance (neck): 8 kOhm- Magnet material: Alnico 5- Cap colour: Black- Incl. Mounting screws- Made in USA

2 Humbuckers- For the bridge and neck position- Vintage output- Authentic PAF "Patent Applied For" sound- Very clear and warm with lots of single coil articulation and an airy tone thanks to the unpotted coils- For sound purists- Authentic all American components, right down to the last detail- 1959 Spec butyrate bobbins- 1959 Spec long leg frame- Custom-made vintage spec enamel wire- Custom-made alnico 4 cast magnets- Maple spacer- Vintage spec pole screws and pole slugs- Standard string spacing- Connections: 2-wire with braided leads- DC resistance: Bridge: 8.2 kOhm; Neck: 7.4 kOhm- Magnetic material: Alnico 4- Nickel caps- Includes mounting screws and springs- Made in the USA

Pickup for Electric Guitar Hand-wound Noiseless P-90 Authentic P-90 sound from the 50s with powerful, clear highs, but without the hum Built using parts and materials found in original vintage P-90 pickups Position: Bridge Output: Vintage Connections: 1-conductor with braided shield DC resistance: 8.6 kOhm Magnet material: Alnico 5 Distance between the fixing screws: 98 mm Cover colour: Black Includes mounting screws Made in USA

No soldering required - simply attach and play- 3-Ply standard 11 hole pickguard- 2 Noiseless single coils (middle & neck) and 1 humbucker (bridge) with F-spaced string spacing- '58 Quiet coils offer a hum-free vintage strat sound without ever compromising true single coil clarity or playing feel- Special '58 humbucker in the bridge position for creamy P.A.F. tones that cut through the ix- Output: Vintage & Medium- Volume control with treble bleed- Tone control- Blender control can be added to the neck or bridge pickups at positions 1, 2, 4, and 5- The humbucker is tapped in position 2 for authentic hollow single coil sound- 3 CTS 500k Custom split-shaft potentiometers (9.5 mm thread length)- CRL 5-Way switch- Switch positions: 1 - Bridge, 2 - Bridge & Middle, 3 - Middle, 4 - Middle & Neck, 5 - Neck- Switchcraft mono input jack- Vitamin "T" oil filled .047 uf capacitor- Pre-tinned, cloth covered wire- DC resistance (bridge): 8.3 kOhm- DC resistance (middle): 5.9 kOhm- DC resistance (neck): 5.9 kOhm- Magnet material: AlNiCo 5- Cap colour: Black- Pickguard colour: Black- Made in the USA

Hand-wound Noiseless P-90 pickup- Authentic P-90 tone from the 50s with powerful, clear highs but without the hum- Built using parts and materials found in original vintage P-90 pickups- Position: neck- Output: vintage- Connections: 1-wire with braided leads- DC resistance: 8 kOhm- Magnet material: AlNiCo 5- Distance between fixing screws: 98 mm- Cap colour: Black- Incl. fixing screws- Made in USA

Set of Pickups for Electric Guitar Positions: Bridge and neck Type: Noiseless P-90 Output: Vintage Housing: Soapbar Authentic P-90 sound from the '50s with powerful, clear highs, but without hum Built using parts and materials found in original vintage P-90 pickups Connections: 1-conductor (braided shield) DC resistance (bridge): 8.6 kOhm DC resistance (neck): 8 kOhm Magnet material: Alnico 5 Cover colour: Cream Fixing screws included Made in USA

2 Humbuckers- For bridge and neck position- Output: Vintage- Authentic P.A.F. reproduction using American components- Lower output power than the standard version, making them much clearer and more distinct- Unwaxed coils- String spacing: Standard- Connections: 2-wire (braided shield)- DC resistance (bridge): 7.8 kOhm- DC resistance (neck): 7.0 kOhm- Magnet material: Alnico 4- Cover colour: Gold- Includes mounting screws and springs- Made in USA

Mojotone 59 Clone J-Master Set CR; Pickup Set for J-Master Electric Guitar; Handwound; Positions: Bridge & Neck; Construction: Single Coils; Output: Vintage; The neck pickup is clean and loud with exceptional clarity and warmth. The bridge pickup feels loose with plenty of power; Reverse wound for hum suppression when both pickups are together; Vacuum potted coils; Wiring: 2-conductor; DC Resistance (Bridge): 8,3 kOhms, (Neck): 7,9 kOhms, Cover Colour: Cream; Included: Foam rubber & springs; Made in USA

Mojotone 59 Clone Low Output Humbucker Set C; Pickup Set for Electric Guitar; Positions: Bridge & Neck; Construction: Humbucker; Output: Vintage; Authentic P.A.F. reproduction using all American made parts; lower output than the standard version, making them much more articulate and crisp; unpotted coils; String Spacing Standard; Wiring: 2-conductor with braided shield; DC Resistance (Bridge): 7,8 kOhms, (Neck): 7,0 kOhms; Magnet Material: Alnico 4, Cover Colour: Chrome; Included: Mounting Screws & Springs; Made in USA

No soldering required - simply attach and play- 3-Ply standard 11 hole pickguard- 3 Noiseless single coils (bridge, middle, & neck)- Manufactured in compliance with the current Vintage single coil attributes- Matched resonance frequency and inductance in order to reproduce the frequency response and feel of conventional single coils- Output: Vintage & High- Hot pickup on the bridge with more bass and mids for a good balance between the positions and better sustain- Volume control with treble bleed- Tone control for bridge pickup- Tone control for mid and neck pickups- 3 CTS 500k Custom split-shaft potentiometers (9.5 mm thread length)- CRL 5-Way switch- Switch positions: 1 - Bridge, 2 - Bridge & Middle, 3 - Middle, 4 - Middle & Neck, 5 - Neck- Switchcraft mono input jack- Vitamin "T" oil filled .047 uf capacitor- Pre-tinned, cloth covered wire- DC resistance (bridge): 11.6 kOhm- DC resistance (middle): 5.9 kOhm- DC resistance (neck): 5.9 kOhm- Magnet material: AlNiCo 5- Cap colour: White- Pickguard colour: White- Made in the USA