Controller Modules - Modular Synthesizers - SYNTHESIZER KEYBOARD - Musical Equipment

My account (log-in)

€

SYNTHESIZER KEYBOARD

FREE SHEET MUSIC SHEET MUSIC STORE DIGITAL SHEET MUSIC

‹ SYNTHESIZER KEYBOARD
‹ Modular Synthesizers
‹ Back to page

Modular Synthesizers

Accessories (122)

Clock-, Trigger-Modules (18)

Complete Modular Systems (17)

Controller Modules (38)

Drum Modules (28)

Effect Modules (80)

Envelope Modules (55)

Eurorack housings (68)

Expander Modules (57)

Filter Modules (88)

Interface Modules (54)

LFO Modules (21)

Logic Modules (12)

Mixer, Attenuator Modules (86)

Modular Synth Patch Cable (27)

Multiple, Divider Modules (34)

Noise Modules (17)

Oscillator Modules (70)

Phase Shifter Modules (4)

Ring Modulator, Crossfade Modules (16)

Sample and Hold Modules (6)

Sampler Modules (13)

Synthesizer Modules (26)

Trigger, CV Sequencer (40)

Various Modules (64)

VCA Modules (37)

Waveshaper, Distortion Modules (22)

By Brands› ADDAC (8)› Doepfer (8)› Behringer (3)› Endorphin.es (2)› Soundmachines (2)› Der Mann mit der Maschine (2)› Shakmat Modular (2)› Verbos Electronics (2)› Befaco (2)› Sacrament Modular (1)

5 next brands

By Shop

INSTRUMENTS

Arranger Keyboards, Samplers, and Sequencers

Digital Piano

Hardware Sequencers and Arrangers

Keyboards for children

Modular Synthesizers

Keyboard Controllers

Synthesizer

ACCESSSORIES

Benchs - Thrones - Stools

Cables : Instrument

Cases - Bags

Expandable Synthesizer Modules

Keyboard Amps

Pedals

Software : Keyboards Expansion Boards

Stands - Foots

Various Accessories

FREE SHEET MUSIC
FOR SYNTHESIZER KEYBOARD

SHEET MUSIC STORE
FOR SYNTHESIZER KEYBOARD

DIGITAL SHEET MUSIC
FOR SYNTHESIZER KEYBOARD

MUSICAL INSTRUMENTS
FOR SYNTHESIZER KEYBOARD

Search Musical Equipment

Active filters for search: Exclude the search criteria


Sections	Clean all
Categories
Sub-cat.
Brands
Price

EQUIPMENT › Pianos & Keyboards › Modular Synthesizers › Controller Modules

Sorted and Filters :

In stock

38 accessories found - results for FRANCE (Change geographical area)

< 1 21

	ADDAC : 308 Light To CV - Converts the signal of an external light sensor (LDR) into control voltage- Sensitivity and gain control for adaptation to the LDR signal- Selector switch for 3 response times- Positive and inverted CV output- Each with offset control- LDR connection via normal 3.5 mm mono patch cable- Light senso...(+) - Converts the signal of an external light sensor (LDR) into control voltage- Sensitivity and gain control for adaptation to the LDR signal- Selector switch for 3 response times- Positive and inverted CV output- Each with offset control- LDR connection via normal 3.5 mm mono patch cable- Light sensor included- Current consumption: 50 mA (+12 V) / 50 mA (-12 V)- Width: 4 HP- Depth: 45 mm 149.00€ - Sold by Thomann In Stock (24 hours) Similar Items

	ADDAC : 305 Manual Latches (2 comments) - 8 Illuminated switches for manual generation of a fixed voltage (+5 V)- 4 of the 8 channels have signal inputs and can be used as latching switches- Current consumption: 10 mA (+12 V) / 10 mA (-12 V)- Width: 8 HP- Depth: 25 mm 111.00€ - Sold by Thomann In Stock (24 hours) Similar Items

	Endorphin.es : Total Recall Silver - CV Preset Manager- 3 Channels, each with adjustable fixed voltage via rotary control- CV input per channel allows use as unipolar attenuator or bipolar inverter- CV output per channel- Voltage range: 0 V to +5 V or -5 V to +5 V- The status of all channels can be stored in 8 presets- Presets can be...(+) - CV Preset Manager- 3 Channels, each with adjustable fixed voltage via rotary control- CV input per channel allows use as unipolar attenuator or bipolar inverter- CV output per channel- Voltage range: 0 V to +5 V or -5 V to +5 V- The status of all channels can be stored in 8 presets- Presets can be switched or morphed manually, by CV signal or clock signal- Power consumption: 55 mA (+12 V) / 15 mA (-12 V)- Width: 6 U- Depth: 30 mm 196.00€ - Sold by Thomann In Stock (24 hours) Similar Items

	Soundmachines : LS1 Lightstrip - 79.00€ - Sold by Thomann In Stock (24 hours) Similar Items Soundmachines

	Der Mann mit der Maschine : Droid Master + G8 Set - Consisting of Droid Master + G8 Expander- Incl. 8-pin ribbon cable to connect the G8 Expander with the Droid Master- Programmable CV processor- 8 CV Inputs and outputs (-10V to +10V)- User-adjustable patches allow almost any type of CV editing- Generation of CV and gate signals and the configurati...(+) - Consisting of Droid Master + G8 Expander- Incl. 8-pin ribbon cable to connect the G8 Expander with the Droid Master- Programmable CV processor- 8 CV Inputs and outputs (-10V to +10V)- User-adjustable patches allow almost any type of CV editing- Generation of CV and gate signals and the configuration of personalised controllers- Possible applications: LFO, envelope generator, melody and trigger sequencer, Euclidean sequencer, random generator, sample & hold, clock divider, CV looper, CV mixer, quantiser, logic processor, slew limiter and many more- Patches are loaded via a text file on the microSD card- Clear programming possible via any text editor- Expandable with G8 Expander for 8 additional inputs and outputs for trigger/gate signals- Expandable with X7 Expander for MIDI in/out and USB-MIDI- Expandable with up to 16 controllers like B32, P2B8 or M4 to add buttons, rotary knobs or faders to Droid Master- Power consumption: 154mA (+12V) / 15mA (-12V)- Width: 8 TE- Depth: 40 mm- Expands Droid Master (article no. 542913) by 8 sockets that can be configured as outputs or inputs for trigger and gate signals- Power consumption: 41mA (+12V) / 0mA (-12V)- Width: 4 TE- Depth: 23 mm 519.00€ - Sold by Thomann In Stock (24 hours) Similar Items

	Doepfer : A-174-2 (5 comments) - With two modulation wheels- The factory setting is a spring loaded wheel on the left side with bipolar voltage output (i.e. 0V in the centre position, positive voltage in the upper range, negative voltage in the lower range; voltage range approx. -5.5 V ... 0 V ... +5.5 V)- The wheel to the right ...(+) - With two modulation wheels- The factory setting is a spring loaded wheel on the left side with bipolar voltage output (i.e. 0V in the centre position, positive voltage in the upper range, negative voltage in the lower range; voltage range approx. -5.5 V ... 0 V ... +5.5 V)- The wheel to the right side is without spring and has a positive voltage output (i.e. 0V in the lowest position and positive voltage when operated upwards; voltage range approx. 0...+8 V)- For the spring loaded wheel a voltage "plateau" around 0 V is the preset, so the output voltage is always 0 V in a small range near to the centre position- Width: 14 HP- Depth: 40 mm- Power requirement: +10 mA (+12 V) / -10 mA (-12 V) 98.00€ - Sold by Thomann In Stock (24 hours) Similar Items

	Sacrament Modular : The Cursible - Morphing Effects Matrix- Mixes, distributes and morphs an audio/CV signal between 6 send/return paths- Manual control via central encoder, CV input (with attenuator), direct selection via push-button or sequentially via clock input- 6 Different morph settings with different characteristics- Attack...(+) - Morphing Effects Matrix- Mixes, distributes and morphs an audio/CV signal between 6 send/return paths- Manual control via central encoder, CV input (with attenuator), direct selection via push-button or sequentially via clock input- 6 Different morph settings with different characteristics- Attack and release times selectable- Suitable for audio and CV signals- Current consumption: 52 mA (+12 V) / 26 mA (-12 V)- Width: 14 HP- Depth: 25 mm 265.00€ - Sold by Thomann In Stock (24 hours) Similar Items

	Behringer : CP3A-O OSC Controller (3 comments) - 4 CV inputs- CV input 4 with attenuator- 4 Switches to switch and sum CV signals- 3 CV outputs with identical signal- Width: 8 HP- Current consumption: 5 mA (+12 V) / 5 mA (-12 V) 44.00€ - Sold by Thomann In Stock (24 hours) Similar Items

	Bela.io : Gliss - Bela.io Gliss; Eurorack module; Capacitive Touch Controller; creating control voltages for touch position and pressure; Keyboard-Mode with 5 buttons; Scale-Meter Mode for visualising signals with attenuator and adjustable offset; RGB backlight; gesture recording (1 minute recording time); playback...(+) - Bela.io Gliss; Eurorack module; Capacitive Touch Controller; creating control voltages for touch position and pressure; Keyboard-Mode with 5 buttons; Scale-Meter Mode for visualising signals with attenuator and adjustable offset; RGB backlight; gesture recording (1 minute recording time); playback of recorded gestures as loop or one-shot via button or trigger input; illuminated button for programming and as manual trigger; signal input (range: -5V to +10V); two configurable outputs (range: -5V to +10V); power consumption: 150mA (+12V) / 20mA (-12V); width: 4 HP; depth: 26mm 153.00€ - Sold by Thomann In Stock (24 hours) Similar Items

	Robaux : 3PT (8 comments) - 3-Channel multimode controller- Three trim controls are available per channel to determine minimum, offset and maximum- CV controller with LED ring display for controlling all three channels simultaneously (with CV input)- 7 Selectable operating modes allow use as macro controller, 3-channel LFO, ...(+) - 3-Channel multimode controller- Three trim controls are available per channel to determine minimum, offset and maximum- CV controller with LED ring display for controlling all three channels simultaneously (with CV input)- 7 Selectable operating modes allow use as macro controller, 3-channel LFO, chord generator, quantiser, random generator, sequencer and Euclidean pattern generator- Current consumption: 20mA (+12V) / 0mA (-12V)- Width: 10 HP- Depth: 25 mm 165.00€ - Sold by Thomann In Stock (24 hours) Similar Items

	Shakmat Modular : Tessitura Tailor (2 comments) - Transposes incoming voltages in the range of -2 to +2 octaves- Can be used as octave selector even without input signal- Current consumption: 1 mA (+12 V) / 1 mA (-12 V)- Width: 14 HP- Depth: 22 mm- Intellijel 1U format 77.00€ - Sold by Thomann In Stock (24 hours) Similar Items

	Behringer : Radar (1 comments) - Behringer Radar; Eurorack Module; Built-in Contact microphone; reacts to touch, rubbing, vibration, etc.; +50dB signal amplifier; Hi-Z input for external contact microphones; Audio output; Touch sensitivity selectable in 3 steps; Envelope follower with 3 attack and release times; Outputs for envel...(+) - Behringer Radar; Eurorack Module; Built-in Contact microphone; reacts to touch, rubbing, vibration, etc.; +50dB signal amplifier; Hi-Z input for external contact microphones; Audio output; Touch sensitivity selectable in 3 steps; Envelope follower with 3 attack and release times; Outputs for envelope follower and gate signal; 3 indicator LEDs to monitor input, envelope follower level and gate activity; power consumption: 10mA (+12V) / 5mA (-12V); Width: 6 TE 85.00€ - Sold by Thomann In Stock (24 hours) Similar Items

	Der Mann mit der Maschine : Droid Master (4 comments) - Programmable CV processor- 8 CV inputs and outputs (-10V to +10V)- User-creatable patches allow almost any kind of CV editing, generation of CV and gate signals and configuration of personalised controllers- Possible applications: LFO, envelope generator, melody and trigger sequencer, Euclidean se...(+) - Programmable CV processor- 8 CV inputs and outputs (-10V to +10V)- User-creatable patches allow almost any kind of CV editing, generation of CV and gate signals and configuration of personalised controllers- Possible applications: LFO, envelope generator, melody and trigger sequencer, Euclidean sequencer, random generator, sample & hold, clock divider, CV looper, CV mixer, quantiser, logic processor, slew limiter and many more- Patches are loaded via a text file on the microSD card- Clear programming possible via any text editor- Expandable with G8 Expander for 8 additional inputs and outputs for trigger/gate signals- Expandable with X7 Expander for MIDI in/out and USB-MIDI- Expandable with up to 16 controllers like B32, P2B8 or M4 to add buttons, knobs or faders to Droid Master- Power consumption: 154mA (+12V) / 15mA (-12V)- Width: 8 U- Depth: 40 mm 393.00€ - Sold by Thomann In Stock (24 hours) Similar Items

	ADDAC : 307 Heart Sensing (1 comments) - Generates a gate signal and an AD envelope from the user's heartbeat- Controls for attack, decay, amplitude and offset- Positive and inverted envelope output- Trigger output, sensor input- Current requirement: 60 mA (+12 V) / 10 mA (-12 V)- Width: 4 HP- Depth: 35 mm- Includes clip sensor for attac...(+) - Generates a gate signal and an AD envelope from the user's heartbeat- Controls for attack, decay, amplitude and offset- Positive and inverted envelope output- Trigger output, sensor input- Current requirement: 60 mA (+12 V) / 10 mA (-12 V)- Width: 4 HP- Depth: 35 mm- Includes clip sensor for attachment to finger or earlobe 179.00€ - Sold by Thomann In Stock (24 hours) Similar Items

	Doepfer : A-178 Theremin Vintage Edition (4 comments) - Generates variable control voltage by bringing the hand closer to the antenna- Distance range: approx. 30 cm- Max. output voltage: +10V- Eurorack format- Current: +60 mA (+12 V) / -20 mA (-12 V)- Width: 8 HP / 40.3 mm- Depth: 40 mm, measured from the rear side of the front panel- Black front panel 107.00€ - Sold by Thomann In Stock (24 hours) Similar Items

	Verbos Electronics : Touchplate Keyboard - 32 Chromatic touchplates generate gate- 10 ms trigger- Grade CV (1 V / Oct)- 2 Bender touch plates with separate output- 8 Additional touch plates with adjustable output voltage- Pressure CV and gate- Optionally with 9-15 VDC power supply for operation- Width: 84 HP / HP- Depth: 27 mm- Power requi...(+) - 32 Chromatic touchplates generate gate- 10 ms trigger- Grade CV (1 V / Oct)- 2 Bender touch plates with separate output- 8 Additional touch plates with adjustable output voltage- Pressure CV and gate- Optionally with 9-15 VDC power supply for operation- Width: 84 HP / HP- Depth: 27 mm- Power requirement: +120 mA (+12 V) / -0 mA (-12 V) 925.00€ - Sold by Thomann In Stock (24 hours) Similar Items

	Befaco : Joystick - Input / output for X and Y axis with range and offset control- Each axis can work as a bipolar attenuator or DC source- 2 Gate outputs with trigger button- Power requirement: 25 mA (+12 V) / 10 mA (-12 V)- Width: 12 HP- Depth: 35 mm 153.00€ - Sold by Thomann In Stock (24 hours) Similar Items

	Soundmachines : LS1 Lightplane - Soundmachines LS1 Lightplane; Eurorack module; Tree-Dimensional Touch Controller for CV and gate signals; CV outputs for X and Y poistion, pressure (Z) and gate output; capacitive surface with LED meter; Live Mode, Hold Mode and Loop Mode with 4.5 sec. recording time; CV range selectable via jumpe...(+) - Soundmachines LS1 Lightplane; Eurorack module; Tree-Dimensional Touch Controller for CV and gate signals; CV outputs for X and Y poistion, pressure (Z) and gate output; capacitive surface with LED meter; Live Mode, Hold Mode and Loop Mode with 4.5 sec. recording time; CV range selectable via jumper (0V to +5V or 0V to +10V); power consumption: 210mA (+12V) / 8mA (-12V); width: 16 HP; depth: 32mm 107.00€ - Sold by Thomann In Stock (24 hours) Similar Items Soundmachines

	Doepfer : A-173-1/2 (8 comments) - Module combination outputs the manually generated 1V / octave control voltage and up to 15 different gate and trigger signals- "Send" module A-173-1 with 18 keys and octave switch- "Receive" module A-173-2 with 15 gate / trigger outputs, 1V / octave compatible CV output and normal gate output- Out...(+) - Module combination outputs the manually generated 1V / octave control voltage and up to 15 different gate and trigger signals- "Send" module A-173-1 with 18 keys and octave switch- "Receive" module A-173-2 with 15 gate / trigger outputs, 1V / octave compatible CV output and normal gate output- Outputs individually switchable between gate or toggle mode- Learn Function allows you to decouple individual keys from the CV path- Width: 2 x 6 HP- Depth: 45 mm- Power requirement: +100 mA (+12 V) / -10 mA (-12 V) 192.00€ - Sold by Thomann In Stock (24 hours) Similar Items

	Doepfer : A-174-4 3D Joystick (3 comments) - Joystick with X-/Y-axis- Rotation function (Z-axis) and gate button- X-, Y- and Z-axis self-resetting via spring mechanism- CV outputs for X-, Y- and Z-axis in non-inverted and inverted form (range: -5 V to +5 V)- CV offset controller per axis- 4 Quadrant CV outputs (Q1-Q4) with adjustable overlap...(+) - Joystick with X-/Y-axis- Rotation function (Z-axis) and gate button- X-, Y- and Z-axis self-resetting via spring mechanism- CV outputs for X-, Y- and Z-axis in non-inverted and inverted form (range: -5 V to +5 V)- CV offset controller per axis- 4 Quadrant CV outputs (Q1-Q4) with adjustable overlap (range: 0 V to +10 V)- Gate output- Current requirement: 50 mA (+12 V) / 20 mA (-12 V)- Width: 12 HP- Depth: 50 mm- Joystick height: 70 mm 186.00€ - Sold by Thomann In Stock (24 hours) Similar Items

< 1 21