| Intellijel Designs : Mult Multiple Module- 2x 4-Way passive - Width: 2 TE / HP - Depth: 27 mm - Current consumption: 0 mA ( 12 V) / -0 mA (-12 V) |
|
| Doepfer : A-180-2 Multiples (87 comments)Passive Multi-Port Distributor- 8x Interconnected jacks - Sockets are divided into 2x quadruple groups; but can also be modified to an eight-multiple (soldering bridge on the circuit board) - Width: 2HP |
|
| Doepfer : A-180-2 Vintage Edition (19 comments)Passive Multi-Connector- Eight interconnected jacks can be split into 2 groups (solder bridge on the assembly side) - Width: 2 HP - Vintage edition with black front plate |
|
| Behringer : 994 Multiples Behringer 994 Multiples; Eurorack module; passive multiple; dual 1-to-3 multiple; width: 4 HP; depth: 23 mm |
|
| Intellijel Designs : Buff Mult 1U (2 comments)Multiple Module- Twice 1 x 4 buffered multiplier module - Output of the first multiple is normalized to the input of the second - Width: 14 HP - Depth: 29 mm - Power requirement: 4 mA ( 12 V) / -17 mA (-12 V) |
|
| Doepfer : A-181 Multiples 2 (8 comments)
Multi-Port Distributor- Contains two 6.3mm / 3.5mm multiples, each with a 6.3mm and 2 x 3.5mm jack jacks - One multiple is mono (ie the two small jack sockets are connected to the tip of the 6.3 mm jack socket) - The other is connected in stereo (ie one of the two small jacks is connected to the tip...(+) Multi-Port Distributor- Contains two 6.3mm / 3.5mm multiples, each with a 6.3mm and 2 x 3.5mm jack jacks - One multiple is mono (ie the two small jack sockets are connected to the tip of the 6.3 mm jack socket) - The other is connected in stereo (ie one of the two small jacks is connected to the tip, the other to the ring of the 6.3 mm jack). |
|
| Doepfer : A-180-3 Dual Buffered Multiple (17 comments)Synthesizer module- Double buffered 1-in-3 multiple - For buffering and duplication of CV and audio signals - Width: 4 TE / 4HP / 20.0 mm |
|
| Doepfer : A-180-4 Eurorack Module- Quad buffer - Contains 4 separate control voltage buffers - For use with the outputs of switches, quantizers, sequencers, S and H modules, and more - Outputs are normalised to the next input - Use as a buffered multiple possible - Width: 4 HP |
|
| Doepfer : A-182 (7 comments)Multiple Distribution Module- Passive - Each socket can be switched in 3 variants (1,2, off) - 8-Way multipin: all switches on the left or right - Two times 4-fold multipin: four on 1, four on 2 - Eurorack format - Width: 6 HP - Depth: 20 mm - Power Requirement: 0 mA ( 12V) / -0mA (-12V) |
|
| Erica Synths : Link Eurorack Module- Contains 5 independent adapters from 3.5 mm mono jack to 6.3 mm mono jack - Passive construction - no power supply required - Width: 8 TE |
|
| Doepfer : A-115 (14 comments)
Audio Divider ModuleModule A-115 is a four-stage frequency divider. The frequency of a signal at the input is halved (half frequency = 1st suboctave), quartered (1/4 frequency = 2nd suboctave), etc. In this way, the DIVIDER generates four sub-octaves (F / 2 to F / 16).- Width: 8HP / 40.3 mm - Depth:...(+) Audio Divider ModuleModule A-115 is a four-stage frequency divider. The frequency of a signal at the input is halved (half frequency = 1st suboctave), quartered (1/4 frequency = 2nd suboctave), etc. In this way, the DIVIDER generates four sub-octaves (F / 2 to F / 16).- Width: 8HP / 40.3 mm - Depth: 40 mm (measured from the rear of the front plate) - Power requirements: 20 mA (12V) / -10 mA (-12V) |
|
| Erica Synths : Erica Synths Pico Mult2; Eurorack module; buffered precision multiple; can be used as 1-to-3 and 1-to-2 multiple; works as 1-to-5 multiple if In B is unpatched; power consumption: 20mA (+12V) / 14mA (-12V); width 3 HP; depth: 35 mm |
|
| Joranalogue Audio Design : Link 2 Joranalogue Audio Design Link 2; Eurorack module; buffered precision multiple; 1-to-3 or 1-to-6 multiple with active electronics for audio and CV signals; accurate distribution of pitch-CV to the last cent; power consumtion: 20mA (+12V / 20mA (-12V); width: 2 HP; depth: 40 mm |
|
| Behringer : 173 Quad Gate/Multiples Behringer 173 Quad Gate/Multiples; Eurorack module; contains 4 CV-controlled switches; each switch with buffered signal-input and signal-output and two Gate inputs (positive and inverted); 6 passive sets of 4 parallel jacks; power consumption: 40mA (+12V) / 40mA (-12V); width: 16 HP; depth: 28mm |
|
| Erica Synths : Black Multi Erica Synths Black Multi; Eurorack module; buffered precision multiple; 1-to-3 or 1-to-6 configuration; +/-1V offset-switch per section e.g. for octaving oscillators; power consumption: 25mA (+12V) / 25mA (-12V); width: 4 HP; depth: 25mm |
|
| ACL : Multi II ACL Multi II; Eurorack modue; multiple with two seperate sections; passive 1-to-6 multiple; buffered multiple with normal and inverted input and 5 outputs; power consumption: 1 mA / 12 V) / 1 mA (-12V); width: 6 HP; depth: 25 mm |
|
| 1010music : MX4 (1 comments)MIDI Signal Splitter- A MIDI source can be forwarded to up to four MIDI destinations at the same time - Width: 3 HP - Depth: Compatible with skiff cases - Power requirement: 4mA ( 12V) / -0mA (-12V) - Includes two mini-jack adapters to 5-pin DIN-MIDI and two balanced mini-jack cables |
|
| Intellijel Designs : Mult 1U Multiple Module- Dual 1x5 passive - Width: 14 HP - Power Requirements: 0 mA |
|
| Make Noise : Mult (3 comments)Passive Multiple Eurorack Module- Allows you to send a signal to multiple destinations, as well as to combine clock-, gate-, and pulse signals (Gate Combiner) - Configurable as 3 x 3, 1 x 5, and 1 x 3 or 1 x 7 multiples - Power is not required - Dimensions (W x D): 4 HP x 20 mm |
|
| Intellijel Designs : Buff Mult (1 comments)Twice 1 x 3 Buffered Multiplier Module- Output of the first multiple is normalised to the input of the second - Width: 2 HP - Depth: 39 mm - Power requirement: 4 mA ( 12 V) / -17 mA (-12 V) |
|