| Behringer : 923 Filters Behringer 923 Filters; Eurorack module; analog dual filter and noise generator; separate lowpass and highpass filters; for each filter: manual cutoff control, audio input and audio output; 2 outputs for white noise; 2 outputs for pink noise; width: 8 HP |
|
| Doepfer : A-102 (8 comments)
Diode Low Pass Filter- Manual adjustment of the filter frequency - 3 CV inputs - CV1 without, CV2 - Input level control - Manually adjustable resonance up to self oscillation - Width: 8HP / 8HP / 40.3 mm - Depth: 60 mm (measured from the rear of the front panel) - Power Requirements: 30 mA (12 V) / ...(+) Diode Low Pass Filter- Manual adjustment of the filter frequency - 3 CV inputs - CV1 without, CV2 - Input level control - Manually adjustable resonance up to self oscillation - Width: 8HP / 8HP / 40.3 mm - Depth: 60 mm (measured from the rear of the front panel) - Power Requirements: 30 mA (12 V) / -10 mA (-12 V) |
|
| Doepfer : A-106-5 SEM Filter (38 comments)Filter- 12 dB Multi-mode filter, in which the circuit of the SEM module is used - Width: 8HP 40.3 mm - Depth: 55 mm (measured from the rear of the front panel) - Power requirements: 30 MA ( 12V) / -20 mA (-12V) |
|
| Doepfer : A-103 18DB Low Pass Filter (15 comments)
18 dB Low-Pass Filter for A 100 Modular System- Voltage-controlled low-pass filter with an 18 dB / octave slope - The circuit is based on a modified transistor ladder (Moog ladder), and corresponds to the low-pass filter of the TB303 - Width: 8 HP / 40.3 mm - Depth: 55 mm (measured from the rear sid...(+) 18 dB Low-Pass Filter for A 100 Modular System- Voltage-controlled low-pass filter with an 18 dB / octave slope - The circuit is based on a modified transistor ladder (Moog ladder), and corresponds to the low-pass filter of the TB303 - Width: 8 HP / 40.3 mm - Depth: 55 mm (measured from the rear side of the front panel) - Power requirement: 30 mA ( 12 V) / -10 mA (-12 V) |
|
| Doepfer : A-124 Wasp Filter SE Wasp Filter- Special edition - Special 12 dB multimode filter - Circuit technology of the "EDP Wasp" - Black front - Yellow pot caps - Width: 8 HP - Depth: 45 mm - Power requirements: 30 mA ( 12 V)/-10 mA (-12 V) |
|
| Doepfer : A-124 Wasp Filter Wasp Filter- Special 12 dB multimode filter - Circuit design of the "EDP Wasp" - Width: 8 HP - Depth: 45 mm - Power requirement: 30 mA ( 12 V) / -10 mA (-12 V) |
|
| Doepfer : A-106-5 SEM Filter Special Ed. (11 comments)Filter- 12 dB Multi-mode filter, in which the circuit of the SEM module is used - Cream-coloured front panel and black knobs - Width: 8HP 40.3 mm - Depth: 55 mm (measured from the rear of the front panel) - Power requirements: 30 MA ( 12V) / -20 mA (-12V) |
|
| Doepfer : A-101-2 Vactrol Lowpass Gate (16 comments)
Vactrol lowpass gate- Combination of low-pass filter (LP) and VCA - Based on the idea of the Buchla module 292 - The frequency (in LP mode) or the amplitude (in VCA mode) can be controlled manually (F / A) and via 2 external control voltage inputs: CV1 (without an attenuator) and CV2 (with attenuato...(+) Vactrol lowpass gate- Combination of low-pass filter (LP) and VCA - Based on the idea of the Buchla module 292 - The frequency (in LP mode) or the amplitude (in VCA mode) can be controlled manually (F / A) and via 2 external control voltage inputs: CV1 (without an attenuator) and CV2 (with attenuator) - Function of the module can be set via toggle switch (LP / VCA ) - Width: 8TE / 8HP / 40.3 mm - Depth: 50 mm (measured from the rear of the front panel) - Power requirements: 20 mA ( 12 V) / 20 mA (-12 V) |
|
| Doepfer : A-121-3
Doepfer A-121-3; Eurorack module; 12dB multimode VCF; manual controls for cutoff frequency, modulation depth, resonance and input level; CV inputs for cutoff (x2) and resonance; outputs for lowpass, bandpass, highpass and notch; power consumption: 40mA ( 12V) / 30mA (-12V); width: 4 HP; depth: 50 mm...(+) Doepfer A-121-3; Eurorack module; 12dB multimode VCF; manual controls for cutoff frequency, modulation depth, resonance and input level; CV inputs for cutoff (x2) and resonance; outputs for lowpass, bandpass, highpass and notch; power consumption: 40mA ( 12V) / 30mA (-12V); width: 4 HP; depth: 50 mm |
|
| Behringer : 121 Dual VCF
Behringer 121 Dual VCF; Eurorack Module; Authentic reproduction of original "System 100M circuitry; 2 lowpass filters feature cutoff frequency and resonance controls; Each filter comes with 3 audio outputs and 3 CV inputs with attenuator; Each VCF features a additional switchable 3-mode high pass fi...(+) Behringer 121 Dual VCF; Eurorack Module; Authentic reproduction of original "System 100M circuitry; 2 lowpass filters feature cutoff frequency and resonance controls; Each filter comes with 3 audio outputs and 3 CV inputs with attenuator; Each VCF features a additional switchable 3-mode high pass filter; 3-channel mixer per VCF allows independent mixing of all input signals; 18 controls and switches give you real-time access to all important parameters; current: 40mA (+12V) / 40mA (-12V); width: 16 HP |
|
| Dreadbox : Antidote
Dreadbox Antidote; eurorack module; string module based on analog Karplus-Strong synthesis; 512-stage BBD chip; onboard noise generator with variable decay; decay behavior similar to a struck string; precise tracking over 5 octaves (from C0 to B4); 2 low pass filters; output filter can be used as lo...(+) Dreadbox Antidote; eurorack module; string module based on analog Karplus-Strong synthesis; 512-stage BBD chip; onboard noise generator with variable decay; decay behavior similar to a struck string; precise tracking over 5 octaves (from C0 to B4); 2 low pass filters; output filter can be used as low pass gate; can be used as chorus, flanger or comb filter effect via input for external signal sources; 3.5mm jack connectors; power consumption: 92mA (+12V) / 43mA (-12V); width: 10TE; depth: 35mm |
|
| Behringer : 904B VC High Pass Filter Behringer 904B VC High Pass Filter; Eurorack module; analog -24dB/Oct. highpass filter; 2 selectable frequency ranges; 3 CV inputs for filter cutoff frequency; power consumption: 55mA (+12V) / 55mA (-12V); width: 8 HP; depth: 43mm |
|
| Behringer : 904A VC Low Pass Filter Behringer 904A VC Low Pass Filter; Eurorack module; analog -24dB/Oct. lowpass filter with resonance; 3 selectable frequency ranges; 3 CV inputs for filter cutoff frequency; power consumption: 65mA (+12V) / 50mA (-12V); width: 8 HP; depth: 38mm |
|
| Verbos Electronics : Noise & Filter Verbos Electronics Noise & Filter; Eurorack module; Noisegenerator and 4-band fixed Filterbank; white noise is normalized to the Filterbak input; Filterbank frequency-bands: 4,4kHz; power consumption: 34mA (+12V) / 27mA (-12V); width: 4 HP; depth: 27mm |
|
| Doepfer : A-101-6 (1 comments)Six Stage Opto FET VCF- New filter module in which so-called opto FETs are used to control the filter frequency - Dimensions (W x D): 40.3 mm (8 HP) x 65 mm - Power requirement: 40 mA |
|
| Doepfer : A-120 (14 comments)
24 dB Low Pass 1 (VCF1)Module A-120 is a voltage-controlled 24 dB low-pass filter, which filters out the high frequency components from a sound spectrum while allowing the low frequencies to pass unhindered. The cut-off frequency (corner frequency) determines the point at which this effect occurs. T...(+) 24 dB Low Pass 1 (VCF1)Module A-120 is a voltage-controlled 24 dB low-pass filter, which filters out the high frequency components from a sound spectrum while allowing the low frequencies to pass unhindered. The cut-off frequency (corner frequency) determines the point at which this effect occurs. They can be set or modulated both manually and via control voltages (filter modulation, with an LFO for example). The VCF1 is configured as a "transistor cascade" with an edge slope of -24 dB / octave, which is also used in various Moog synthesizers, This results in the typical, "legendary" Moog sound. The resonance (emphasis) can be adjusted at the VCF 1 to the point of self-oscillation. In this case, the filter operates as a sinusoidal oscillator.- 24 dB low pass 1 (VCF1) - Voltage-controlled 24 dB low-pass filter - Width: 8TE / 40.3 mm - Depth: 65 mm (measured from the back of the front panel) - Power Requirement: 30mA (12V) / -20mA (-12V) |
|
| Doepfer : A-105 (13 comments)24 dB Low Pass Filter SSM- Based on the chip SSM2044 - Width: 8 TE / 8 HP / 40.3 mm - Depth: 45 mm (measured from the rear of the front panel) - Power Requirements: 30 mA (12 V) / A -20 m (-12 V) |
|
| Doepfer : A-121-2 (2 comments)
12 dB multi-mode filter- Eurorack module - Voltage-controlled multi-mode filter with a slope of -12 dB / octave - 4 filter outputs with different filter characteristics available at the same time: lowpass, bandpass, highpass and bandstop (notch) - Cut-off frequency (corner frequency) determines the ...(+) 12 dB multi-mode filter- Eurorack module - Voltage-controlled multi-mode filter with a slope of -12 dB / octave - 4 filter outputs with different filter characteristics available at the same time: lowpass, bandpass, highpass and bandstop (notch) - Cut-off frequency (corner frequency) determines the point at which the respective filter effect occurs - Resonance (Emphasis) Q can be set manually and via control voltage (voltage-controllable resonance) - Width: 8 TE / 8 HP / 40.3 mm - Depth: 50 mm - Power requirement: 40 mA ( 12 V) / -40 mA (-12 V) |
|
| Doepfer : A-120 Vintage Edition (3 comments)
24 dB Low Pass 1 (VCF1)Module A-120 is a voltage-controlled 24 dB low-pass filter, which filters out the high frequency components from a sound spectrum while allowing the low frequencies to pass unhindered. The cut-off frequency (corner frequency) determines the point at which this effect occurs. T...(+) 24 dB Low Pass 1 (VCF1)Module A-120 is a voltage-controlled 24 dB low-pass filter, which filters out the high frequency components from a sound spectrum while allowing the low frequencies to pass unhindered. The cut-off frequency (corner frequency) determines the point at which this effect occurs. They can be set or modulated both manually and via control voltages (filter modulation, with an LFO for example).- Vintage edition with black front panel - Voltage-controlled 24 dB low-pass filter - Black front panel - Width: 8TE / 40.3 mm - Depth: 65 mm (measured from the back of the front panel) - Power requirements: 30mA (12V) / -20mA (-12V) |
|
| Doepfer : A-123-2 Eurorack Module- Voltage-controlled high-pass filter - 4 Separate filter outputs with different slopes: -6, -12, -18, -24 (dB / oct.) - Resonance voltage controllable - Level control for input signal - Power requirement: 30 mA ( 12 V) / 30 mA (-12 V) - Width: 8 TE - Depth: 45 mm |
|