| Marshall : Studio Vintage SV20H (111 comments)
- Preamp based on the classic 1959 SLP- 1 Channel with 4 separate inputs- Power: 20 W with power reduction to 5 W- Tubes: 2x ECC83, 1x ECC83 (Phase Splitter), 2x EL34- DI out- Serial FX loop- Dimensions: 500 x 240 x 230 mm- Weight: 9.25 kg |
|
| Marshall : MR1960 A (98 comments)
- All-rounder speaker cabinet that supports a wide range of effects- Angled design- Speakers: 4 x Celestion G12T-75 vintage- Closed cabinet construction- Power rating: 150 W (mono) resp. 300 W (stereo)- Impedance: 16/4 Ohm (mono) or 8 Ohm (stereo)- Connectors: 2 x 6.3 mm jack- Housing material: Birc...(+) - All-rounder speaker cabinet that supports a wide range of effects- Angled design- Speakers: 4 x Celestion G12T-75 vintage- Closed cabinet construction- Power rating: 150 W (mono) resp. 300 W (stereo)- Impedance: 16/4 Ohm (mono) or 8 Ohm (stereo)- Connectors: 2 x 6.3 mm jack- Housing material: Birch plywood- 4 Castors- Two side shell handles- Dimensions: (W x H x D): 770 x 754 x 366 mm- Weight: 36.4 kg- Colour: Black- Incl. speaker cable |
|
| Marshall : MR1960AV (100 comments)
- The classic from the '60s- Equipped with four Celestion G12 vintage speakers- Warmer sound than the previous models- Focused sound reminiscent of the late eighties- Slanted design- 4 x Celestion G12 vintage speakers- Closed cabinet construction- Power rating: 140 W (mono) or 280 W (stereo)- Impeda...(+) - The classic from the '60s- Equipped with four Celestion G12 vintage speakers- Warmer sound than the previous models- Focused sound reminiscent of the late eighties- Slanted design- 4 x Celestion G12 vintage speakers- Closed cabinet construction- Power rating: 140 W (mono) or 280 W (stereo)- Impedance: 16/4 Ohm (mono) or 8 Ohm (stereo)- Connectors: 2 x 6.3 mm jack- Enclosure material: Birch plywood- 4 Castors- Two side shell handles- Dimensions: (W x H x D): 770 x 754 x 366 mm- Weight: 41 kg- Colour: Black- Incl. speaker cable |
|
| Marshall : DSL20HR (161 comments)
- Reissue series - authentic DSL sound- Power: 20W- 2 Footswitchable channels with classic gain and ultra gain- Preamp tubes: 3x ECC83- Power tubes: 2x EL34- Tone Shift key for centre configuration- Bass switch that complements a resonant bass boost- Independent volume and gain controls for both cha...(+) - Reissue series - authentic DSL sound- Power: 20W- 2 Footswitchable channels with classic gain and ultra gain- Preamp tubes: 3x ECC83- Power tubes: 2x EL34- Tone Shift key for centre configuration- Bass switch that complements a resonant bass boost- Independent volume and gain controls for both channels- Common sound control for treble, mid and bass- Emulated line output- Serial FX loop- Including footswitch |
|
| Marshall : DSL5CR (97 comments)- |
|
| Marshall : JVM410H (176 comments)
- Power: 100 W- 4 channels with all-tube technology - no semiconductor in signal path- Preamp tubes: 5 x ECC 83- Power amp tubes: 4 x EL34- Individual 3-band EQ as well as gain and volume for each channel- 12 basic sounds can be chosen directly via foot switch or MIDI- EL34 power amplifier with pres...(+) - Power: 100 W- 4 channels with all-tube technology - no semiconductor in signal path- Preamp tubes: 5 x ECC 83- Power amp tubes: 4 x EL34- Individual 3-band EQ as well as gain and volume for each channel- 12 basic sounds can be chosen directly via foot switch or MIDI- EL34 power amplifier with presence and resonance control- 2 switchable and programmable master volume controls- Programmable parallel FX loop with hardware bypass- Digital reverb with individual controls for each channel- Series insert loop with hardware bypass circuit- Emulated DI out- MIDI IN and MIDI THRU- Dimensions:: 740 x 310 x 215 mm- Weight: 22 kg- Foot switch included- Suitable dust cover: Article no. 150488 (not included)- Suitable case: Article no. 227873 (not included) |
|
| Marshall : MX412AR (32 comments)- Slant design- Loudspeakers: 4 x 12" Celestion G12E- Power rating: 240 W- Impedance: 16 Ohm- Dimensions (W x H x D): 770 x 755 x 365 mm- Weight: 36.3 kg- Includes loudspeaker cable |
|
| Marshall : DSL20CR (93 comments)
- Reissue series - authentic DSL sound- Power: 20W- 2 Footswitchable channels with classic Gain and Ultra Gain- Equipped with: 12" Celestion Seventy-80 speakers- Pre-amp tubes: 3x ECC83- Power tubes: 2x EL34- Tone-Shift button for center configuration- Bass switch that supplements a resonant Bass Bo...(+) - Reissue series - authentic DSL sound- Power: 20W- 2 Footswitchable channels with classic Gain and Ultra Gain- Equipped with: 12" Celestion Seventy-80 speakers- Pre-amp tubes: 3x ECC83- Power tubes: 2x EL34- Tone-Shift button for center configuration- Bass switch that supplements a resonant Bass Boost- Independent Volume and Gain controls for both channels- EQ controls for Treble, Mid and Bass- Emulated Line output- Series FX-loop- Includes footswitch |
|
| Marshall : Studio Classic SC20H (55 comments)
- Preamp based on the classic JCM 800 2203- 20 Watts with power reduction to 5 watts- Tubes: 2x ECC83, 1x ECC83 (Phase Splitter), 2x EL34- Controls: Preamp and Master Volume, Treble, Mid, Bass and Presence- 1 Channel with high and low sensitivity inputs- DI out- Serial FX loop- Dimensions: 510 x 240...(+) - Preamp based on the classic JCM 800 2203- 20 Watts with power reduction to 5 watts- Tubes: 2x ECC83, 1x ECC83 (Phase Splitter), 2x EL34- Controls: Preamp and Master Volume, Treble, Mid, Bass and Presence- 1 Channel with high and low sensitivity inputs- DI out- Serial FX loop- Dimensions: 510 x 240 x 240 mm- Weight: 9.7 kg- Suitable case: Art.501854 (not included in delivery) |
|
| Marshall : Studio Vintage SV212 Cabinet (31 comments)- 2x 12" Celestion V-Type- Power handling: 140 Watt- Impedance: 8 Ohm- Dimensions: 755 x 540 x 320 mm- Weight: 23.8 kg |
|
| Marshall : 1959 HW (17 comments)- "Jimi Hendrix" Signature- Power: 100 W- 3x ECC 83 Tubes- 4x EL34 Tubes- Completely handmade- 2 Input channels- Input patching possible- 2 Speaker outputs with 4, 8, 16 ohm impedance- Voltage selector- Weight: 21 kg |
|
| Marshall : MX212AR (45 comments)- 2x 12" Celestion Seventy Eight- Power rating: 160 W- Impedance: 8 Ohm- Dimensions (W x H x D): 540 x 760 x 320 mm- Weight: 23 kg |
|
| Marshall : MR1960AX (21 comments)- 100 Watts- 16 Ohm- 4x 12" Celestion G12M/25 "Greenback" Speaker- Slant design- Optimum resonance performance- Coarsely structured fabric (grey chequered)- Includes four screwable castors- Weighs just 37.7 kg- Dimensions: 760 x 830 x 380 mm- Includes loudspeaker cable |
|
| Marshall : MS-2 (851 comments)
- Transistor amplifier with belt clip- Ideal for on the road or at home- 1 Channel- Power: 1 Watt- Equipment: 1x 2" speaker- Control: Volume, Tone- Switch: Off / On / Overdrive- Instrument input: 6.3 mm stereo jack- Headphone / preamp output: 6.3 mm stereo jack- Mains adapter connection: Hollow fema...(+) - Transistor amplifier with belt clip- Ideal for on the road or at home- 1 Channel- Power: 1 Watt- Equipment: 1x 2" speaker- Control: Volume, Tone- Switch: Off / On / Overdrive- Instrument input: 6.3 mm stereo jack- Headphone / preamp output: 6.3 mm stereo jack- Mains adapter connection: Hollow female plug 5.5 x 2.1 mm Minus polarity inside- Power supply with a 9 V battery or via 9 V DC mains adapter (both not included in delivery - suitable mains adapter: art. 409939)- Dimensions (W x D x H): 110 x 60 x 140 mm- Weight: 0.34 kg- Colour: Black |
|
| Marshall : MX112R (41 comments)- Equipped with: 1x12 Celestion Seventy Eight Speaker- Rated power: 80 Watt- Impedance: 16 ohms- Dimensions (WxHxD): 500 x 470 x 290 mm- Weight: 13.5 kg |
|
| Marshall : Studio Vintage SV112 Cabinet (26 comments)- 12" Celestion V-Type- Power handling: 70 Watt- Impedance: 16 Ohm- Dimensions: 510 x 490 x 245 mm- Weight: 12.2 kg |
|
| Marshall : JVM410H Bundle 3 (34 comments)
Marshall JVM410H Guitar amplifier head Marshall 1960AV 412 Cabinet Power: 100 W-
4 channels with all-tube technology - no semiconductor in signal path-
Preamp tubes: 5 x ECC 83-
Power amp tubes: 4 x EL34-
Individual 3-band EQ as well as gain and volume for each channel-
12 basic sounds can be c...(+) Marshall JVM410H Guitar amplifier head Marshall 1960AV 412 Cabinet Power: 100 W-
4 channels with all-tube technology - no semiconductor in signal path-
Preamp tubes: 5 x ECC 83-
Power amp tubes: 4 x EL34-
Individual 3-band EQ as well as gain and volume for each channel-
12 basic sounds can be chosen directly via foot switch or MIDI-
EL34 power amplifier with presence and resonance control-
2 switchable and programmable master volume controls-
Programmable parallel FX loop with hardware bypass-
Digital reverb with individual controls for each channel-
Series insert loop with hardware bypass circuit-
Emulated DI out-
MIDI IN and MIDI THRU-
Dimensions:: 740 x 310 x 215 mm-
Weight: 22 kg-
Foot switch included-
Suitable dust cover: Article no. 150488 (not included)-
Suitable case: Article no. 227873 (not included) the sssnake PPS1015 Guitar Speaker Cabinet-
The classic from the '60s-
Equipped with four Celestion G12 vintage speakers-
Warmer sound than the previous models-
Focused sound reminiscent of the late eighties-
Slanted design-
4 x Celestion G12 vintage speakers-
Closed cabinet construction-
Power rating: 140 W (mono) or 280 W (stereo)-
Impedance: 16/4 Ohm (mono) or 8 Ohm (stereo)-
Connectors: 2 x 6.3 mm jack-
Enclosure material: Birch plywood-
4 Castors-
Two side shell handles-
Dimensions: (W x H x D): 770 x 754 x 366 mm-
Weight: 41 kg-
Colour: Black-
Incl. speaker cable |
|
| Marshall : MR1960AHW (49 comments)- Handwired reissue cabinet- Loudspeaker: 4 x12 Celestion G12H30- Rated power: 120 W- Impedance: 16 Ohm- Brown basket weave grill- Logo: Gold, small- Dimensions: (W x H x D): 760 x 830 x 360 mm- Weight: 37.7 kg- Incl. Castors and loudspeaker cable |
|
| Marshall : DSL1CR (90 comments)
- Reissue Series - Authentic DSL Sound- Power: Low-power circuit from 1 W to 0.1 W- 2 Foot-switchable channels with classic gain and ultra gain- Equipment: 8" Celestion Eight-15 loudspeakers- Tube equipment: 1x ECC82 and 2x ECC83- Tone-shift key for center configuration- Independent volume and gain ...(+) - Reissue Series - Authentic DSL Sound- Power: Low-power circuit from 1 W to 0.1 W- 2 Foot-switchable channels with classic gain and ultra gain- Equipment: 8" Celestion Eight-15 loudspeakers- Tube equipment: 1x ECC82 and 2x ECC83- Tone-shift key for center configuration- Independent volume and gain controls for both channels- Common tone control for treble, midrange and bass- Emulated line output- Serial FX loop- Dimensions (W x H x D): 360 x 340 x 215 mm- Weight: 7.9 kg- Includes foot-switch |
|