Successor model of the Rumberger K1X- Sound optimisation through improved diaphragm mounting- More natural sound due to new filter technology- K1X II pickup- XLR phantom power adapter PA-F1 with 2.5 m connection cable- AJM adapter (jack/MCX for radio operation)- Mounting sleeve with O-ring- Sealing plug- Special grease- Carrying case- Operating and installation instructions

Suitable for a variety of instruments- Long gooseneck- Modular design offers a high degree of flexibility for different mounting options and capsules- Directional characteristic: Cardioid- Frequency response: 40 - 20,000 Hz- Switchable low-cut filter at 80 Hz- 200 Ohm- Max. SPL (sound pressure level): 159 dB- Open circuit sensitivity: -49 dB (3.5 mV) re 1V at 1 PA- 11 - 52 V phantom power necessary- Cable length: 4 m- Detachable XLR phantom adapter (HRS4M)- Capsule dimensions: 37.8 x 12.2 mm- Microphone weight: 14.5 g- ATM350 Microphone- AT8490L Gooseneck- AT8491U Universal clip-on mount- AT8543 Power module- Hardcase- AT8468 Violin mount

the t.bone Lucan System CC 200 RC Condenser instrument microphone- Easy installation with various instrument holders for many different instruments (not included)- Flexible gooseneck 120 mm for easy alignment on the instrument- Detachable cable with screw contact- 3-pin mini XLR plug for use with t.bone wireless systems (also suitable for Sirus and AKG wireless systems)- Polar pattern: Cardioid- Frequency range: 30 - 20.000 Hz- Sensitivity: -38 dB +/- 2 dB- Max. SPL: 130 dB- Signal-to-noise ratio: 71 dB- Impedance 100 Ohm- Distortion factor: < 1%- Cable length approx. 2 m- Incl. Windscreen, phantom power adapter (phantom power required) and hard case (with space for an optional holder)- Dimensions of the hard case (L x W x H): 26 x 13 x 7 cm the t.bone Lucan System CC 200 CH Microphone Holder- Clarinet-clip for the Lucan System CC 200 RC- For fixing on clarinets or similar instruments with a strong hook-and-loop tape up to a diameter of 65 mm

AKG PW45 Instrumental Set Band M UHF Wireless System- With pocket transmitter- 6 Switchable frequencies in the frequency range M 826 - 831 MHz (duplex gap)- Up to 6 systems in parallel- 9.5" diversity receiver with integrated antennas- Adjustable output volume- XLR out- Pocket transmitter operation with 1 x AA battery or rechargeable battery- Low-battery display- Noiseless switch on the transmitter- Includes power supply, MKG L cable and 1 x AA battery the t.bone Ovid System CC 100 RC Condenser Clip Microphone for The Ovid System- Easy installation with different instrument holders (optional - not included)- With phantom power adapter (phantom power required)- Detachable cable with screw contact- Directivity: Cardioid- Frequency range: 20 - 20,000 Hz- Flexible gooseneck for easy alignment on the instrument- 3-Pin mini XLR connector for operating with t.bone wireless systems - also suitable for AKG wireless systems- Length of gooseneck: 130 mm- Cable length: 1.2 m- Optional cables with Sennheiser EW and Shure TQG connector available separately (not included)- Foam windshield included the t.bone Ovid System Sax Clip Modular saxophone microphone clip for Ovid systems- Easy to install without tools- Black rubber end caps protect the instrument from damage- Locking screw- Also suitable for trumpet, trombone etc.- Not suitable for soprano saxophone