Gibson 70th Anniversary Les Paul Custom HPT Flame Trans Black, E-Guitar, Les Paul Custom, hand picked aaa flame maple top, solid mahogany body (swietenia macrophylla), five piece flame maple neck, ebony fretboard, 1959 Carmelita "C" neck shape, 22x historic medium jumbo frets, pearl custom inlays, 2...(+)
Gibson 70th Anniversary Les Paul Custom HPT Flame Trans Black, E-Guitar, Les Paul Custom, hand picked aaa flame maple top, solid mahogany body (swietenia macrophylla), five piece flame maple neck, ebony fretboard, 1959 Carmelita "C" neck shape, 22x historic medium jumbo frets, pearl custom inlays, 2 x custombucker alnico III unpotted, CTS 500k pots /w paper-in-oil capacitors, Grover kidney tuner, tune-o-matic bridge, aluminium stopbar, black chrome hardware, Custom Shop medallion (historically correct backplate in case), color: Trans Black, incl.case and certificate, made in USA,
Catalinbread Starcrash; Effects Pedal for Electric Guitar; Is based on, but not an exact replica of, the venerable "Face" circuit from the 70s. Featuring a gooey saturated fuzz circuit with a voltage starve circuit to gently increase harmonic content, you can dial in the transistor voltage that best...(+)
Catalinbread Starcrash; Effects Pedal for Electric Guitar; Is based on, but not an exact replica of, the venerable "Face" circuit from the 70s. Featuring a gooey saturated fuzz circuit with a voltage starve circuit to gently increase harmonic content, you can dial in the transistor voltage that best suits your playing.; Controls: Volume, Low-cut, Bias; LED: Effect On; Footswitches: Effect Bypass; Connections: Input (1/4" Jack), Output (1/4" Jack); Power Supply connector: Barrel Connector 5.5 x 2.1 mm, center negative; powered by a 9 V DC Power Supply (not included); suitable optional Power Supply: Item no. #409939; True Bypass; Dimensions (W x D x H): 60 x 110 x 50 mm (2,36" x 4,33" x 1,97"); Weight: 180 g (0,4 lbs); Made in USA; Note: Battery operation is not supported
Rockboard RPA 100 Power Attenuator, dummy load, max. input power 100 watts, 3 x separate inputs for 4/8/16 ohms, 1 x 3.5 mm / 1/8 AUX input, 2 x 6.3 mm / 1/4 speaker output (parallel), 1 x 6.3 mm / 1/4 line output, 1 x 3.5 mm / 1/8 headphones output, 1 x XLR-DI output, 1 x control for speaker lev...(+)
Rockboard RPA 100 Power Attenuator, dummy load, max. input power 100 watts, 3 x separate inputs for 4/8/16 ohms, 1 x 3.5 mm / 1/8 AUX input, 2 x 6.3 mm / 1/4 speaker output (parallel), 1 x 6.3 mm / 1/4 line output, 1 x 3.5 mm / 1/8 headphones output, 1 x XLR-DI output, 1 x control for speaker level, 1 x control for line out level, 1 x switch for cab sim bypass , 1 x switch for cabinet simulation 2 x 12 & 4 x 12 , 1 x 9V DC, 2.1 x 5.5 mm barrel plug, polarity (-) center, input voltage for operation of phones/DI/line outputs, 1 x fan, 1 x overload LED, dimensions (L x W x H) 180 x 160 x 125 mm / 7.09 x 6.30 x 4.92 (incl. feet & control knobs), weight 1545 g / 3.41 lbs.
Rockboard Power Adapter for ISO DC 1; AC power adapter multi-power supply , replacement adapter for the Rockboard Power MOD ISO DC 1, can be used in most regions of the world, output 24 VDC, 1.5 A, 2.1 x 5.5 mm barrel plug, polarity (-) center, input voltage 100 - 240 VAC, exchangeable multi-regiona...(+)
Rockboard Power Adapter for ISO DC 1; AC power adapter multi-power supply , replacement adapter for the Rockboard Power MOD ISO DC 1, can be used in most regions of the world, output 24 VDC, 1.5 A, 2.1 x 5.5 mm barrel plug, polarity (-) center, input voltage 100 - 240 VAC, exchangeable multi-regional plug adapters (EU, UK, US/CA, AU/NZ)
Rockboard Power MOD ISO DC 1; multi-power supply for e ects pedals, provides transformer isolated and highly filtered power slots, fits in a MOD slot on RockBoard pedalboards, compatible with most other pedalboards, detachable front plate for mounting on top or underneath pedalboards, advanced filte...(+)
Rockboard Power MOD ISO DC 1; multi-power supply for e ects pedals, provides transformer isolated and highly filtered power slots, fits in a MOD slot on RockBoard pedalboards, compatible with most other pedalboards, detachable front plate for mounting on top or underneath pedalboards, advanced filter technology prevents high frequency noise, external mains transformer prevents low frequency interference, input polarity protection, individual status LEDs and short circuit protection for all power slots, 2 x strain relief clamps for connected cables, input power: 24 VDC / 1.5 A , outputs: 8 x 9 VDC, 300 mA each / 1 x 9 VDC output, 500 mA / 1 x 5 VDC USB-C, 2000 mA, incl. 1 x 24 VDC power adapter (1.5 mA) with exchangeable multi-regional plug adapters (EU, UK, US/CA, AU/NZ), input voltage 100-240V AC, incl. 9 x RockBoard Flat Power Cable, 60 cm (for connecting e ects pedals), dimensions (L x W x H): 175 x 85 x 47 mm / 6.9" x 3.34" x 1.85" (with front plate) / 160 x 85 x 33 mm / 6.3" x 3.34" x 1.3" (without front plate), weight: 500 g / 1.1 lbs
Warm Audio Centavo; Effects Pedal for Electric Guitar; limited black edition; faithful replica of the most sought-after overdrive; the circuitry remains true to that of the vintage pedal with carefully selected components to achieve the authentic overdrive sound of the original; additional "MOD" swi...(+)
Warm Audio Centavo; Effects Pedal for Electric Guitar; limited black edition; faithful replica of the most sought-after overdrive; the circuitry remains true to that of the vintage pedal with carefully selected components to achieve the authentic overdrive sound of the original; additional "MOD" switch on the rear panel for a well-known modification that boosts the bass response by changing the value of the high-pass filter; Controls: Gain, Treble, output; LED: Effect On; Footswitches: Effect Bypass; Connections: Input (1/4" Jack), Output (1/4" Jack); Power Supply connector: Barrel Connector 5.5 x 2.1 mm, center negative; Current Draw: 40 mA; powered by a 9 V Battery or a 9 V DC Power Supply (not included); suitable optional Power Supply: Item no. #409939; Dimensions (W x D x H): 171 x 127 x 57 mm (6,73" x 5" x 2,24"); Weight: 900 g (1,98 lbs)
Fender 11-hole Strat SSS Pickguard AW; Pickguard for Stratocaster electric guitar with 3 single coils; 4-ply aAged White Moto; eleven screw holes; Made in the USA
Warwick Parts - Self-tapping Threaded PU Mounting Insert, with thread for pickup mounting, M 2.5 mm x 4.5 mm, Mounting diameter 5 mm, set of 4 pcs., suitable for metric pickup screws with M 2.5 thread (Art-Nr. SP 30705, SP 30706), Incl. 3 mm Hex Key
Grover 406NL6 Mini Locking Rotomatics Guitar Machine Heads, set for left-hand instruments, closed gear, ratio: 18:1, 6 pieces: 6-in-Line, treble side (right), same innovative engineering and classic design as the Original Locking Rotomatics, but with smaller buttons, axis diameter without mounting s...(+)
Grover 406NL6 Mini Locking Rotomatics Guitar Machine Heads, set for left-hand instruments, closed gear, ratio: 18:1, 6 pieces: 6-in-Line, treble side (right), same innovative engineering and classic design as the Original Locking Rotomatics, but with smaller buttons, axis diameter without mounting sleeve: 6 mm, nickel finish
Daddario PW-FLSB-04RD Flex Lock; Strap Lock system; for end pins of most manufacturers, no modification to the guitar required, attaches to any guitar strap for a secure fit, set of 4 pieces, color red
Daddario PW-FLSB-04BK Flex Lock; Strap Lock system; for end pins of most manufacturers, no modification to the guitar required, attaches to any guitar strap for a secure fit, set of 4 pieces, color black
Darkglass Midi Footswitch; 5-Button Midi Foot Switch; quick to set up with ready-to-use templates for Darkglass products; a more complex custom MIDI setup is also available with commands on the main and sub operational layers, simultaneous sending of several messages and more; easily configurable th...(+)
Darkglass Midi Footswitch; 5-Button Midi Foot Switch; quick to set up with ready-to-use templates for Darkglass products; a more complex custom MIDI setup is also available with commands on the main and sub operational layers, simultaneous sending of several messages and more; easily configurable through the Darkglass Suite; flexible powering through either a 9V DC or USB or using Darklass Amplifiers and the 1/4 plug or 7-PIN MIDI connector; Works as a Darkglass Super Intelligent Footswitch (no external power supply needed in this case) ; LED: 1-5; Footswitches: 1-5; Connections: Midi In (5-Pin), Midi Out/Thru (7-Pin), USB-C; Power Draw: 15 mA; Power Supply connector: Barrel Connector 5.5 x 2.1 mm, center negative; Dimensions: (W x D x H): 276 x 54 x 55 mm, (10,9" x 2,1" x 2,1"); Weight: 150 g (0,33 lbs)
Synergy DRECT; exchangeable all-tube pre-amp module for Synergy amplifiers; a homage to the legendary rectified amplifiers that have left an indelible mark on heavy rock for over three decades; Orange / Red Select Switch on Each Channel; a Three-Position Switch on the PCB allows you to configure the...(+)
Synergy DRECT; exchangeable all-tube pre-amp module for Synergy amplifiers; a homage to the legendary rectified amplifiers that have left an indelible mark on heavy rock for over three decades; Orange / Red Select Switch on Each Channel; a Three-Position Switch on the PCB allows you to configure the input Tube Bass Response to match the original Circuit of the selected Module; 12 x 12AX7 tubes; Two identical channels with Gain, Volume, Presence and 3-Band EQ; Made in USA
Guitar Grip Male Hand Blue Metallic Left; male hand shaped instrument wall hanger, left hand model, offers optimal support for instruments with symmetrical headstock or with higher heel on right side of headstock, manufactured from Polyresin, cushioned insert to protect the instrument neck, padded f...(+)
Guitar Grip Male Hand Blue Metallic Left; male hand shaped instrument wall hanger, left hand model, offers optimal support for instruments with symmetrical headstock or with higher heel on right side of headstock, manufactured from Polyresin, cushioned insert to protect the instrument neck, padded felt at the base to protect wall from damage, easy to install, including steel mounting post and a decorative mounting disc for wall mounting, swivels to adjust for most styles of headstocks, blue high gloss metallic finish, not recommended for instruments with nitro-cellulose finish, handmade in USA
Graph Tech PRL-9731-B0 Black; locking machine heads for electric guitar, right-hand set, closed construction, staggered posts (eliminates the need for a string tree), each machine head has its own gear ratio, calibrated for the respective string, half turn of any key is a semi-tone pitch change for ...(+)
Graph Tech PRL-9731-B0 Black; locking machine heads for electric guitar, right-hand set, closed construction, staggered posts (eliminates the need for a string tree), each machine head has its own gear ratio, calibrated for the respective string, half turn of any key is a semi-tone pitch change for each string, faster and more accurate tuning of each string, thumb wheel screw on the back to lock the strings, ratio: E - 12:1, B - 20:1, G - 35:1, D - 20:1, A - 24:1, E - 39:1, 6 pieces: 6-in-Line, bass side (left), 2-pin mounting, axis diameter without mounting sleeve: 6.0 mm (0.234"), mounting diameter with mounting sleeve: 10 mm (0.394"), incl. 4 sets of InvisoMatch standard mounting plates for use of existing screw holes, weight ca. 37.5 g / 0.083 lbs (single), Classic button, black finish
Manuel Rodriguez Cafe Cortado Eucalyptus; electric acoustic classical guitar; cutaway; solid spruce top, with central solid cedar stripes; sound hole on bass side as MR laser cutout; additional monitor side sound hole; Eucalyptus back and sides; body depth 93-98mm; genuine Spanish neck base, mahogan...(+)
Manuel Rodriguez Cafe Cortado Eucalyptus; electric acoustic classical guitar; cutaway; solid spruce top, with central solid cedar stripes; sound hole on bass side as MR laser cutout; additional monitor side sound hole; Eucalyptus back and sides; body depth 93-98mm; genuine Spanish neck base, mahogany neck with rosewood fingerboard, 24 frets; outs: asymmetrical, ergonomic neck foot for easy access to the high positions; body binding maple; Gewa armrest; nut width 52mm; Scale 650mm; nut bone; bridge inlay bone; pickup Manuel Rodríguez by ARTEC SQ-3 3-band EQ preamp with new Solidflex bridge pickup with built-in tuner; Hannabach 815HTC stringing; environmentally friendly water-based lacquer finish, gloss; incl. security locks; MR Premium leather straps and case, made in Europe
Manuel Rodriguez Cafe Cortado Rosewood; electric acoustic classical guitar; cutaway; solid spruce top, with central solid cedar stripes; sound hole on bass side as MR laser cutout; additional monitor side sound hole; Rosewood back and sides; body depth 93-98mm; genuine Spanish neck base, mahogany ne...(+)
Manuel Rodriguez Cafe Cortado Rosewood; electric acoustic classical guitar; cutaway; solid spruce top, with central solid cedar stripes; sound hole on bass side as MR laser cutout; additional monitor side sound hole; Rosewood back and sides; body depth 93-98mm; genuine Spanish neck base, mahogany neck with rosewood fingerboard, 24 frets; outs: asymmetrical, ergonomic neck foot for easy access to the high positions; body binding maple; Gewa armrest; nut width 52mm; Scale 650mm; nut bone; bridge inlay bone; pickup Manuel Rodríguez by ARTEC SQ-3 3-band EQ preamp with new Solidflex bridge pickup with built-in tuner; Hannabach 815HTC stringing; environmentally friendly water-based lacquer finish, satin matt; incl. security locks; MR Premium leather straps and case, made in Europe
Manuel Rodriguez Cafe Cortado Curly Walnut; electric acoustic classical guitar; cutaway; solid spruce top, with central solid cedar stripes; sound hole on bass side as MR laser cutout; additional monitor side sound hole; curly walnut back and sides; body depth 93-98mm; genuine Spanish neck base, mah...(+)
Manuel Rodriguez Cafe Cortado Curly Walnut; electric acoustic classical guitar; cutaway; solid spruce top, with central solid cedar stripes; sound hole on bass side as MR laser cutout; additional monitor side sound hole; curly walnut back and sides; body depth 93-98mm; genuine Spanish neck base, mahogany neck with rosewood fingerboard, 24 frets; outs: asymmetrical, ergonomic neck foot for easy access to the high positions; body binding maple; Gewa armrest; nut width 52mm; Scale 650mm; nut bone; bridge inlay bone; pickup Manuel Rodríguez by ARTEC SQ-3 3-band EQ preamp with new Solidflex bridge pickup with built-in tuner; Hannabach 815HTC stringing; environmentally friendly water-based lacquer finish, satin matt; incl. security locks; MR Premium leather straps and case, made in Europe
Mélangeur compact pour traitement parallèle- Avec un rapport de mélange fixe de 50/50 ("Dry/Wet")- Mélange jusqu'à deux retours stéréo avec le signal sec entrant dans une seule sortie stéréo- Transformateur isolé- Signal de niveau ligne +4 dB- LED de statut: Effect On- Commutateur au pied:...(+)
Mélangeur compact pour traitement parallèle- Avec un rapport de mélange fixe de 50/50 ("Dry/Wet")- Mélange jusqu'à deux retours stéréo avec le signal sec entrant dans une seule sortie stéréo- Transformateur isolé- Signal de niveau ligne +4 dB- LED de statut: Effect On- Commutateur au pied: Effect Bypass- Entrée mono sur Jack 6,3 mm- Sortie L/mono sur Jack 6,3 mm- Sortie R/stéréo sur Jack 6,3 mm- Send sur Jack stéréo 6,3 mm- FX1 Return sur Jack stéréo 6,3 mm- FX2 Return sur Jack stéréo 6,3 mm- Connexion pour alimentation secteur sur prise cylindrique 5,5 x 2,1 mm, polarité négative à l'intérieur- Consommation de courant: 100 mA- Fonctionne avec un bloc d'alimentation 9 V DC optionnel non fourni - bloc d'alimentation adapté 409939- Dimensions (L x P x H): 120 x 95 x 35 mm- Poids: 500 g- Fabriquée en Italie
Mélangeur d'effets stéréo rack 1U pour configurations de guitare- Splitter/mixeur/looper/commutateur avec fonctionnalité MIDI complète- 4 commutateurs de fonction- Compatible MIDI CC- Alimentation fantôme avec point d'alimentation pour contrôleur MIDI- LED de statut: Effect On- Commutateur au...(+)
Mélangeur d'effets stéréo rack 1U pour configurations de guitare- Splitter/mixeur/looper/commutateur avec fonctionnalité MIDI complète- 4 commutateurs de fonction- Compatible MIDI CC- Alimentation fantôme avec point d'alimentation pour contrôleur MIDI- LED de statut: Effect On- Commutateur au pied: Effect Bypass- Entrée mono/stéréo- Entrée mono/stéréo pour pédale de volume- 3x boucle d'effets en série mono/stéréo- 3x boucle d'effets parallèle mono/stéréo- 2x boucle d'effets parallèle AUX mono/stéréo- Sortie Dry isolée par transformateur- Entrée/sortie MIDI- Poids: 3000 g- Fabriqué en Italie
GUITARE & BASSE
BATTERIE & PERCU
PIANO & CLAVIER
VENT & CUIVRE
VIOLON & TRAD
STUDIO
LOGICIELS
SONO
LUMIERE
DEEJAY
MICROPHONES
EFFETS
VIDEO
FLIGHTCASES
CABLES
ACCESSOIRES
ENFANTS
CADEAUX
