| KandM : Thumbwheel Alu BK (245 comments)
Knurled Aluminium Disc- Lock nut knurled for microphone stands- Colour: Black |
|
| KandM : 217 (1134 comments)Thread Adapter- 3/8" inner threads- 5/8" 27 pitch outer threads |
|
| KandM : Drag Hinge Black (123 comments)Pivot Joint- Suitable for K&M 211, 211/1, 210/2- M8 Screw x 30- Washer- Clutch diameter 3/8"- 2 Rubber washers with fabric layer- T-bar locking screw nut- Colour: Black- Weight: 0.42 kg |
|
| Millenium : Bracket Orchestral Music Stand (145 comments)- Fits Thomann orchestra music stand (Article Nr 107195 - not included)- For pipe diameters of approx. 20 mm |
|
| KandM : Capstan Head Black (366 comments)Capstan Head Complete- Consisting: M5 of T-bar, M8 locking nut and M5 ball head- Suitable for K&M 211, 211/1, 252- Colour: Black |
|
| Global Truss : Rubber Foot for Barchair 5cm (7 comments)Replacement rubber cap- For bar stools- Size: 5 x 3 cm |
|
| Millenium : Bracket f Orchestal MusicStand (80 comments)- Suitable for Thomann orchestra music stand (Article Nr: 107195)- Internal diameter on top: approx. 27 mm- Internal diameter: approx. 30 mm |
|
| Roadworx : Beamer Tray (5 comments)- Roadworx Beamer Tray, tray for Beamer, Monitors etc, 35mm pole mount, dimensions: 420 x 380 mm, weight 3,2 Kg, steel |
|
| Millenium : Spare Screw for SLTS09 lowest (87 comments)Replacement Screw- Bottom set screw for the SLTS09- Threads: M8 |
|
| KandM : 216 Thread Adapter (652 comments)Thread Adapter- 5/8 " 27 Gg. Internal thread- 3/8 " External thread- Nickel- Weight: 22 g |
|
| Gravity : SA BTRAY 1 (19 comments)
- Fits on any 35 mm tube stand- Turns a standard speaker stand into a beamer stand- Set up dimension: 42 x 38 cm- Also suitable for laptops, blue-ray players, studio monitors and other equipment weighing up to 30 kg- Sturdy all-steel construction- Edges are raised 10 mm to increase bending stiffness...(+) - Fits on any 35 mm tube stand- Turns a standard speaker stand into a beamer stand- Set up dimension: 42 x 38 cm- Also suitable for laptops, blue-ray players, studio monitors and other equipment weighing up to 30 kg- Sturdy all-steel construction- Edges are raised 10 mm to increase bending stiffness and prevent equipment from falling down- Material: powder-coated steel- Tube holder for 35 mm diameter- Load capacity: Max. 30 kg- Supporting surface: 380 x 240 mm- Material thickness: 2 mm- Weight: 2.94 kg- Colour: Black |
|
| KandM : 215 (1154 comments)Thread Adapter- 1/2" and 3/8" inner threads- 5/8" 27 pitch outer threads- Galvanised- Weight: 10g |
|
| KandM : Kurbel (11 comments)- Fits cranking stand K&M 213- Colour: Black- Weight: 0.25 kg |
|
| KandM : Spare Part for Saxophone Stand (17 comments)- Suitable for saxophone stand 14300 and 144/10 |
|
| KandM : M6 x 22 Screw (253 comments)- Fits: K&M 21021, 201/6, 210/6, 210/8, 259/1, 27105, 271, 27195, 14300, 11980/55- K&M No. 01-82-838-55 |
|
| KandM : 3/8" Screw (163 comments)- Size 3/8" x 18.5- With K&M logo- Matches K&M microphone bar 23550- Weight: 20 g |
|
| KandM : Locking Button for KM214/6 (38 comments)- Screening complete for KM214 / 6 and K & M 21337 |
|
| KandM : Replacement Screw M8 x 38mm (136 comments)- For speaker stand e.g. 214/8- Size: M8 x 38 mm- With K&M logo- Weight: 50 g- Colour: Black |
|
| KandM : Thumbwheel Alu (159 comments)Thumb Wheel- Aluminium, polished- Locknut knurled for mic stands- Weight: 5 g |
|
| KandM : Thumbscrew M6x12 (183 comments)Knurled Thumb Screw- Dimensions M6 x 12- For 119/1, 14025, 18946, 18952, 18956, 210/2, 210/6, 210/9- Weight: 10 g |
|