| Radial Engineering : JS 2 (5 comments)- Jensen transmitter for high sound quality- Connections: XLR in / thru / out- Switchable 30 dB pad- Switchable Gnd / Lift- Robust metal housing- Installation of up to 8 units is possible with the 2 U / 19" Radial J-Rack |
|
| Radial Engineering : LX-3 (2 comments)- XLR / jack combo input- 3 XLR outputs- Switchable ground / lift per output- Jensen transformer- Frequency range: 20 - 20,000 Hz- Dynamic range: 140 dB- Robust metal housing- Dimensions: 84 x 127 x 48 mm |
|
| Palmer : PMS-02 Mikrofon Splitter (16 comments)
Microphone split box- 2-Channel splitter box 1" in 3"- Aluminium diecast housing- Per channel: One XLR input (female) parallel jack, XLR (male), two XLR outputs (male) via an isolating transformer 1: 1- Nominal level: 0 dB- Maximum level: +20 dB- Nominal impedance for inputs and outputs: 600 Ohm- Gr...(+) Microphone split box- 2-Channel splitter box 1" in 3"- Aluminium diecast housing- Per channel: One XLR input (female) parallel jack, XLR (male), two XLR outputs (male) via an isolating transformer 1: 1- Nominal level: 0 dB- Maximum level: +20 dB- Nominal impedance for inputs and outputs: 600 Ohm- Ground lift switch- Dimensions: 115 x 48 x 140 mm- Weight: 0.67 kg |
|
| Palmer : PGA 03 Y-Box Guitar Splitter (76 comments)- Clinking input with 1 Mohm input impedance- Output AMP1 as parallel circuit- Output AMP2 is electronically converted with a subsequent transformer stage- Operation with 9V battery recommended- 5 years manufacturing guarantee |
|
| the t.racks : VM-100 Voltage Meter (580 comments)
Voltage Meter- LED Power indicator- With pull-out lamps as rack lighting- 8x Integrated IEC sockets on the rear panel (switchable by switches on front)- Filter to protect the connected equipment from interference and voltage peaks- Resettable electronic 10 A fuse against overloading- Control of the ...(+) Voltage Meter- LED Power indicator- With pull-out lamps as rack lighting- 8x Integrated IEC sockets on the rear panel (switchable by switches on front)- Filter to protect the connected equipment from interference and voltage peaks- Resettable electronic 10 A fuse against overloading- Control of the supply voltage by three-color LED chain- Width: 19"- Height: 1U |
|
| Millenium : SP 31 (211 comments)- Input: 1x XLR female- Output: 3x XLR male- Ground lift switch- Implementation of 48 V phantom via the THRU Out- Dimensions: 125 x 90 x 45 mm |
|
| Radial Engineering : LX-2 (1 comments)- XLR / jack combi input- 2 XLR outputs- Switchable gnd / lift per output- Jensen transformer- Frequency range: 20 - 20,000 Hz- Dynamic range:140 dB- Robust metal housing- Dimensions: 84 x 127 x 48 mm |
|
| Palmer : PRM-LS Line-Splitter (10 comments)Passive 4 channel line splitter- Nominal impedance 600 ohms- Max. input +20 dB- 19" / 1U- On the front of each channel: 1 Input + 1 thru (for phantom power transmission), 2x isolated outputs- 5 Year warranty |
|
| ART : S8 Microphone Splitter (54 comments)
- From eight symmetrical microphone signals (low impedance) -> 16 microphone signals (8 pairs)- Direct output and a galvanic isolated output per transformer on each channel- Transit of phantom power to the main output- Ground-lift switch for the isolated output- Switchable attenuation (pads) on each...(+) - From eight symmetrical microphone signals (low impedance) -> 16 microphone signals (8 pairs)- Direct output and a galvanic isolated output per transformer on each channel- Transit of phantom power to the main output- Ground-lift switch for the isolated output- Switchable attenuation (pads) on each input- Format: 19" / 1U |
|
| ART : Prosplit (28 comments)- 1 Channel- 1 Direct and 1 transformer-isolated output- Phantom power is fed to the microphone via the Direct Out- Ground lift- PAD switch per input |
|
| Radial Engineering : JS 3 (11 comments)- Jensen transmitter for high sound quality- Connectors: XLR in / thru / out- Switchable 30 dB pad- Switchable Gnd / Lift- Robust metal housing- Installation of up to 8 units is possible with the 2 U / 19" Radial J-Rack |
|
| Palmer : MI DMS - Suitable as a switch for communication with technicians, as a splitter for different microphone inputs and for different zones, and more- 1 XLR input- 2 XLR outputs- Foot switch - switches only when pressed- With Ground / Lift switch |
|
| Millenium : MS8
- Consists of eight balanced low-impedance microphone signals 16 microphone signals (8 pairs)- Direct output and a transformer-isolated output in each channel- Passing the phantom power to the main output- Ground-lift switch for the separate output- Switchable damping (PAD) in each input- Format: 19...(+) - Consists of eight balanced low-impedance microphone signals 16 microphone signals (8 pairs)- Direct output and a transformer-isolated output in each channel- Passing the phantom power to the main output- Ground-lift switch for the separate output- Switchable damping (PAD) in each input- Format: 19"/ 1U |
|
| Palmer : PPB 20 Press-Box (1 comments)
Press Box- Audio distribution- Is used for press conferences to distribute 1 red microphone to 20 send stations or recording devices galvanically separated- 2 x Inputs: XLR / f (one balanced input for microphone and line level, optionally switchable)- GND lift switch- Outputs: 20 XLR / m, transforme...(+) Press Box- Audio distribution- Is used for press conferences to distribute 1 red microphone to 20 send stations or recording devices galvanically separated- 2 x Inputs: XLR / f (one balanced input for microphone and line level, optionally switchable)- GND lift switch- Outputs: 20 XLR / m, transformer-balanced with GND-lift switch, Nominal output level: +4 dBu at 0 dB- Display of the LED chain- Maximum output level: +20 dBu- Nominal output impedance: 300-ohm- 2 x Stereo connector balanced / unbalanced, nominal level -10dBu- 2 x RCA jack unbalanced isolated / ungrounded, nominal level -10dBu- Headphone output- Power supply +/- 12VDC or 230VAC- Size: 19"/ 3U- 5 Years manufacturer's guarantee |
|
| Radial Engineering : HotShot DM1 (25 comments)- Pedal for dynamic microphones and line signals- Suitable as splitter- Switchable GDN lift- Connections: XLR in/ out- Suitable as talkback for communication between musician and crew or to mute hardware as vocalists etc. |
|
| Millenium : SML 21 (80 comments)- 2-Channel merge box for line signal- Inputs: 2 XLR female- Output: 1 XLR male- Dimensions: 125 x 90 x 45 mm |
|
| Radial Engineering : X-AMP (82 comments)Active re-amping box- Splitter for guitar amps- Converts a +4 dB signal into a hi-impedance signal for guitar amplifiers or effects pedals- 1x XLR in- 2x Jack out- Phase reverse- Output gain- Attenuation 10 dB to 60 dB- Incl. power supply |
|
| Klark Teknik : DS 50 (12 comments)- 1 XLR input- 5 XLR outputs- Neutrik connectors- Sturdy, compact aluminum housing with protective corners made of hard rubber- Dimensions (W x H x D): 118 x 64 x 112 mm- Weight: 0.43 kg |
|
| Drawmer : 4X4 KickBox (4 comments)
- 4 In / 16 Out- 4 Studio Grade Mic / Line Preamps- 48V switchable- Headphone output per input switchable- For each channel 4 outputs (also 1 In / 16 Out or 1 In / 12 Out + 1 in / 4 Out or 2 In / 8 Out or 4 In / 4 Out each)- LED chain per input- Built in the PVC road case- Output transmitter optiona...(+) - 4 In / 16 Out- 4 Studio Grade Mic / Line Preamps- 48V switchable- Headphone output per input switchable- For each channel 4 outputs (also 1 In / 16 Out or 1 In / 12 Out + 1 in / 4 Out or 2 In / 8 Out or 4 In / 4 Out each)- LED chain per input- Built in the PVC road case- Output transmitter optional! |
|
| Palmer : Pro RMMS 8 (8 comments)
- Low-noise- 8 Balanced XLR inputs- Each to a direct output and a transformer isolated output- Combine 2 channels to double or sum the outputs- Ground lift per channel- Suitable for phantom-powered condenser microphones and DI boxes- A total of 16 XLR outputs- Dimensions: 19", 1 U- Case depth: 73 mm...(+) - Low-noise- 8 Balanced XLR inputs- Each to a direct output and a transformer isolated output- Combine 2 channels to double or sum the outputs- Ground lift per channel- Suitable for phantom-powered condenser microphones and DI boxes- A total of 16 XLR outputs- Dimensions: 19", 1 U- Case depth: 73 mm- Weight: 1.3 kg |
|