Free sheet music
My account (login)





Fantek
This brand is available on following categories :

By Shop
Most consulted brands
FREE SHEET MUSIC
 160,000+ free sheet music
SHEET MUSIC STORE
 1,000,000+ items
DIGITAL SHEET MUSIC
 900,000+ buy and print instantly
MUSICAL INSTRUMENTS
 200,000+ items

Search Musical Equipment
Active filters for search:

 
EQUIPMENT Brands › Fantek (brand)
Sorted and Filters :
10 accessories found - results for FRANCE (Change geographical area)

Fantek : FTT106B05D Tower Lift 225kg
(3 comments)
- 5 Sections- 4 Telescopic elements- Material: Steel- Max. height: 6.40 m- Min. height: 1.84 m- Maximum top load: 225 kg- Minimum top load: 25 kg- Base size when open: 2.53 x 2.53 m- Base size when closed: 0.46 x 0.46 m- Own weight: 94 kg- Winch: ALKO 901- Holder for truss adapter with 35 mm spigot-...(+)
1529.00€ - Sold by Thomann
In Stock (24 hours)
Similar Items
Fantek : FT 6033 Fork Lift 6m 330kg
- Lifts equipment weighing up to 330 kg by up to 6 m- If the tower is completely extended without load, then fixed, and the equipment is then lifted with the help of a chain hoist, the load capacity can be increased to 455 kg (tower mode)- With Dynamic Overlap function- With wire drive function- Dyn...(+)
3444.00€ - Sold by Thomann
In Stock (24 hours)
Similar Items
Fantek : Truss Adapter f. T100 - T106
(29 comments)
- Suitable for stands for T100 - T106 or for stands with 35 mm pivot mount- U-clamps suitable for trusses with a main tube diameter of 25 - 40 mm (recommended 40 mm)
93.00€ - Sold by Thomann
In Stock (24 hours)
Similar Items
Fantek : FTT103B05D Tower Lift 150kg
- 3 Sections- 2 Telescopic elements- Material: Steel- Max. height: 5.30 m- Min. height: 1.75 m- Maximum top load: 150 kg- Minimum top load: 25 kg- Base size when open: 2.08 x 2.08 m- Base size when closed: 0.37 x 0.37 m- Own weight: 41.5 kg- Winch: ALKO 351- Holder for truss adapter with 35 mm spigo...(+)
935.00€ - Sold by Thomann
On order
Similar Items
Fantek : FTT105B05D Tower Lift 225kg
- Four sections- Three extracts- Material: Steel- Max. height: 5.3 m- Min. height: 1.77 m- Max. load: 225 kg- Min. load: 25 kg- Base when open: 2.11 x 2.11 m- Base when closed: 0.46 x 0.46 m- Own weight: 84.5 kg- Winch: ALKO 901- Adapter for truss adapter with 35 mm spigot- With Dynamic Overlap func...(+)
1379.00€ - Sold by Thomann
In Stock (24 hours)
Similar Items
Fantek : FTT102B05D Tower Lift 100kg
(1 comments)
- Three sections- Two extracts- Material: Steel- Maximum height: 5.00 m- Minimum height: 1.99 m- Maximum load: 100 kg- Minimum load: 25 kg- Footprint (open): 2.06 x 2.06 m- Floor space (closed): 0.36 x 0.36 m- Dead weight: 31.5 kg- Winch: ALKO 351- Adapter for truss adapter with 35 mm spigot- With D...(+)
777.00€ - Sold by Thomann
In Stock (24 hours)
Similar Items
Fantek : FTT101B05D Tower Lift 100kg
- Three sections- Two telescopic elements- Material: Steel- Maximum height: 3.80 m- Minimum height: 1.29 m- Maximum top load: 100 kg- Minimum top load: 25 kg- Base surface, open: 1.57 x 1.57 m- Base surface, closed: 0.20 x 0.20 m- Own weight: 24.5 kg- Winds: ALKO 351- Connector for truss adapter wit...(+)
739.00€ - Sold by Thomann
On order
Similar Items
Fantek : Truss Adapter f. Tower Lifts
(1 comments)
- Tube adapter: 48 - 50 mm- For forks with a cross section of 45 x 45 mm- Suitable for T107, T108 (Not for T108PA), T109, 116, 117, T117PA, FT 5323 / 6520 / 6033 / 7045
38.00€ - Sold by Thomann
In Stock (24 hours)
Similar Items
Fantek : ATF17PAM Line Array Adapter
- Suitable for Fantek fork lifts FT 5323 / 6525 / 6033 / 7045- For forks with a cross-section 45 x 45 mm
176.00€ - Sold by Thomann
In Stock (24 hours)
Similar Items
Fantek : FT 7045 Fork Lift 7m 450kg
- Lifts equipment of up to 450 kg up to 7 m- The load bearing capacity can be increased to 515 kg (tower mode) when the tower is in a fully extended position (without any load) and fixed into place. Loads must be then lifted with the aid of a chain hoist.- Dynamic Overlap function- Wire Drive functi...(+)
3555.00€ - Sold by Thomann
On order
Similar Items