|
53 accessoires trouvés - résultats pour la FRANCE (Changer la zone géographique) | Ape Labs : Connect Grey (17 commentaires)
Convient pour le contrôle des produits Ape Labs via smartphone, Wireless DMX et KNX- 2x Connect peuvent être connectés en tant que système DMX sans fil en tant qu'émetteur et récepteur- Batterie intégrée avec une autonomie allant jusqu'à 50 heures par charge- Possibilité d'utiliser jusqu'Ã...(+) Convient pour le contrôle des produits Ape Labs via smartphone, Wireless DMX et KNX- 2x Connect peuvent être connectés en tant que système DMX sans fil en tant qu'émetteur et récepteur- Batterie intégrée avec une autonomie allant jusqu'à 50 heures par charge- Possibilité d'utiliser jusqu'à quatre Connect en parallèle- Convient pour contrôler un maximum de quatre univers DMX- Réalisation de mises à jour du micrologiciel des appareils Ape Labs et du Connect via l'application- Entrée et sortie DMX : XLR 3 broches- Alimentation électrique via le bloc d'alimentation fourni ou la batterie intégrée- Fabriqué en aluminium et en acier galvanisé- Dimensions : 12,5 x 12,5 x 4,8 cm- Poids : 0,72 kg- Couleur du boîtier : gris anthracite- 1x Connect- 1x bloc d'alimentation Ape Labs PSU de 27 Watt- 2x Antennes 2,4GHz | | | Ape Labs : Battery Pack Ni-MH 7.2 V (1 commentaires)
Pièce de rechange pour ApeLight Mini V1 & V2 & WAPP & CONNECT- Ni-MH 7,2 V - 2 200 mAh (15,84 Wh)- Dimensions (H x L x P): 40 x 55 x 30 mm
| | | Ape Labs : Universal Stand grey
Ape Labs Universal Stand grey; Universal stand for ApeLight mini, ApeLight Maxi, ApeStick, LightCan, ApeCoin; Suitable for all V1 and V2 lamp generations; Adapter piece for vertical ApeStick mounting included; Mounting for ApeLight Mini / ApeLight Maxi included; Thread adapter 3/8" to M6 for LightCa...(+) Ape Labs Universal Stand grey; Universal stand for ApeLight mini, ApeLight Maxi, ApeStick, LightCan, ApeCoin; Suitable for all V1 and V2 lamp generations; Adapter piece for vertical ApeStick mounting included; Mounting for ApeLight Mini / ApeLight Maxi included; Thread adapter 3/8" to M6 for LightCan and ApeCoin included; Telescopic tube adjustable from 106 cm to 200 cm; Mounting of all Ape Labs lights also possible directly on the base plate with the respective adapter; Telescopic tube made of galvanized steel (magnetic); Base plate made of galvanized steel; Note: With the Ape Labs Magnet Ball Adapter, LightCan and ApeCoin can be tilted in all directions (Not included); Note: This item does not include a light source; Dimensions base plate: 290 x 290 x 2 mm; Dimensions telescopic tube: 1060 mm to 2000 mm, diameter 20 mm; Weight: 3 kg; Scope of delivery: 1 x base plate, 1 x telescopic tube, 1 x design screw 3/8" - 6mm, 4 x felt sticker feet, 1 x ApeStick aluminum adapter, 1 x adapter screw 3/8" to M6, 2 x knurled screw M6, 2 x knurled screw 3/8" | | | Ape Labs : Battery Pack Ni-MH 9.6 V Pour ApeStick 4 & ApeStick SE- Batterie Ni-MH- 9,6 V- 2200 mAh (21,12 Wh)
| | | Ape Labs : Maxi V1 and V2 Battery Pack Ape Labs ApeLight Maxi V1 & V2 Battery Pack Ni-MH 12 V 4500 mAh (54 Wh) for ApeLight Maxi V1 & V2; Dimensions: 12.8 x 9.5 x 2.5 cm; Weight: 0.8kg
| | | Ape Labs : Connect Creme (4 commentaires)
Convient pour le contrôle des produits Ape Labs via smartphone, Wireless DMX et KNX- 2x Connect peuvent être connectés en tant que système DMX sans fil en tant qu'émetteur et récepteur- Batterie intégrée avec une autonomie allant jusqu'à 50 heures par charge- Possibilité d'utiliser jusqu'Ã...(+) Convient pour le contrôle des produits Ape Labs via smartphone, Wireless DMX et KNX- 2x Connect peuvent être connectés en tant que système DMX sans fil en tant qu'émetteur et récepteur- Batterie intégrée avec une autonomie allant jusqu'à 50 heures par charge- Possibilité d'utiliser jusqu'à quatre Connect en parallèle- Convient pour contrôler un maximum de quatre univers DMX- Réalisation de mises à jour du micrologiciel des appareils Ape Labs et du Connect via l'application- Entrée et sortie DMX : XLR 3 broches- Alimentation électrique via le bloc d'alimentation fourni ou la batterie intégrée- Fabriqué en aluminium et en acier galvanisé- Dimensions : 12,5 x 12,5 x 4,8 cm- Poids : 0,72 kg- Couleur du boîtier : blanc crème- 1x Connect- 1x bloc d'alimentation Ape Labs PSU de 27 Watt- 2x Antennes 2,4GHz | | | Ape Labs : Magnet Ballhead Adapter (26 commentaires)Rotule pivotante pour module LED ApeCoin- Adaptateur à rotule permettant de fixer un ApeCoin à tout objet métallique- Force d'adhérence de 8 kg- Filetage M6- Dimensions: 56 x 33 x 46 mm- Poids: 0,3 kg
| | | Ape Labs : ApeLight mini Tube V2
Tube amovible de 1 mètre qui distribue la lumière de l'ApeLight Mini V2 à 360° sur toute la longueur du tube- Est monté avec une pièce d'adaptation en acier inoxydable (incl.)- Matériau robuste et incassable- Embout en aluminium- La stabilité du tube est assurée par le poids de l'ApeLight M...(+) Tube amovible de 1 mètre qui distribue la lumière de l'ApeLight Mini V2 à 360° sur toute la longueur du tube- Est monté avec une pièce d'adaptation en acier inoxydable (incl.)- Matériau robuste et incassable- Embout en aluminium- La stabilité du tube est assurée par le poids de l'ApeLight Mini V2- La pièce d'adaptation et le tube peuvent être séparés l'un de l'autre pour permettre un transport peu encombrant- L'ApeLight Mini V2 peut également être utilisé sans le tube lorsque l'adaptateur est monté et peut être chargé dans le flight case de tournée ou une mallette Peli- Grâce à son design précieux, le tube peut être utilisé dans de nombreux domaines d'application- Dimensions du tube: 1000 x 50 x 50 mm- Poids du tube: 70 g- 1 tube avec embout- 1 pièce d'adaptation- 1 adaptateur X-plate pour ApeLight Mini V2 | | | Ape Labs : Table Tube Adapter V2 (12 commentaires)Pour ApeCoin V1 / V2 & LightCan V1 / SE / V2 ainsi qu'au Fun Generation LED Puck
| | | Ape Labs : ApeStick adapter for base
Ape Labs ApeStick - adapter for base plate & microphone stand; Adapter for mounting the ApeStick on a base plate or microphone stand; Bottom thread hole for 3/8" - depth min. 13mm; Suitable for all ApeStick versions. ApeStick 4, L, XL; Adapter piece for upright mounting of the ApeStick; Revised desi...(+) Ape Labs ApeStick - adapter for base plate & microphone stand; Adapter for mounting the ApeStick on a base plate or microphone stand; Bottom thread hole for 3/8" - depth min. 13mm; Suitable for all ApeStick versions. ApeStick 4, L, XL; Adapter piece for upright mounting of the ApeStick; Revised design. ApeStick can be fixed with a knurled screw to prevent it from falling out; Note: This one Item does not include bulb and base plate Package Contents: 1 x ApeStick Aluminum Adapter 1 x M6 Knurled Screw; | | | Ape Labs : Power Supply Unit 18V 1.5A (13 commentaires)
Convient pour lampes Ape Labs- Les modèles LightCan, ApeStick4 et ApeLight mini peuvent être connectés via le splitter disponible en option afin de charger plusieurs unités avec un chargeur- Alimentation pour modèles: MobiLight4, W-APE Transceiver, LightCan (avec splitter 2-voix-/4-voix: 4 appa...(+) Convient pour lampes Ape Labs- Les modèles LightCan, ApeStick4 et ApeLight mini peuvent être connectés via le splitter disponible en option afin de charger plusieurs unités avec un chargeur- Alimentation pour modèles: MobiLight4, W-APE Transceiver, LightCan (avec splitter 2-voix-/4-voix: 4 appareils), ApeStick4 (avec splitter pour 2 appareils), ApeLight mini(avec splitter 2-voix-/4-voix: 4 appareils)- Spécifications:- CE, UL, US LISTED, TÜV, GS, FCC Part15, Class B- Entrée: CA 100-240V 50/60Hz 0.4A- Sortie: DC 18V 1.5A | | | Ape Labs : Remote Control V2 Grey (3 commentaires)
Convient pour tous les produits Ape Labs- Communique par radio dans la bande 2,4 GHz avec les lampes Ape Labs- Tous les produits Ape Labs peuvent être divisés en 4 groupes au maximum, chacun pouvant être contrôlé de manière synchrone ou séparément- Gestion de 4 groupes- Portée : 30 m- Possi...(+) Convient pour tous les produits Ape Labs- Communique par radio dans la bande 2,4 GHz avec les lampes Ape Labs- Tous les produits Ape Labs peuvent être divisés en 4 groupes au maximum, chacun pouvant être contrôlé de manière synchrone ou séparément- Gestion de 4 groupes- Portée : 30 m- Possibilité d'appairage (couplage) entre la télécommande et une ou plusieurs lampes (pas de limite)- Bande 2,4 GHz (2.400 - 2.485 MHz)- Dimensions : 8,54 x 5 x 0,6 cm- Poids : 24 g- Matériau : plastique- couleur : gris anthracite- Pile (CR2025) fournie- Fabriqué en Allemagne | | | Ape Labs : WAPP / Connect Antenne Ape Labs WAPP / Connect Antenna
| | | Ape Labs : ApeStick Metal Sheet Plaque métallique pour fixer un ApeStick sur des surfaces non magnétiques- Dimensions: 50 x 35 mm
| | | Ape Labs : Pinspot Adapter 7° (3 commentaires)Pour pinspot- Angle de faisceau: 7°- En polyoxyméthylène- Dimensions: 120 x 55 mm- Poids: 142 g- GU10- ApeCoin V1- ApeCoin V2- LightCan V1- LightCan SE- LightCan V2- TableLight V1- TableLight V2
| | | Ape Labs : Maxi V1 Face (1 commentaires)Pièce détachée pour ApeLight maxi V1- Dimensions: 130 x 130 mm- Hauteur: 4 mm
| | | Ape Labs : 10 degree lens for LightCan (41 commentaires)
Avec la lentille de 10 degrés d' Ape Labs, il est possible de créer un angle de faisceau plus étroit avec un éclairage vers le haut, combiné à des bords doux et à un mélange de couleurs très homogène- Fabriqué en Allemagne- Se visse sur le LightCan et remplace l'objectif standard fourni- ...(+) Avec la lentille de 10 degrés d' Ape Labs, il est possible de créer un angle de faisceau plus étroit avec un éclairage vers le haut, combiné à des bords doux et à un mélange de couleurs très homogène- Fabriqué en Allemagne- Se visse sur le LightCan et remplace l'objectif standard fourni- S'adapte sur chaque LightCan- Angle du faisceau : 10°- Mélange de couleurs homogène- Contenu de la livraison : 1x 10 degrés | | | Ape Labs : ApeStick 4 Magnet Ape Labs ApeStick 4 Magnet (without ring) ; Spare part for ApeStick4 ; Replacement magnet ; diameter: 25 mm ; height: 15mm
| | | Ape Labs : Dome Adapter (6 commentaires)Accessoire adapté pour ApeCoin et LightCan
| | | Ape Labs : Effect Lens 65° Can / Coin V1 Pour Ape Labs Light Can / Coin- Diamètre: 52 mm- Hauteur: 2 mm
| |
|