Low-noise amplification with up to 75 dB- High-performance 3.5 mm headphone output for latency-free monitoring- 48 V phantom power- Switchable low-cut filter- Capacitive button mutes the microphone when touched- Frequency response: 20 - 20,000 Hz- Dynamic range: 100 dB (120 dB with Clipguard)- Resolution: 24 bit- Sample rate: 48/96 kHz- Interface: USB-C- System requirements: Windows 10 (64 bit),macOS 10.15 or newer, USB 3.0 or higher.- Dynamic voice microphone for content creators, streamers, podcasters and commentators- Integrated pop filter- Polar pattern: cardioid- Frequency response: 50 - 15,000 Hz- Sensitivity: 2.5 mV/Pa - 52 dbV/Pa- Impedance: 600 Ohm- XLR connector- Detachable and rotatable logo- Incl. 5/8" bracket with 3/8" and 1/4" adapter- Dimensions: 53 x 53 x 146 mm- Weight: 440g- Rotates 360° horizontally and 90° vertically- Integrated cable channels with magnetic covers- Robust metal construction- Swing and drop resistance adjustable at joints- Padded desk clamp with 60 mm range- Ball joint head with 1/4" thread and adapters for 3/8" and 5/8"- Horizontal reach: 740 mm- Distance lower arm to desk: 70 mm- Distance upper arm to desk: 160 mm- Supports microphones and accessories weighing up to 2 kg- Length: 3 m- XLR 3-pin male < - > XLR 3-pin female- Colour: Black

Low-noise amplification with up to 75 dB- High-performance 3.5 mm headphone output for latency-free monitoring- 48 V phantom power- Switchable low-cut filter- Capacitive button mutes the microphone when touched- Frequency response: 20 - 20,000 Hz- Dynamic range: 100 dB (120 dB with Clipguard)- Resolution: 24 bit- Sample rate: 48/96 kHz- Interface: USB-C- System requirements: Windows 10 (64 bit),macOS 10.15 or newer, USB 3.0 or higher.- Dynamic voice microphone for content creators, streamers, podcasters and commentators- Integrated pop filter- Polar pattern: cardioid- Frequency response: 50 - 15,000 Hz- Sensitivity: 2.5 mV/Pa - 52 dbV/Pa- Impedance: 600 Ohm- XLR connector- Detachable and rotatable logo- Incl. 5/8" bracket with 3/8" and 1/4" adapter- Dimensions: 53 x 53 x 146 mm- Weight: 440g- Swivel arm for microphones- Individually adjustable arm with rotating base- Internal springs and hidden cable ducts- Maintains microphone position when height is adjusted- Adjustable counterweight matches arm tension to microphone weight- Padded table clamp with 60 mm range- Ball joint head with 1/4" thread and adapters for 3/8" and 5/8"- Horizontal reach: 780 mm- Vertical reach: 750 mm (without height extension)- Height extension: 150 mm- Length of lower arm: 400 mm- Length upper arm: 400 mm- Supported microphone weight: 0.25 kg to max. 1 kg (with accessories)- Length: 3 m- XLR 3-pin male < - > XLR 3-pin female- Colour: Black