Description from Thomann
Clearsonic A2466x6 Drum Shield 6-Segment panel -
For live and studio applications -
Noise and sound shielding of drum kits, amplifiers or instruments -
Easy handling by folding accordion-style hinge -
Made out of high quality laser-cut acrylic -
Consists of 6 panels with connectors (Hinges) -
Thickness: 6,35 mm -
Height: 1670 mm -
Width: 600 mm -
Indispensable for volume control on the stage and in the studio for a clean mix -
Weight: Approximately 46 kg
Clearsonic AX2412x6 Extender Panel Extension -
Panel to extend A2448 and A2466 panels -
Made of high-quality, laser-cut acrylic -
Consisting of 6 panels with hinge and 6 H-channels -
Dimensions per panel (H x W): 300 x 600 mm -
Thickness: 6.35 mm -
Illustrations show the panels partly with protective foil
3x Clearsonic S2466x2 Sorber Two-Section Absorber Panel -
Made of compressed fibreglass and encased in dark gray cloth -
Both panels are joined together with a fabric tape and can be used freestanding -
The panel can also be mounted on the inside of the acrylic ClearSonic shields to reduce the amount of reflected sound, or used as sound absorbers on the walls of a studio, basement, church etc. -
Dimensions per piece: 1670 x 609 x 38 mm -
Colour: Dark grey / Anthracite
Clearsonic ST2466 Sorber - twin pack Absorber Tiles Panels, Pack of 2 -
Made of compressed fibreglass and encased in dark grey cloth -
This Sorber is mainly used as a side lid section for the ClearSonic lid system (LidPac) -
Panels are trapezium-shaped on one side -
Dimensions per piece: 1670 x 609 x 38 mm -
Colour: Dark grey / Anthracite -
Set of 2 pieces
Clearsonic S2466 Sorber Absorber Panel -
Made of compressed fibreglass and encased in dark grey cloth -
The Sorber is mainly used as a centre piece for the ClearSonic cover system (LidPac) -
But can also be used as a sound absorber on the walls of a studio, cellar, church, etc. -
Dimensions: 1670 x 609 x 38 mm -
Colour: Dark grey / Anthracite
2x Clearsonic S2224 Sorber 2-pack Absorber Panel -
Made of compressed fibreglass and encased in dark grey cloth -
The panel can also be mounted on the inside of the acrylic ClearSonic shields -
For reducing the amount of reflected sound, but can also be used as a sound absorber on the walls of a studio, cellar, church, etc. -
With the hook and loop fastener connectors (included), panels can easily be attached to almost any smooth surface -
Dimensions: 609 x 558 x 38 mm -
Colour: Dark grey / Anthracite -
2 Pieces
Clearsonic Standard Support Bar Telescopic Rod -
Telescopic rod for supporting cover panels -
Variable length of 1530 mm to 2440 mm
Thomann Clip Ventilator Clip Fan -
2-Speed air circulation fan for clipping on -
Suitable for Clearsonic ISO- and MEGA-Pacs -
Diameter: 18 cm -
Low-noise
|